Federal Aviation Administration 2022 – Federal Register Recent Federal Regulation Documents

The FAA is adopting a new airworthiness directive (AD) for all Schempp-Hirth Flugzeugbau GmbH Model Ventus-2a and Ventus-2b gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as severe corrosion on the inboard flaperon actuation push rods and ball bearing connecting the flaperon push rod to the bell crank inside the wing. This AD requires inspecting the affected parts of the flaperon control in the wings and taking corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This action changes the effective date of a final rule published in the Federal Register on September 8, 2021, amending airspace for several airports in the south Florida area. The FAA is delaying the effective date to coincide with the completion of ongoing airspace projects in the area.

This action establishes Class E airspace extending upward from 700 feet above the surface for Falmouth Airpark, Falmouth, MA, to accommodate area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.

This action modifies the Class D and Class E surface airspace at Southwest Oregon Regional Airport, North Bend, OR. It also modifies the Class E airspace by establishing an area that is designated as an extension to a Class D or Class E surface area, and modifies the Class E airspace extending upward from 700 feet above the surface. Lastly, this action removes navigational aids (NAVAID) from the legal description of the Class E2 and Class E5 text headers, updates the Class D, Class E2, and Class E5 airspace legal descriptions, and establishes Class E4 airspace. This action ensures the safety and management of instrument flight rules (IFR) operations within the National Airspace System.

This action amends Class E airspace extending upward from 700 feet above the surface for Atlanta Speedway Airport (formerly Clayton County-Tara Field), Hampton, GA by updating the airport's name and geographical coordinates to coincide with the FAA's database. This action also increases the radius and removes excessive verbiage from the legal description of the airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.

This action proposes to amend the Class E airspace at Hugoton, KS. The FAA is proposing this action as the result of an airspace review as part of the decommissioning of the Hugoton non-directional beacon (NDB). The geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.

The FAA proposes to extend through October 29, 2022, the Coronavirus (COVID-19)-related limited, conditional waiver of the minimum slot usage requirement at John F. Kennedy International Airport (JFK), New York LaGuardia Airport (LGA), and Ronald Reagan Washington National Airport (DCA) that the FAA has already made available through March 26, 2022, for international operations only. Similarly, the FAA proposes to extend through October 29, 2022, its COVID-19-related limited, conditional policy for prioritizing flights canceled at designated International Air Transport Association (IATA) Level 2 airports in the United States, for purposes of establishing a carrier's operational baseline in the next corresponding season, for international operations only. These IATA Level 2 airports include Chicago O'Hare International Airport (ORD), Los Angeles International Airport (LAX), Newark Liberty International Airport (EWR), and San Francisco International Airport (SFO). This relief would be limited to slots and approved operating times used by any carrier for international operations only, through October 29, 2022, and would be subject to the same terms and conditions, that the FAA has already applied to the relief that remains available through March 26, 2022.

This notice announces a meeting of the Women in Aviation Advisory Board (WIAAB or the Board).

This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion nor omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd. & Co KG (RRD) Trent 7000-72 and Trent 7000-72C model turbofan engines. This proposed AD was prompted by in-service experience showing that certain high-pressure turbine (HPT) blades may prematurely deteriorate to an unacceptable condition when managed in accordance with the inspection intervals in the Time Limits Manual (TLM). This proposed AD would require initial and repetitive on- wing borescope inspections (BSIs) of the HPT blades to detect axial cracking and, depending on the results of the inspections, replacement of the HPT blade set, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). This proposed AD would also require replacement of the HPT blade set before exceeding a specified number of flight cycles. The FAA is proposing this AD to address the unsafe condition on these products.

This action proposes to amend the Class E airspace at Marshall, MI. The FAA is proposing this action due to an airspace review conducted as part of the decommissioning of the Litchfield very high frequency (VHF) omnidirectional range (VOR) as part of the VOR Minimal Operational Network (MON) Program.

This action proposes to amend the Class E airspace at Ashtabula, OH. The FAA is proposing this action due to an airspace review conducted as part of the decommissioning of the Jefferson very high frequency (VHF) omnidirectional range (VOR) as part of the VOR Minimal Operational Network (MON) Program. The name and geographic coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.

By Federal Register notice on January 7, 2022 the Federal Aviation Administration (FAA) and the National Park Service (NPS) invited interested persons to apply to fill one existing and two upcoming vacancies on the National Parks Overflights Advisory Group (NPOAG). This notice informs the public of the selection made for the two upcoming vacancies representing Native American and general aviation concerns. No selection was made for the existing opening representing Native American tribal concerns so this notice also invites persons interested in that opening to apply.

This document adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.

This action proposes to revoke Colored Federal airway Blue 79 (B-79) in the vicinity of Annette Island, AK due to the pending decommissioning of the Nichols, AK, (ICK) Non-directional Beacon (NDB).

This action adds the proposed amendment of jet route J-73 that was inadvertently omitted from the NPRM for Docket No. FAA-2021-1079. This action supports the VHF Omnidirectional Range (VOR) Minimum Operational Network (MON) program to improve the efficiency of the National Airspace System (NAS) and reduce dependency on ground-based navigational systems.

The FAA is superseding Airworthiness Directive (AD) 2021-06- 06, which applied to certain Bell Textron Canada Limited Model 505 helicopters. AD 2021-06-06 required repetitive fluorescent penetrant inspections (FPIs) of the pilot collective stick and grip assembly and revising the existing Rotorcraft Flight Manual (RFM) for your helicopter. Since the FAA issued AD 2021-06-06, the pilot collective stick and grip assembly has been redesigned. This AD retains certain requirements of AD 2021-06-06, requires modifying your helicopter to include the improved pilot collective stick tube and adds a terminating action for the repetitive FPIs. This AD also prohibits installing any pilot collective stick and grip assembly unless certain requirements of this AD are met. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain AVOX System Inc. (formerly Scott Aviation) oxygen cylinder and valve assemblies, and oxygen valve assemblies, installed on but not limited to various transport airplanes. This AD was prompted by reports of cylinder and valve assemblies having oxygen leakage from the valve assembly vent hole, caused by the absence of a guide that maintains appropriate spacing between certain parts. This AD requires an inspection of the oxygen valve assemblies, and oxygen cylinder and valve assemblies, to determine the serial number of the valve, cylinder, and entire assembly. For assemblies and parts with certain serial numbers, this AD requires a detailed inspection for correct spacing of the gap between the bottom of the packing retainer and top of the valve body on the assemblies, and replacement of assemblies having unacceptable gaps. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for all MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD was prompted by a report of an oxygen-fed ground fire event potentially caused by electrical arcing from a faulty surround light wire on the third crew member's (observer) oxygen mask. This proposed AD would require an inspection for discrepancies of the observer's oxygen mask stowage box and storage compartment, oxygen hose connections and routing, and the associated electrical harness, and corrective actions if necessary; and modifying the oxygen mask flexible lamp harness, mounting plate, and compartment panel, including rerouting the electrical harness and applying protective sealant. The FAA is proposing this AD to address the unsafe condition on these products.

The Department of Transportation (DOT), Federal Aviation Administration (FAA) announces the opportunity to apply for approximately $1 billion in FY 2022 discretionary funds for the newly established Airport Terminal Program (ATP), made available under the Infrastructure Investment and Jobs Act of 2021 (IIJA), Public Law 117- 58, herein referred to as the Bipartisan Infrastructure Law (BIL). The purpose of the ATP is to make annual grants available to eligible airports for airport terminal development projects that address the aging infrastructure of the nation's airports. In addition, ATP grants will align with DOT's Strategic Framework FY2022-2026 at www.transportation.gov/administrations/office-policy/fy2022-2 026- strategic-framework. The FY 2022 ATP will be implemented, as appropriate and consistent with law, in alignment with the priorities in Executive Order 14052, Implementation of the Infrastructure Investments and Jobs Act (86 FR 64355), which are to invest efficiently and equitably, promote the competitiveness of the U.S. economy, improve job opportunities by focusing on high labor standards, strengthen infrastructure resilience to all hazards including climate change, and to effectively coordinate with State, local, Tribal, and territorial government partners.

The FAA is adopting a new airworthiness directive (AD) for certain MARS A.S. emergency parachutes. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as the length of the ripcord between the pins being too long, which could cause a malfunction of the emergency parachute. This AD requires removing emergency parachutes with certain manufacture dates or serial numbers from service. The FAA is issuing this AD to address the unsafe condition on these products.

These special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is side-stick controllers for pitch and roll control. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, and - 900 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain web lap splices in the center dome apex of the aft pressure bulkhead are subject to widespread fatigue damage (WFD). This proposed AD would require a general visual inspection for existing repairs at the aft pressure bulkhead, repetitive detailed, high frequency eddy current (HFEC), and low frequency eddy current (LFEC) inspections, and repair if necessary. The FAA is proposing this AD to address the unsafe condition on these products.

The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.