Federal Aviation Administration February 2021 – Federal Register Recent Federal Regulation Documents
Results 51 - 100 of 111
Airworthiness Directives; MHI RJ Aviation ULC (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain MHI RJ Aviation ULC Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by evidence that a revised structural life limit of some components of the nose landing gear (NLG) and/or main landing gear (MLG) was not implemented during repair. This AD requires verifying that the affected components are installed on the airplane, revising the structural life limits in the existing structural deviation inspection requirements (SDIR) airplane document, and replacing affected components if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Revocation of Class E Airspace and Amendment of Class E Airspace; Lone Rock, WI
This action revokes the Class E surface airspace at Tri-County Regional Airport, Lone Rock, WI, and amends the Class E airspace extending upward from 700 feet above the surface at Tri-County Regional Airport and Richland Airport, Richland Center, WI. This action is the result of airspace reviews caused by the decommissioning of the Lone Rock VHF omnidirectional range (VOR) navigation aid as part of the VOR Minimum Operational Network (MON) Program. The names and geographic coordinates of the airport are also being updated to coincide with the FAA's aeronautical database.
Amendment of Class E Airspace; Kankakee, IL
This action amends the Class E airspace extending upward from 700 feet above the surface at Greater Kankakee Airport, Kankakee, IL. This action is the result of an airspace review caused by the decommissioning of the Kankakee VHF omnidirectional range (VOR) navigation aid as part of the VOR Minimum Operational Network (MON) Program.
Proposed Amendment of Class E Airspace; Hebbronville, TX
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Jim Hogg County Airport, Hebbronville, TX. The FAA is proposing this action as the result of an airspace review due to the decommissioning of the Hebbronville non- directional beacon (NDB).
Proposed Establishment and Revocation of Class E Airspace; North Dakota, ND
This action proposes to establish an enroute domestic airspace area over the State of North Dakota and remove the enroute domestic airspace areas at Harvey and Linton, ND. The FAA is proposing this action at the request of Salt Lake Air Route Traffic Control Center (ARTCC) and Minneapolis ARTCC to improve air traffic control services and support instrument flight rule (IFR) operations over the state.
Amendment of Class E Airspace and Revocation of Class E Airspace; Multiple Minnesota Towns
This action amends the Class E airspace extending upward from 700 feet above the surface at multiple Minnesota Towns and revokes the Class E airspace extending upward from 700 feet above the surface at Silver Bay Municipal Airport, Silver Bay, MN. This action is the result of airspace reviews caused by the decommissioning of multiple non- federal non-directional beacons (NDBs) within Minnesota. The names and geographic coordinates of various airports are also being updated to coincide with the FAA's aeronautical database.
Amendment of the Class E Airspace; Bradford, PA
This action amends the Class E airspace at Bradford Regional Airport, Bradford, PA. This action is the result of airspace reviews caused by the decommissioning of the Bradford VHF omnidirectional range (VOR) navigation aid as part of the VOR Minimum Operational Network (MON) Program.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as electrical harness installations on PC-24 airplanes that are not in compliance with the approved design. This unsafe condition could lead to wire chafing and potential arcing or failure of wires having the incorrect length, possibly resulting in loss of system redundancy, or generation of smoke and smell, or loss of power plant fire protection function. This AD requires modifying the electrical harness installation. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Piper Aircraft, Inc., (Piper) Models PA-46-350P (Malibu Mirage), PA- 46R-350T (Malibu Matrix), and PA-46-500TP (Malibu Meridian) airplanes. This AD was prompted by a finding of several airplanes with wing assemblies that did not have the proper stall warning heater modification design. Without the proper stall warning heat control modification kit installed, during flights into icing conditions with the landing gear down, ice can form on the stall vane, which may result in failure of the stall warning system. This AD requires identifying and correcting nonconforming stall warning heat control systems. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as improperly manufactured cockpit and cabin evaporator filters installed during production on some PC-24 airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace Corporation (Gulfstream) Model GVII- G600 airplanes. This proposed AD was prompted by a report that a failure mode in the data concentration network (DCN) software causes the pitch attitude value to freeze on the primary flight display (PFD) for up to 20 seconds. This proposed AD would require updating the DCN and flight deck master operating system (MOS) software. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for Pilatus Aircraft Ltd. (Pilatus) Model PC-12/47E airplanes. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as inboard flap fairings aft (IFFAs) having an incorrect shape, which may result in chafing between the IFFA and the associated front inboard tension rod. This AD requires an inspection of the IFFAs for the correct shape and chafing between the IFFA and the associated front inboard tension rod, with corrective action as necessary. This condition could lead to failure of the inboard flap drive arm with consequent asymmetric flap extension, resulting in reduced control of the airplane. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Class D Airspace, and Class E Airspace; Smyrna, TN
This action amends Class D airspace and Class E airspace extending upward from 700 feet above the surface at Smyrna Airport, Smyrna, TN. An evaluation of airspace in the area determined that this airport required an adjustment of Class D and E airspaces. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Proposed Amendment of Class D and Class E Airspace, and Proposed Establishment of Class E Airspace; Worcester, MA
This action proposes to amend Class D airspace, Class E surface airspace, and Class E airspace extending upward from 700 feet above the surface for Worcester Regional Airport, Worcester, MA, as an airspace evaluation of the area determined additional airspace is necessary. Also, this action proposes to establish Class E airspace extending upward from 700 feet above the surface for UMass Memorial Medical Center-University Campus Heliport, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.
Proposed Establishment of Class E Airspace; Taunton, MA
This action proposes to establish Class E airspace extending upward from 700 feet above the surface for Morton Hospital Heliport, Taunton, MA, to accommodate new area navigation (RNAV) global positioning system (GPS) standard instrument approach procedures (SIAPs) serving this heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area. This action would also update the name and geographic coordinates of Taunton Municipal Airport-King Field (formerly Taunton Municipal Airport), Taunton, MA.
Proposed Establishment of Class E Airspace; Crooked Creek, AK
This action proposes to establish Class E airspace extending upward from 700 feet above the surface of the earth at Crooked Creek Airport, Crooked Creek, AK. This action would accommodate new area navigation (RNAV) procedures and ensure the safety and management of instrument flight rule (IFR) operations within the National Airspace System.
Amendment of Class E Airspace; Dumas, AR
This action amends Class E airspace extending upward from 700 feet above the surface at Billy Free Municipal Airport, Dumas, AR. This action is the result of airspace reviews caused by the decommissioning of the Monticello very high frequency omnidirectional range (VOR) navigational aid as part of the VOR Minimum Operational Network (MON) Program.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (Type Certificate Previously Held by Rolls-Royce plc) Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) Trent XWB-75, Trent XWB-79, Trent XWB-79B, Trent XWB-84, and Trent XWB-97 model turbofan engines. This proposed AD was prompted by the manufacturer revising the time limits manual (TLM) to incorporate repairs to the low-pressure compressor (LPC) blades and introduce a new fan blade inspection. This proposed AD would require revisions to the airworthiness limitations section (ALS) of the Rolls-Royce (RR) Trent XWB TLM and the operator's existing approved aircraft maintenance program (AMP). The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of VOR Federal Airways V-12, V-74, and V-516 in the Vicinity of Anthony, KS
This action amends VHF Omnidirectional Range (VOR) Federal airways V-12, V-74, and V-516, in the vicinity of Anthony, KS. The modifications are necessary due to the planned decommissioning of the VOR portion of the Anthony, KS, VOR/Tactical Air Navigation (VORTAC) navigation aid (NAVAID), which provides navigation guidance for portions of the affected VOR Federal airways. The Anthony VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Revocation and Amendment of Class E airspace; Bucholz Army Airfield Kwajalein Atoll, Republic of the Marshall Islands
This action removes the Class E airspace designated as an extension to the Class D airspace and amends the Class E airspace extending upward from 700 and 1200 feet AGL at Bucholz AAF, Kwajalein Atoll, Republic of the Marshall Islands. The Class E airspace extending upward from 700 feet is amended to ensure it does not extend beyond 12 nautical miles from the outer shoreline of the Atoll into international airspace.
Proposed Amendment of Class E Airspace; Wellsville, NY
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Wellsville Municipal Airport/ Tarantine Field, Wellsville, NY. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Wellsville VHF omnidirectional range (VOR) navigation aids as part of the VOR Minimum Operational Network (MON) Program. The name and geographical coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Proposed Revocation of Class E Airspace; Mineola, TX
This action proposes to revoke the Class E airspace extending upward from 700 feet above the surface at Mineola Wisener Field, Mineola, TX. The FAA is proposing this action as the result of the cancellation of the instrument procedures at this airport.
Proposed Amendment of Class D and Revocation of Class E Airspace; Gila Bend, AZ
This action proposes to amend the Class D airspace and revoke the Class E airspace extending upward from 700 feet above the surface at Gila Bend AF Aux Airport, Gila Bend, AZ. The FAA is proposing this action as the result of a biennial review of the airspace. The geographic coordinates of the airport would be updated to coincide with the FAA's aeronautical database.
Proposed Amendment of Class E Airspace; Durant, OK
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Durant Regional Airport-Eaker Field, Durant, OK. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Texoma VHF omnidirectional range (VOR) navigation aids as part of the VOR Minimum Operational Network (MON) Program. The name and geographical coordinates of the airport would also be updated to coincide with the FAA's aeronautical database.
Petition for Exemption; Summary of Petition Received; National United States Armed Forces Museum
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 737 series airplanes, excluding Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracked or completely severed lugs in the upper aft corner stop fitting assembly of the forward entry door. This AD requires an inspection, a measurement, or a records check of that assembly to determine the part number, and replacement if a certain part is found. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; ATR-GIE Avions de Transport Régional Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain ATR-GIE Avions de Transport R[eacute]gional Model ATR72- 212A airplanes. This proposed AD was prompted by a report of an engine electrical control #1 fault during flight caused by chafing damage on an electrical harness bundle. This proposed AD would require modifying the electrical harness routes and de-icing pipe coupling installations, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
The FAA is adopting a new airworthiness directive (AD) for certain Airbus Helicopters Deutschland GmbH Model EC135P1, EC135P2, EC135P2+, EC135P3, EC135T1, EC135T2, EC135T2+, and EC135T3 helicopters. This AD requires removing certain Titanium (Ti) bolts from service and prohibits installing these Ti-bolts in a critical area. This AD was prompted by a report of a broken Ti-bolt. The actions of this AD are intended to address an unsafe condition on these products.
Airworthiness Directives; Saab AB, Support and Services (Formerly Known as Saab AB, Saab Aeronautics) Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Saab AB, Support and Services Model SAAB 2000 airplanes. This AD was prompted by a report of inadvertently reversed connections of the outboard and inboard channel harnesses of the wheel speed transducers in the main landing gear (MLG) wheel axles. This AD requires an inspection for correct installation of the MLG anti-skid system harnesses and corrective actions if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-700 series airplanes. This AD requires repetitive testing to verify correct operation of the smoke clearance mode of the equipment cooling system and low pressure environmental control system, and corrective actions if necessary. This AD also requires installing new relays and changing the wiring to the environmental control system, among other actions. This AD was prompted by a determination that a repetitive test is needed to assess the components on airplanes equipped with a certain air distribution system configuration. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; General Electric Company Turbofan Engines
The FAA proposes to adopt a new airworthiness directive (AD) for all General Electric Company (GE) CF6-80A, CF6-80A1, CF6-80A2, CF6- 80A3, CF6-80C2A1, CF6-80C2A2, CF6-80C2A3, CF6-80C2A5, CF6-80C2A5F, CF6- 80C2A8, CF6-80C2B1, CF6-80C2B1F, CF6-80C2B1F1, CF6-80C2B1F2, CF6- 80C2B2, CF6-80C2B2F, CF6-80C2B3F, CF6-80C2B4, CF6-80C2B4F, CF6-80C2B5F, CF6-80C2B6, CF6-80C2B6F, CF6-80C2B6FA, CF6-80C2B7F, CF6-80C2B8F, CF6- 80C2D1F, CF6-80C2K1F and CF6-80C2L1F model turbofan engines. This proposed AD was prompted by an inspection by the manufacturer that revealed cracking of the high-pressure turbine (HPT) rotor stage 1 disk. This proposed AD would require visual inspection and fluorescent penetrant inspection (FPI) of the HPT thermal shield and, if cracking is detected, removal from service of the HPT thermal shield, HPT rotor stage 1 disk and HPT rotor stage 2 disk. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. Model PC-7 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. This AD requires revising the Airworthiness Limitations section (ALS) of the existing aircraft maintenance manual (AMM) to introduce new mandatory repetitive inspections for the flap pivot arm assemblies and for certain wing angle brackets, and to implement a change to the Oxygen cylinder and pressure reducer task item. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca, S.A.) Turboshaft Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain Safran Helicopter Engines, S.A. (Safran Helicopter Engines) Arriel 2B, 2B1, 2C, 2C1, 2C2, 2S1 and 2S2 model turboshaft engines. This proposed AD was prompted by reports of non-conforming fuel filter pre-blockage pressure switches. This proposed AD would require repetitive visual inspections of the fuel filter by-pass indicator pop- up, a one-time operational test of the fuel filter pre-blockage pressure switch and, depending on the findings, replacement of the fuel filter pre-blockage pressure switch with a part eligible for installation. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Textron Aviation Inc. (Type Certificate previously held by Cessna Aircraft Company) Airplanes
The FAA is withdrawing a notice of proposed rulemaking (NPRM) and supplemental notice of proposed rulemaking (SNPRM) that proposed to supersede airworthiness directive (AD) 72-14-08 R1 for Cessna Aircraft Company (now Textron Aviation Inc.) Models 310, 320, 401, 402, 411, and 421 airplanes. AD 72-14-08 R1 requires repetitively inspecting the fuel and oil flexible hose lines for leakage or evidence of any damaged or deteriorated hose assembly on the above-referenced airplanes and replacing any discrepant part. Since issuance of the SNPRM, the FAA has not received any reports of fuel and oil flexible hose lines that leak or are damaged and has determined that the repetitive inspections required by AD 72-14-08 R1 address the unsafe condition. Accordingly, the NPRM and SNPRM are withdrawn.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A330-200 Freighter series airplanes. This proposed AD was prompted by a report indicating occurrences of broken brackets of the support structure of the halon fire extinguishing bottle 4005WX; investigation showed that fatigue cracks initiated in the attachment brackets at the cross beams due to dynamic loading, and in some cases propagated in the struts. This proposed AD would require replacing the support brackets of the 4005WX fire extinguisher bottle with reinforced support brackets, and replacing the strut assembly at the affected location, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Sikorsky Aircraft Corporation Model S-76A, S-76B, and S-76C Helicopters Modified by Supplemental Type Certificate SR09211RC
The FAA is withdrawing a notice of proposed rulemaking (NPRM) that proposed to adopt a new airworthiness directive (AD) that would have applied to all Sikorsky Aircraft Corporation (Sikorsky) S-76 model helicopters with a certain life raft deployment system (LRDS) installed per Supplemental Type Certificate (STC) SR09211RC. The NPRM was prompted by an incident that occurred where the handle bent prior to the life raft deploying, and this prohibited the crew from successfully deploying and using the life raft. It was determined that the handle in this incident was not manufactured to the approved Type Design. The NPRM would have required removing and replacing the pilot or co-pilot life raft deployment handle (handle) located on the left side of the ``broom closet'' of the helicopter. Since issuance of the NPRM, the FAA determined that, based on a review of the design approval holder's records, all of the handles have been replaced. Accordingly, the NPRM is withdrawn.
Proposed Establishment of Class E Airspace; Port Alsworth, AK
This action proposes to establish Class E airspace extending upward from 700 feet above the surface of the earth at Wilder/Natwick LLC Airport, Port Alsworth, AK. This action would accommodate new area navigation (RNAV) procedures and ensure the safety and management of instrument flight rule (IFR) operations within the National Airspace System.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2020-09-14, which applies to certain Airbus SAS Model A350-941 and - 1041 airplanes. AD 2020-09-14 requires revising the existing airplane flight manual (AFM) to define a liquid-prohibited zone on the flight deck and provide procedures following liquid spillage on the center pedestal. AD 2020-09-14 also requires installing a removable integrated control panel (ICP) cover on the flight deck and further revising the AFM to include instructions for ICP cover use. Since the FAA issued AD 2020-09-14, a new, water-resistant ICP has been developed. This proposed AD would require installing a new, water-resistant ICP, which would allow removing the ICP protective cover and the AFM revisions, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD requires repetitive general visual inspections of the bilge barriers located in the forward and aft cargo compartments for disengaged or damaged decompression panels, reinstallation of disengaged but undamaged decompression panels, and replacement of damaged decompression panels. This AD was prompted by reports of multiple incidents of torn decompression panels being found in the bilge area. The FAA is issuing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Federal Aviation Regulation Part 119-Certification: Air Carriers and Commercial Operators
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on November 4, 2020. Organizations that desire to become or remain certified as air carriers or commercial operators are mandated to report information to the FAA. The information collected reflects requirements necessary under parts 135, 121, and 125 to comply with Federal Aviation Regulation part 119Certification: Air Carriers and Commercial Operators. The FAA will use the information it collects and reviews to ensure compliance and adherence to regulations and, if necessary, to take enforcement action on violators of the regulations.
Deadline for Notification of Intent To Use the Airport Improvement Program (AIP) Primary, Cargo, and Nonprimary Entitlement Funds Available to Date for Fiscal Year 2021
This action announces March 15, 2021, as the deadline for each airport sponsor to notify the FAA if it will use its Fiscal Year (FY) 2021 entitlement funds (referred to as apportionments in 49 U.S.C. 47114) to accomplish Airport Improvement Program (AIP) eligible projects. Each sponsor has previously identified to the FAA such projects through the Airports Capital Improvement Plan process. This action further announces May 3, 2021, as the deadline for an airport sponsor to submit a final grant application to use FY 2021 entitlement funds.
Commercial Space Transportation Advisory Committee: Notice of Public Meeting
This notice announces a meeting of the Commercial Space Transportation Advisory Committee for March 23, 2021.
Airworthiness Directives; Airbus Helicopters
The FAA is adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS350B, AS350B1, AS350B2, AS350B3, AS350BA, AS350D, AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. This AD was prompted by the in-flight loss of a sliding door. This AD requires inspecting each sliding door and replacing the upper rail or front roller or removing the front roller from service if necessary. The actions of this AD are intended to address an unsafe condition on these products.
Notice of Permanent Closure
The Federal Aviation Administration received written notice from the Alaska Department of Transportation (AKDOT) advising that infrastructure associated with Haines, Alaska Seaplane Base (3Z9) is permanently closed.
Permanent Closure
The Federal Aviation Administration received written notice from the Alaska Department of Transportation (AKDOT) advising that infrastructure associated with Klawock, Alaska Seaplane Base (AQC) is permanently closed.
Airworthiness Directives; Airbus Helicopters
The FAA is superseding Airworthiness Directive (AD) 2020-19- 02, which applied to certain Airbus Helicopters (previously Eurocopter France) Model SA330J helicopters. AD 2020-19-02 required repetitively inspecting affected tail rotor (T/R) blades and depending on the inspection results, repairing or replacing the T/R blade. AD 2020-19-02 also prohibited installing an affected T/R blade unless it passed the inspections. This AD retains the requirements of AD 2020-19-02 and also clarifies the applicability, clarifies the affected T/R blades in the required actions, reduces a compliance time, and corrects the prohibition requirement. This AD was prompted by the determination that these corrections are necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Pilatus Aircraft Ltd. (Pilatus) Model PC-7 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a missing release bar retaining screw on a Harley-type buckle assembly installed on a harness shoulder strap. This condition, if not corrected, could lead to loss of pilot restraint and consequently loss of airplane control or injuries to the crew. The FAA is issuing this AD to address the unsafe condition on these products.
Notice of Opportunity for Public Comment on Surplus Property Land Swap and Release at the Jack Edwards National Airport, Gulf Shores, Alabama
Notice is being given that the FAA is considering a request from the Gulf Shores Airport Authority to release and exchange 5 acres of airport property, previously released for non- aeronautical use, for 5.75 acres of adjacent property to be used for non-aeronautical business development.
Notice of Intent To Rule on a Land Release Request at Malden Regional Airport & Industrial Park (MAW), Malden, MO
The FAA proposes to rule and invites public comment on the request to release and sell a 5.27 acre parcel of federally obligated airport property at the Malden Regional Airport & Industrial Park (MAW), Malden, Missouri, under the provisions of 49 U.S.C. 47107(h)(2).
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: FAA Aircraft Noise Complaint and Inquiry System (Noise Portal)
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The FAA Regional Administrators' Offices and the FAA Noise Ombudsman will use the information voluntarily reported, on the occasion of a complaint, by the public in the FAA Noise Portal to prepare responses to their noise complaints or inquiries. The required FAA Noise Portal fields represent the minimum amount of information the FAA needs to address the public's noise complaint or question and includes: name, email, address or cross street and a description of the noise complaint or inquiry. It is important to know the person's name and email address to respond and track the complaint. The FAA will not respond to the same complaint from the same person more than once. The address or cross street is needed for the FAA to determine potential sources of the aircraft noise issues as most people complain about aircraft in the vicinity of their residence. The description is used to provide additional details for the FAA to better address the complaint or question.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.