Federal Aviation Administration July 2015 – Federal Register Recent Federal Regulation Documents
Results 1 - 37 of 37
Organization; Institution Stockholder Voting Procedures
The Farm Credit Administration (FCA, we, Agency or our) amended our regulations to clarify and enhance Farm Credit System (Farm Credit or System) bank and association stockholder voting procedures for tabulating votes, the use of tellers committees, and other items as identified. In accordance with the law, the effective date of the rule is no earlier than 30 days from the date of publication in the Federal Register during which either or both Houses of Congress are in session.
Loans in Areas Having Special Flood Hazards
The Office of the Comptroller of the Currency (OCC), Board of Governors of the Federal Reserve System (Board), Federal Deposit Insurance Corporation (FDIC), the Farm Credit Administration (FCA), and the National Credit Union Administration (NCUA) (collectively, the Agencies) are amending their regulations regarding loans in areas having special flood hazards to implement certain provisions of the Homeowner Flood Insurance Affordability Act of 2014 (HFIAA), which amends some of the changes to the Flood Disaster Protection Act of 1973 mandated by the Biggert-Waters Flood Insurance Reform Act of 2012 (Biggert-Waters). Specifically, the final rule requires the escrow of flood insurance payments on residential improved real estate securing a loan, consistent with the changes set forth in HFIAA. The final rule also incorporates an exemption in HFIAA for certain detached structures from the mandatory flood insurance purchase requirement. Furthermore, the final rule implements the provisions of Biggert-Waters related to the force placement of flood insurance. Finally, the final rule integrates the OCC's flood insurance regulations for national banks and Federal savings associations. The Agencies plan to address the private flood insurance provisions in Biggert-Waters in a separate rulemaking.
Organization and Functions; Field Office Locations
The Farm Credit Administration (FCA, we, our or Agency) issues a final rule amending our regulation in order to change the address for a field office as a result of a recent office relocation.
Notice of Public Workshops for the Draft Re-Evaluation of the O'Hare Modernization Environmental Impact Statement
The Federal Aviation Administration (FAA) announces its intent to host Public Workshops for the Draft Written Re-Evaluation of the O'Hare Modernization Environmental Impact Statement (Draft Re- Evaluation) for Chicago O'Hare International Airport, Chicago, Illinois. The Draft Re-Evaluation will identify the potential environmental impacts associated with the construction schedule modification that alters the timing for commissioning new Runway 10R/28L, new Runway 9C/ 27C, and the extension of Runway 9R/27L at O'Hare International Airport pursuant to the National Environmental Policy Act. The FAA will host Public Workshops on the Draft Re-Evaluation. The Public Workshops on the Draft Re-Evaluation will be held on the following dates: Monday, August 10, 2015, at White Eagle Banquets, 6839 North Milwaukee Avenue, Niles, Illinois 60714; Tuesday, August 11, 2015, at Taft High School, 6530 West Bryn Mawr Avenue, Chicago, Illinois 60631; Wednesday, August 12, 2015, at Monty's Elegant Banquets, 703 South York Road, Bensenville, Illinois 60106; Thursday, August 13, 2015, at Belvedere Events and Banquets, 1170 West Devon Avenue, Elk Grove Village, Illinois 60007. Each Public Workshop will start at 1 p.m. (Central Standard Time), and registration to participate in the Public Workshops will conclude by 9 p.m. (Central Standard Time). Representatives of FAA and its consultants will be available to provide information about the Draft Re-Evaluation. Spanish language translators will be available at the Public Workshops. If you need the assistance of a translator, other than Spanish, please call Ms. Amy Hanson at (847) 294-7354 by August 3, 2015. The Draft Re-Evaluation will be available for review on line at (https://www.faa.gov/airports/airport_development/omp/eis_re-e val/) and at libraries around O'Hare International Airport. The FAA will issue a separate notice at the time the Draft Re-Evaluation is available.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for The Boeing Company Model 747 airplanes equipped with a main deck side cargo door (MDSCD). This AD was prompted by recent testing that indicates that intermodal containers, when loaded as cargo, under certain flight- load conditions, can shift and impact the adjacent fuselage frames. This AD requires revising the airplane flight manual (AFM) to incorporate limitations for carrying certain payloads. We are issuing this AD to prevent intermodal containers loaded in the offset method from shifting during flight gust loads and damaging fuselage frames, which could lead to the structural failure of the aft fuselage in flight and subsequent in-flight breakup of the airplane.
Petition for Exemption; Summary of Petition Received; Matthew Gerlitzki
This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Kaman Aerospace Corporation (Kaman) Helicopters
We are adopting a new airworthiness directive (AD) for Kaman Model K-1200 helicopters with certain main rotor blades (MRB) installed. This AD requires inspecting each MRB for a crack or damage. This AD was prompted by a report that a crack was found on an MRB during a tear-down inspection. The actions are intended to detect a crack in the MRB, which could lead to failure of the MRB and subsequent loss of control of the helicopter.
Sixth Meeting: Special Committee 231 (SC 231)
The FAA is issuing this notice to advise the public of the sixth meeting of the Special Committee 231.
Twenty-Third Meeting: Special Committee 214 (SC 214)
The FAA is issuing this notice to advise the public of the twenty-third meeting of the Special Committee 214.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Notice of Intent To Rule on Change in Use of Aeronautical Property at Louisville International Airport, Louisville, Kentucky
The Federal Aviation Administration (FAA) is requesting public comment on a request by the Louisville Regional Airport Authority of Louisville, Kentucky, owner of the Louisville International Airport, to change a portion of airport property from aeronautical to non- aeronautical use at the Louisville International Airport. The request consists of approximately 0.91 acres to the Commonwealth of Kentucky for use as right-of-way for the relocated portion of Grade Lane. This action is taken under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).
Special Conditions: Pratt and Whitney Canada, PW210A; Flat 30-Second and 2-Minute One Engine Inoperative Rating
These special conditions are issued for the Pratt and Whitney Canada PW210A engine model. This engine will have a novel or unusual design featurean additional one engine inoperative (OEI) rating that combines the 30-second and 2-minute OEI ratings into a single rating. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; Technify Motors GmbH Reciprocating Engines
We propose to adopt a new airworthiness directive (AD) for all Technify Motors GmbH TAE 125-02 reciprocating engines with a dual mass flywheel installed. This proposed AD was prompted by reports of a gearbox drive shaft breaking during starting or restarting of the engine. This proposed AD would require installation of a start phase monitoring system and associated specified software. We are proposing this AD to prevent overload and failure of the gearbox drive shaft, which could lead to failure of the engine, in-flight shutdown, and loss of control of the airplane.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A318, A319, and A321 series airplanes. This proposed AD was prompted by reports of in-flight loss of fixed and hinged main landing gear (MLG) fairings, and reports of post-modification MLG fixed fairing assemblies that have wear and corrosion. This proposed AD would require, for certain airplanes, repetitive replacements of the fixed fairing upper and lower attachment studs of both the right-hand (RH) and left-hand (LH) MLG; and repetitive inspections for corrosion, wear, fatigue, cracking, and loose studs of each forward stud assembly of the fixed fairing door upper and lower forward attachment of both RH and LH MLG; and replacement if necessary. This proposed AD also provides an optional terminating modification for the repetitive replacements of the fixed fairing upper and lower attachment studs. We are proposing this AD to prevent in-flight detachment of an MLG fixed fairing and consequent damage to the airplane.
Alaska: Fixed Wing Aircraft External Loads as a Restricted Category Special Purpose Flight Operation
This notice announces the availability of and request comments on the proposed authorization of Alaska Fixed Wing External Loads (FWEL) as a new restricted category special purpose operation, pursuant to Title 14 of the Code of Federal Regulations (14 CFR) 21.25(b)(7), for operations within the State of Alaska.
Emergency Locator Transmitters (ELTs)
This notice summarizes the inadequacies of hook and loop fasteners as a means for securing automatic fixed (AF) and automatic potable (AP) ELTs, and avoids placing an undue burden on aircraft owners while acknowledging the voluntary efforts of ELT manufacturers to improve designs.
Advisory Circular (AC) 20-159, Obtaining Design and Production Approval of Airport Moving Map Display Applications Intended for Electronic Flight Bag Systems
This notice announces the Federal Aviation Administration's (FAA) intent to cancel AC 20-159. This cancellation will result in no new approval of technical standard order authorizations (TSOA) for an ``incomplete system'' issued for Technical Standard Order (TSO) C-165, Electronic Map Display Equipment for Graphical Depiction of Aircraft Position. Therefore, the guidance contained in AC 20-159 allowing applicants to obtain a design and production approval using the software and database for an airport moving map display (AMMD) intended for use on a Class 2 electronic flight bag (EFB) for ground operations, will no longer be available. FAA AC 120-76C, Guidelines for the Certification, Airworthiness, and Operational Use of Electronic Flight Bags, dated May 9, 2014, replaces AC 20-159 and provides guidance for applicants seeking authorization to display an own-ship symbol limited to the airport surface as a Type B application for use on any EFB.
Airworthiness Directives; Bell Helicopter Textron Canada
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada (BHTC) Model 430 helicopters to require inspecting the tail rotor control tube assembly (control tube) and either repairing or replacing the control tube. This AD was prompted by two reports of failure of the control tube bonded clevis. The actions of this AD are intended to prevent failure of a control tube bonded clevis, which could lead to failure of the control tube and subsequent loss of helicopter control.
Airworthiness Directives; Bombardier, Inc. Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) airplanes, Model CL-600-2D15 (Regional Jet Series 705) airplanes, and Model CL-600-2D24 (Regional Jet Series 900) airplanes. This proposed AD was prompted by a report indicating that some operators have inadvertently removed the existing insulation blankets from the upper wing box area. This proposed AD would require inspecting for and replacing missing insulation blankets in the upper wing box area. We are proposing this AD to detect and replace missing insulation blankets from the upper wing box area, which could result in inadequate thermal protection to prevent fuel ignition in the event of an undetected bleed air leak due to a cracked or ruptured bleed-air duct.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by a report of loose bolts that are intended to secure the translating door crank assembly to the outside handle shaft. This AD requires a detailed inspection for loose bolts on the aft translating door crank assembly, and removal and reinstallation of the bolts. We are issuing this AD to prevent loose bolts from falling out. If both bolts become loose or fall out after the door is closed and locked, the door cannot be opened from inside or outside, which could impede evacuation in the event of an emergency.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc. Models PA-46-350P and PA-46-500TP airplanes. This AD requires installing cable ties around the cabin altitude encoder and the supporting structure, adding thread-locking compound to the threads of the existing single fastener; and repetitively inspecting the cable ties and the fastener to ensure security and proper condition. This AD was prompted by a report that a cabin altitude encoder came free from its mounting bracket, which interfered with motion of the elevator flight control. We are issuing this AD to correct the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Office of Commercial Space Transportation; Notice of Availability of the Final Environmental Assessment (Final EA), Finding of No Significant Impact (FONSI), and Record of Decision (ROD) for the Houston Spaceport, City of Houston, Harris County, Texas
In accordance with the National Environmental Policy Act of 1969, as amended (NEPA; 42 United States Code 4321 et seq.), Council on Environmental Quality NEPA implementing regulations (40 Code of Federal Regulations parts 1500 to 1508), and FAA Order 1050.1E, Change 1, Environmental Impacts: Policies and Procedures, the FAA is announcing the availability of the Final EA and FONSI/ROD for the Houston Spaceport.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 767 airplanes. This proposed AD was prompted by reports of cracking at a central part of the structure. This proposed AD would require repetitive inspections of the skin hidden by the upper and lower splice fittings on both sides of the fuselage, and corrective action if necessary. We are proposing this AD to detect and correct fatigue cracking of the hidden fuselage skin and cracking, corrosion, and other damage to the splice fittings and adjacent visible fuselage skin and structure that could lead to loss of a primary load path between the fuselage and the wing box, and consequent reduced structural integrity of the airplane.
Airworthiness Directives; Piaggio Aero Industries S.p.A Airplanes
We propose to adopt a new airworthiness directive (AD) for Piaggio Aero Industries S.p.A Model P-180 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the need to restore the safe fatigue life of the bulkhead structure. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; M7 Aerospace LLC Airplanes
We are superseding Airworthiness Directive (AD) 2011-17-07 for certain M7 Aerospace LLC (type certificate previously held by M7 Aerospace LP) Models SA226-T, SA226-T(B), SA226-TC, and SA226-AT airplanes. AD 2011-17-07 required repetitive replacement and inspection of certain elevator, rudder, aileron, and aileron-to-rudder interconnect primary control cables, and checking and setting of flight control cable tension. This AD requires repetitively inspecting and replacing the primary flight control rudder cables, repetitively replacing all other primary flight control and trim tab cables, and checking/setting the flight control cable tension. This AD was prompted by a report of extensive damage found on the left hand primary flight control rudder cable located under the cockpit floor on one of the airplanes affected by AD 2011-17-07. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A318-111 and -112 airplanes; Model A319-111, -112, and - 115 airplanes; Model A320-214 airplanes; and Model A321-111, -112, - 211, -212, and -213 airplanes. This proposed AD was prompted by reports of cracked cadmium-plated lock nuts that attach the hinge to the fan cowl door. This proposed AD would require inspecting to determine the serial number of each engine fan cowl door, inspecting for cracking of the hinge lock nuts of any affected door, and replacing the lock nuts if necessary. We are proposing this AD to detect and correct cracking of the hinge lock nuts, which could result in separation of the hinge from the fan cowl door, in-flight loss of the door, and consequent damage to the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-400 series airplanes, as modified by a certain supplemental type certificate. This proposed AD was prompted by the discovery of a design drawing error regarding placards that identified incorrect squibs and pressure switches for certain fire extinguisher bottles. This proposed AD would require a detailed inspection of certain cargo placards to determine if they are the correct placards and in the correct location, a detailed inspection of the harnesses to verify that they are marked and installed correctly, and corrective action if necessary. We are proposing this AD to detect and correct incorrectly installed harnesses for the cargo fire suppression system bottles, which could result in an incorrect activation sequence of the bottles, the inability to suppress a cargo fire quickly, and a possible uncontrollable fire.
Airworthiness Directives; The Boeing Company Airplanes
We propose to supersede Airworthiness Directive (AD) 2008-26- 07, which applies to all McDonnell Douglas Model DC-8-11, DC-8-12, DC- 8-21, DC-8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and DC-8-43 airplanes; Model DC-8-50 series airplanes; Model DC-8F-54 and DC-8F-55 airplanes; Model DC-8-60 series airplanes; Model DC-8-60F series airplanes; Model DC-8-70 series airplanes; and Model DC-8-70F series airplanes. AD 2008-26-07 currently requires repetitive inspections of the lower skin and stringers at certain stations, and corrective actions if necessary. This proposed AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. This proposed AD would also require an eddy current high frequency (ETHF) inspection for cracks of the fastener open holes common to the lower skins, stringers, and splice fittings at a certain station; installation of external doublers and fasteners and repetitive eddy current low frequency (ETLF) inspections around the fasteners for any crack; and corrective actions if necessary. We are proposing this AD to detect and correct cracks in the lower skins, stringers, and fastener holes of the splice fittings, which could result in the loss of structural integrity of the airplane.
Designation of Oceanic Airspace
By this action the FAA informs airspace users of the type of air traffic control (ATC) service provided in the oceanic airspace controlled by the United States of America (U.S.). This notice is consistent with U.S. obligations under the Convention on International Civil Aviation (Chicago Convention), including, that all Contracting States disseminate information regarding the types of ATC services provided in oceanic airspace under their control.
Sixty-Sixth Meeting: Special Committee 135 (SC 135)
The FAA is issuing this notice to advise the public of the sixty-sixth meeting of the Special Committee 135.
Sixth Meeting: Special Committee 231 (SC 231)
The FAA is issuing this notice to advise the public of the sixth meeting of the Special Committee 231.
Fifth Meeting: Special Committee 229 (SC 229)
The FAA is issuing this notice to advise the public of the fifth meeting of the Special Committee 229.
Notice of Intent To Rule on Change in Use of Aeronautical Property at Sumner County Regional Airport, Gallatin, Tennessee
The Federal Aviation Administration (FAA) is requesting public comment on a request by the Sumner County Regional Airport Authority of Gallatin, Tennessee, owner of the Sumner County Regional Airport, to change a portion of airport property from aeronautical to non- aeronautical use at the Sumner County Regional Airport. The request consists of approximately 14.29 acres to the City of Gallatin, Tennessee for construction of Airport Road. This action is taken under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).
Notice of Release From Federal Grant Assurance Obligations for Elko Regional Airport (EKO), Elko, Nevada
The Federal Aviation Administration (FAA) proposes to rule and invites public comment on the application for a release of approximately 5,037 square feet of airport property at the Elko Municipal Airport (Airport), City of Elko, Nevada. The City of Elko proposes to release the airport land in order to acquire an equal 5,037 square feet parcel of privately-owned land. The land exchange was proposed after a 2011 deed survey disclosed that the airport perimeter fence encroached into private property abutting the airport. Relocation of the fence is not practical due to the cost associated with moving the fence and underground utilities. The parties concluded that the encroachment problem could be resolved with an equitable land exchange. Since the release land is not needed for airport purposes, the exchange will not negatively impact the airport or civil aviation.
Notice of Intent To Rule on Request for a Temporary Change in Use To Accommodate Vehicular Parking on a Section of the Active Aircraft Parking Apron, at Albany International Airport, Albany, NY
The FAA proposes to rule and invite public comment for a temporary change in use not to exceed 5 years to accommodate vehicular parking on a section of the aircraft parking apron to the immediate west of the terminal building, at Albany International Airport, Albany, NY.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.