Federal Aviation Administration 2019 – Federal Register Recent Federal Regulation Documents
Results 551 - 600 of 1,142
Removal of Jet Route J-147; Eastern United States
This action removes jet route J-147 which currently extends between Beckley, WV, and Casanova, VA. This action is necessary due to the planned decommissioning of the Greenbrier, WV, VOR/DME navigation aid which provides navigation guidance for segments of the route. The Greenbrier VOR/DME is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Amendment of Multiple Air Traffic Service (ATS) Routes in the Vicinity of Omaha, NE
The FAA is amending three jet routes and seven VHF Omnidirectional Range (VOR) Federal airways in the vicinity of Omaha, Nebraska, to correct the state abbreviation for the Omaha VOR/Tactical Air Navigation (VORTAC) navigation aid (NAVAID). The Omaha VORTAC is located in Mineola, Iowa; however, the state abbreviation for the location of the Omaha VORTAC included in the Air Traffic Service (ATS) routes is listed as ``NE''. Specifically, this action changes the state abbreviation for the Omaha VORTAC listed in the jet route J-21, J-41, and J-151, and VOR Federal airway V-6, V-8, V-138, V-159, V-172, V-181, and V-307, descriptions from ``NE'' to ``IA'' to match the information contained in the FAA's aeronautical database and the charted ATS route depictions on the associated charts. No air traffic services are affected by this action.
Amendment of Air Traffic Service (ATS) Route T-331; Western United States
This action modifies Area Navigation (RNAV) Route T-331 in the western United States. The modification is necessary due to the planned decommissioning of the Clovis, CA, VOR portion of the VOR/Tactical Air Navigation (VORTAC) navigation aid (NAVAID), which provides navigation guidance for portions of affected ATS route V-23. The decommissioning has rendered portions of V-23 unusable and amending T-331 helps overcome affected portions of V-23. The Clovis, CA, VOR is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Establishment of Class E Airspace, Boulder City, NV
This action establishes Class E airspace extending upward from 700 feet above the surface at Boulder City Muni Airport, NV. This action supports the development of Instrument Flight Rules (IFR) operations under standard instrument approach and departure procedures at the airport, for the safety and management of aircraft within the National Airspace System.
Proposed Amendment of Air Traffic Service (ATS) Routes in the Vicinity of Ithaca, NY
This action proposes to amend VHF Omnidirectional Range (VOR) Federal airways V-423, and V-428 due to the planned decommissioning of the Ithaca, NY, VOR/DME navigation aid which provides navigation guidance for segments of the routes. The Ithaca VOR/DME is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Proposed Amendment and Revocation of Air Traffic Service (ATS) Routes in the Vicinity of Berlin, NH
This action proposes to remove VHF Omnidirectional Range (VOR) Federal airway V-104, and modify V-322, due to the planned decommissioning of the Berlin, NH, VOR/DME navigation aid which provides navigation guidance for segments of the routes. The Berlin VOR/DME is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Proposed Amendment of Air Traffic Service (ATS) Routes in the Vicinity of Glens Falls, NY
This action proposes to amend VHF Omnidirectional Range (VOR) Federal airways V-91, V-123, V-431, V-489, and V-496 due to the planned decommissioning of the Glens Falls, NY, VORTAC navigation aid which provides navigation guidance for segments of the routes. The Glens Falls VORTAC is being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Proposed Amendment of VOR Federal Airway V-37 Due to the Planned Decommissioning of Aylmer, Canada, VHF Omnidirectional Range (VOR) Navigation Aid
This action proposes to amend VHF Omnidirectional Range (VOR) Federal airway V-37 in the northeast United States to reflect changes being made in Canadian airspace. The modification is necessary due to the planned decommissioning of the Aylmer, Canada, VOR navigation aid (NAVAID), which provides navigation guidance for portions of V-37. The Aylmer VOR is being decommissioned as part of NAV CANADA's NAVAID Modernization Program.
Proposed Amendment of VOR Federal Airways V-148, V-177, and V-345 in the Vicinity of Ely, MN, and Hayward, WI
This action proposes to amend VHF Omnidirectional Range (VOR) Federal airways V-148 and V-345 in the vicinity of Hayward, WI, and remove V-177 in the vicinity of Ely, MN, and Hayward, WI. The VOR Federal airways modifications and removal are necessary due to the planned decommissioning of the Ely, MN, and Hayward, WI, VOR navigation aids (NAVAIDs), which provide navigation guidance for portions of the affected air traffic service (ATS) routes. The Ely and Hayward VORs are being decommissioned as part of the FAA's VOR Minimum Operational Network (MON) program.
Proposed Revocation of VHF Omnidirectional Range (VOR) Federal Airway V-369 Due to the Decommissioning of the Groesbeck, TX, VOR
This action proposes to remove VHF Omnidirectional Range (VOR) Federal airway V-369 in its entirety between Navasota, TX, and Dallas- Fort Worth, TX. The FAA is proposing this action due to the planned decommissioning of the Groesbeck, TX (GNL), VOR navigation aid (NAVAID) which provides navigation guidance for portions of the affected ATS routes. The Groesbeck VOR is being decommissioned in support of the FAA's VOR Minimum Operational Network (MON) program.
Expansion of R-3803 Restricted Area Complex; Fort Polk, LA
This action expands the R-3803 restricted area complex in central Louisiana by establishing four new restricted areas, R-3803C, R-3803D, R-3803E, and R-3803F, and makes minor technical amendments to the existing R-3803A and R-3803B legal descriptions for improved operational efficiency and administrative standardization. The restricted area establishments and amendments support U.S. Army Joint Readiness Training Center training requirements at Fort Polk for military units preparing for overseas deployment.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 and 787-9 airplanes. This proposed AD was prompted by a report that a passenger entry door assist handle became detached during use. This proposed AD would require a detailed inspection of all passenger and service entry door assist handles for correct installation and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Notice of Availability of the Final Re-Evaluation of the O'Hare Modernization Environmental Impact Statement for the Proposed Interim Fly Quiet (Final Re-Evaluation)
The Federal Aviation Administration (FAA) announces that the Final Written Re-Evaluation of the O'Hare Modernization Environmental Impact Statement for the Proposed Interim Fly Quiet (Final Re- Evaluation) for Chicago O'Hare International Airport, Chicago, Illinois is available. The Final Re-Evaluation analyzes and discloses the potential environmental impacts associated with the Proposed Interim Fly Quiet at O'Hare International Airport pursuant to the National Environmental Policy Act.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400 and 747-400F series airplanes. This proposed AD was prompted by an evaluation that determined fatigue cracks could develop in the underwing longerons. This proposed AD would require repetitive inspections of the underwing longerons and certain fuselage skins for any crack, and applicable on- condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Proposed Amendment of Class E Airspace; Mount Pleasant, IA
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Mount Pleasant Municipal Airport, Mount Pleasant, IA. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Mount Pleasant non-directional beacon (NDB), which provided navigation information for the instrument procedures at this airport. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Proposed Amendment of Class E Airspace; Fairmont, MN
This action proposes to amend the Class E surface airspace and Class E airspace extending upward from 700 feet above the surface at Fairmont Municipal Airport, Fairmont, MN. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Fairmont VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The geographic coordinates of the Fairmont Municipal Airport would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Proposed Amendment of Class E Airspace; Mattoon/Charleston, IL; and Revocation of Class E Airspace; Monticello, IL
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Coles County Memorial Airport, Mattoon/Charleston, IL, and remove the Class E airspace extending upward from 700 feet above the surface at Piatt County Airport, Monticello, IL. The FAA is proposing this action as the result of an airspace review caused by the decommissioning of the Mattoon VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at these airports, as part of the VOR Minimum Operational Network (MON) Program; and the closure of the Piatt County Airport. The geographic coordinates of and the city associated with the Coles County Memorial Airport would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at the Coles County Memorial Airport.
Proposed Amendment of the Class E Airspace and Establishment of Class E Airspace; Huntsville, AL
This action proposes to amend the Class E surface airspace and the Class E airspace extending upward from 700 feet above the surface and establish a Class E airspace area designated as an extension to a Class C surface area at Huntsville International-Carl T. Jones Field, Huntsville, AL. The FAA is proposing this action as the result of the decommissioning of the Decatur VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The names of Huntsville International-Carl T. Jones Field, Redstone AAF, Pryor Field Regional Airport, and Huntsville Executive Tom Sharp Jr. Field and the geographic coordinates of Huntsville International-Carl T. Jones Field, Pryor Field Regional Airport, and Huntsville Executive Tom Sharp Jr. Field would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at this airport.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2009-09-02, which applies to certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2009-09-02 requires repetitive inspections for damage of certain main landing gear (MLG) forward stabilizer brace assemblies, repetitive inspections for cracking of both MLG forward stabilizer braces, liquid penetrant inspections for cracking, and corrective actions if necessary. Since the FAA issued AD 2009-09-02, the FAA has determined that the installation of an elbow restrictor is necessary to address the unsafe condition which would extend the repetitive inspection interval. This proposed AD would retain the existing actions and also require installation of an elbow restrictor. The FAA is proposing this AD to address the unsafe condition on these products.
Special Conditions: TTF Aerospace, LLC, Airbus Model A330-300 and Model A330-900 Series Airplanes; Bulk Cargo Lower Deck Crew Rest Compartments
These special conditions are issued for the Airbus Model A330- 300 and Model A330-900 series airplanes. These airplanes, as modified by TTF Aerospace, LLC (TTF Aerospace), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is a lower deck mobile crew rest (LD-MCR) compartment installed in the aft cargo compartment of Model A330–300 and Model A330-900 series airplanes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Petition for Exemption; Summary of Petition Received; L. Salcedo
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Saab AB, Saab Aeronautics (Formerly Known as Saab AB, Saab Aerosystems) Airplanes
We are adopting a new airworthiness directive (AD) for all Saab AB, Saab Aeronautics Model SAAB 2000 airplanes. This AD was prompted by an event where the airplane did not respond to the flightcrew's flight control inputs because the pitch trim switches did not disconnect the autopilot. This AD requires modifying the wiring installation for the autopilot disconnect logic. We are issuing this AD to address the unsafe condition on these products.
Notice of Request To Release Airport Property for Land Disposal
The FAA proposes to rule and invites public comment on the release of land at the Oskaloosa Municipal Airport, Oskaloosa, Iowa.
Proposed Amendment of the Class E Airspace; Haleyville, AL, and Hamilton, AL
This action proposes to amend the Class E airspace extending upward from 700 feet above the surface at Posey Field Airport, Haleyville, AL, and Marion County-Rankin Fite Airport, Hamilton, AL. The FAA is proposing this action as the result of the decommissioning of the Hamilton VHF omnidirectional range (VOR) navigation aid, which provided navigation information for the instrument procedures at this airport, as part of the VOR Minimum Operational Network (MON) Program. The name and geographic coordinates of Marion County-Rankin Fite Airport would also be updated to coincide with the FAA's aeronautical database. Airspace redesign is necessary for the safety and management of instrument flight rules (IFR) operations at these airports.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Application for Employment With the Federal Aviation Administration Correction
This notice is a Correction to the notice published on May 14, 2019, due to invalid Form Number and omission of the website's URL. In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection involves an automated application process for employment with the Federal Aviation Administration by way of the Office of Personnel Management's (OPM) USAJOBS website: www.usajobs.gov. The Applicants begin the application process by building an account on USAJOBS website and; thereafter, they are passed into the FAA Automated Vacancy Information Access Tool for Online Referral (AVIATOR) to answer specific questions related to FAA job vacancy of interest. This pass through is a direct USAJOBS interface with AVIATOR and; hence, there is no standalone link to be used by the applicants. The information collected is necessary to determine basic eligibility for employment and potential eligibility for Veteran's Preference, Veteran's Readjustment Act, and People with Disability appointments. In addition, there are specific occupation questions that assist the FAA Office of Human Resource Management (AHR) in determining candidates' qualifications in order that the best-qualified candidates are hired for the many FAA occupations.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 727 airplanes, Model 757 airplanes, and Model 767-200, -300, -300F, and -400ER series airplanes. This proposed AD was prompted by reports of nuisance stick shaker activation while the airplane accelerated to cruise speed at the top of climb. This proposed AD was also prompted by an investigation of those reports that revealed that the angle of attack (AOA) (also known as angle of airflow) sensor vanes could not prevent the build-up of ice, causing the AOA sensor vanes to become immobilized, which resulted in nuisance stick shaker activation. This proposed AD would require a general visual inspection of the AOA sensors for a part number, and replacement of affected AOA sensors. We are proposing this AD to address the unsafe condition on these products.
Notice of Availability of the Finding of No Significant Impact/Record of Decision and Adoption of the United States Air Force Supplemental Environmental Analysis for the Establishment of the Playas Temporary Military Operating Area
The Federal Aviation Administration (FAA) announces its decision to adopt the United States Air Force (USAF) Playas Military Operating Area and Red Flag Rescue Supplemental Environmental Analysis (SEA) for the establishment of a Temporary Military Operating Area (TMOA) in Playas, New Mexico. This notice announces that based on its independent review and evaluation of the SEA and supporting documentation, the FAA is adopting the SEA and issuing a Finding of No Significant Impact (FONSI)/Record of Decision (ROD) for the establishment of the Playas TMOA.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A330-200, -200F, and -300 series airplanes. This proposed AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2011-18-15, which applies to certain Bombardier, Inc., Model DHC-8-400 series airplanes. AD 2011-18-15 requires initial and repetitive torque checks of the bolt preload; detailed inspection of the barrel nuts and cradle for cracking, pitting, and corrosion if the bolt preload is correct; and replacement of hardware if necessary. Since the FAA issued AD 2011-18-15, the agency has determined that incorporation of a new design change is necessary to address the root cause of the failure of the barrel nuts. This proposed AD would retain the existing requirements and add new inspections and replacement of certain hardware, which would terminate the repetitive torque checks and inspections. This AD also removes airplanes from the applicability. The FAA is proposing this AD to address the unsafe condition on these products.
Notice of Availability of the Finding of No Significant Impact/Record of Decision and Adoption of the United States Marine Corps Supplemental Environmental Analysis for the Establishment of the Playas Temporary Military Operating Area
The Federal Aviation Administration (FAA) announces its decision to adopt the United States Marine Corps (USMC) Supplemental Environmental Analysis for Temporary Activation of Playas Military Operations Area (SEA) for the establishment of a Temporary Military Operating Area (TMOA) in Playas, New Mexico. This notice announces that based on its independent review and evaluation of the SEA and supporting documents, the FAA is adopting the SEA and issuing a Finding of No Significant Impact (FONSI)/Record of Decision (ROD) for the establishment of the Playas TMOA.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-2D15 (Regional Jet Series 705), CL-600-2D24 (Regional Jet Series 900), and CL-600-2E25 (Regional Jet Series 1000) airplanes. This AD was prompted by reports that certain aft fuselage fittings are susceptible to cracking because they were not manufactured correctly. This AD requires replacement of those fittings with correctly manufactured parts, an eddy current inspection of certain fastener holes for cracking, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-700-1A10 and BD-700-1A11 airplanes. This AD was prompted by reports of low clearance between the variable frequency generator (VFG) power feeder cables and adjacent hydraulic lines and/or fuel lines in the aft equipment bay, which could cause chafing damage. This AD requires modifying the routing of the VFG power feeder cables and harnesses in the aft equipment bay. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This AD was prompted by a report that the capability of the diagonal struts fitted at a certain frame is below the expected design specifications. This AD requires replacing the original diagonal struts at a certain frame with new, improved parts, as specified in an European Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-102, -103, and -106 airplanes; Model DHC-8-200 series airplanes; and Model DHC-8-300 series airplanes. This AD was prompted by the reported loss of an elevator spring tab balance weight prior to takeoff. This AD requires inspecting the two balance weights and the two hinge arms on each elevator spring tab, and corrective actions if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rockwell Collins, Inc. Flight Display System Application
The FAA is adopting a new airworthiness directive (AD) for certain part-numbered Rockwell Collins, Inc. (Rockwell Collins) FDSA- 6500 flight display system applications installed on airplanes. This AD imposes operating limitations on the traffic collision avoidance system (TCAS) by revising the Limitations section of the airplane flight manual (AFM) or AFM supplement (AFMS) and installing a placard on each aircraft primary flight display. This AD was prompted by a conflict between the TCAS display indications and aural alerts that may occur during a resolution advisory (RA) scenario. The FAA is issuing this AD to require actions that address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus SAS Model A320-251N and -271N airplanes, and Model A321- 251N, -253N, -271N, and -272N airplanes. This proposed AD was prompted by reports that the regulated bleed temperature was measured above the design target with a temperature regulation shift phenomenon, and investigation results show that incorrect temperature regulation can degrade pneumatic system components located downstream of the pre- cooler. This proposed AD would require uploading improved bleed monitoring computer (BMC) software (SW), as specified in a European Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by a report of a fuel leak resulting from a crack on the left in-spar upper wing skin. This proposed AD would require repetitive surface high frequency eddy current (HFEC) inspections of the left and right upper wing skin, and repetitive general visual inspections of the upper wing skin in the adjacent rib bay areas for any crack, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2017-12-07, which applies to certain The Boeing Company Model 737-800, -900, and -900ER series airplanes. AD 2017-12-07 requires replacing the affected left temperature control valve and control cabin trim air modulating valve. Since the FAA issued AD 2017-12-07, the agency determined that the affected parts may be installed on airplanes outside the original applicability of AD 2017-12-07. This proposed AD would retain the requirements of AD 2017-12-07, expand the applicability to include those other airplanes, and add a new requirement for certain airplanes to identify and replace the affected parts. The FAA is proposing this AD to address the unsafe condition on these products.
Commercial Space Transportation Advisory Committee-Charter Renewal
FAA announces the renewal of the COMSTAC charter, a Federal Advisory Committee that provides information, advice, and recommendations to DOT and the FAA on the critical matters facing the U.S. commercial space transportation industry. This renewal will take effect the day of publication of this announcement, and will expire after 2 years.
Airworthiness Directives; Robinson Helicopter Company Helicopters
The FAA is adopting a new airworthiness directive (AD) for Robinson Helicopter Company (Robinson) Model R44 II helicopters. This AD requires inspecting the engine air induction hose (hose) and replacing any hose that is not airworthy. This AD was prompted by multiple reports of separation between the outer and inner layers of the hoses. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pilatus Aircraft Ltd. Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for Pilatus Aircraft Ltd. Models PC-6, PC-6/350, PC-6/350-H1, PC-6/350- H2, PC-6/A, PC-6/A-H1, PC-6/A-H2, PC-6/B-H2, PC-6/B1-H2, PC-6/B2-H2, PC-6/B2-H4, PC-6/C-H2, PC-6/C1-H2, PC-6-H1, and PC-6-H2 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as rudder shaft assemblies with incorrect rivet configuration. The FAA is proposing this AD to require actions that address the unsafe condition on these products.
Airworthiness Directives; Embraer S.A. Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 2017-16-08, which applies to certain Embraer S.A. Model ERJ 190-100 STD, -100 LR, -100 IGW, and -100 ECJ airplanes; and Model ERJ 190-200 STD, -200 LR, and -200 IGW airplanes. AD 2017-16-08 requires revising the existing maintenance or inspection program, as applicable, to incorporate more restrictive airworthiness limitations. Since the FAA issued AD 2017-16-08, the FAA determined that new or more restrictive airworthiness limitations are necessary. This proposed AD would require revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This proposed AD would also add airplanes to the applicability. The FAA is proposing this AD to address the unsafe condition on these products.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, addingnew obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: B4UFLY Smartphone App; Correction
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 14, 2019. The collection involves the B4UFLY smartphone app that provides situational awareness of flight restrictionsincluding locations of airports, restricted airspace, special use airspace, and temporary flight restrictionsbased on a user's current or planned flight location. In order to maintain NAS safety in proximity to airports, authorization is now required from recreational Unmanned Aircraft System (UAS) pilots to operate in controlled airspace The data collected will assist the FAA with determining the best processes to authorize recreational UAS pilots and inform air traffic control personnel of a UAS pilot's intended flight in order to assess whether the UAS may disrupt or endanger manned air traffic. Issuing a corrected 30-day notice to provide a full 30 days for comment.
Airworthiness Directives; Bombardier, Inc., Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Bombardier, Inc., Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) airplanes. This AD was prompted by a determination that new and more restrictive airworthiness limitations are necessary for operational checks of the landing gear alternate extension system (AES). This AD requires revising the existing maintenance or inspection program, as applicable, to incorporate new and more restrictive airworthiness limitations. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is superseding Airworthiness Directive (AD) 2018-19- 18, which applied to certain Airbus SAS Model A300 B4-603, B4-620, and B4-622 airplanes; Model A300 B4-600R series airplanes; Model A300 C4- 605R Variant F airplanes; and Model A300 F4-605R airplanes. AD 2018-19- 18 required, depending on airplane configuration, a modification of certain angle fitting attachment holes; repetitive inspections for cracking of certain holes of the internal lower angle fitting web, certain holes of the internal lower angle fitting horizontal splicing, the aft bottom panel, and a certain junction area; and related investigative and corrective actions if necessary. This new AD retains those actions, expands the applicability, and, for certain airplanes, requires repetitive inspections for cracking of certain holes of the center wing box (CWB) lower angle fittings and the CWB lower panel, and corrective actions if necessary, as specified in an European Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by reports of cracking of a certain frame (FR) angle fitting. The FAA is issuing this AD to address the unsafe condition on these products.
Statement of Policy on Performance Requirements for Operators of Aircraft That are Equipped With Automatic Dependent Surveillance-Broadcast (ADS-B) Out
This action announces the FAA's policy on performance requirements for certain operations of aircraft with Automatic Dependent Surveillance-Broadcast (ADS-B) Out equipment in ADS-B airspace after January 1, 2020. Under the circumstances identified in this policy, the FAA is providing assurance to operators that it will not consider degradation in Global Positioning System performance due to conditions outside the operator's control that results in an operation falling below ADS-B rule requirements to constitute non- compliance, provided the operator has exercised appropriate due diligence prior to conducting an operation.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.