Federal Aviation Administration 2016 – Federal Register Recent Federal Regulation Documents

This action establishes Class E airspace at Willapa Harbor Heliport, South Bend, WA, to accommodate new standard instrument approach and departure procedures developed at the heliport. Controlled airspace is necessary for the safety and management of Instrument Flight Rules (IFR) operations at the heliport.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 767-200 and -300 series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the aft pressure bulkhead web to pressure chord joint is subject to widespread fatigue damage (WFD). This proposed AD would require repetitive high frequency eddy current (HFEC) inspections of the aft pressure bulkhead web, at fasteners common to the bulkhead web and pressure chord, around the entire circumference of the pressure chord for any crack, and repair of cracks. We are proposing this AD to detect and correct cracks in the aft pressure bulkhead web. Such cracking could result in the loss of structural integrity of the airplane.

We are revising an earlier proposed airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747- 400F, 747SR, and 747SP series airplanes. The notice of proposed rulemaking (NPRM) proposed to require replacing the wire bundles inside the electrical conduit of the forward and aft boost pumps of the numbers 1 and 4 main fuel tanks with new, improved wire bundles inserted into conduit liners. The NPRM was prompted by several reports of chafing of the wire bundles inside the electrical conduit of the forward and aft boost pumps of the numbers 1 and 4 main fuel tanks due to high vibration. These wire bundles can chafe through the wire sleeving into the insulation, exposing the wire conductors. This action revises the NPRM by adding a revision to the maintenance or inspection program, as applicable, to include critical design configuration control limitations (CDCCL) for the fuel boost pump wiring. We are proposing this SNPRM to prevent chafing of the wire bundles and subsequent arcing between the wiring and the electrical conduit creating an ignition source in the fuel tanks, which could result in a fire and consequent fuel tank explosion. Since these actions impose an additional burden over that proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.

This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Taos Regional Airport, Taos, NM. Decommissioning of non-directional radio beacon (NDB) and cancellation of the NDB approaches due to advances in Global Positioning System (GPS) capabilities have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at Taos Regional Airport.

This action proposes to modify Alaskan VOR Federal airway V- 506 by lowering the floor of class E controlled airspace due to the establishment of a lower global navigation satellite system (GNSS) minimum enroute altitude (MEA). This action would allow maximum use of the airspace.

We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This proposed AD was prompted by reports of partial loss of no-back brake (NBB) efficiency on the trimmable horizontal stabilizer actuator (THSA). This proposed AD would require an inspection to determine THSA part number, serial numbers, and flight cycles on certain THSAs; and repetitive replacement for certain THSAs. We are proposing this AD to prevent loss of THSA NBB efficiency, which in conjunction with the power gear not able to keep the ball screw in its last commanded position, could lead to an uncommanded movement of the horizontal stabilizer, possibly resulting in loss of control of the airplane.

The Federal Aviation Administration (FAA) and the National Park Service (NPS), in accordance with the National Parks Air Tour Management Act of 2000, announce the next meeting of the National Parks Overflights Advisory Group (NPOAG) Aviation Rulemaking Committee (ARC). This notification provides the date, location, and agenda for the meeting. Date and Location: The NPOAG ARC will meet on April 13, 2016. The meeting will take place in Biscayne National Park's Dante Fascell Visitor Center Auditorium, 9700 SW. 328th Street, Homestead, FL 33033. The meeting will be held from 8:30 a.m. to 4:30 p.m. on April 13, 2016. This NPOAG meeting will be open to the public.

This action corrects the FAA docket number of a final rule published in the Federal Register on January 14, 2016, amending the legal description of RNAV Route Q-35 in the Western United States. In that rule, the FAA docket number was incorrectly published as FAA-2013- 6001, instead of FAA-2015-6001.

We are superseding Airworthiness Directive (AD) 2014-07-52 for certain Airbus Helicopters (previously Eurocopter France) Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, AS350D, AS350D1, AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. AD 2014-07- 52 required repetitively inspecting certain reinforcement angles of the rear structure to tailboom junction frame (reinforcement angles) for a crack at 10 hour time-in-service (TIS) intervals, repairing any cracked reinforcement angle, and allowed an optional repetitive inspection with a 165 hour TIS inspection interval as a terminating action for the 10 hour TIS inspections. This AD retains the inspection requirements of AD 2014-07-52 and requires the inspection of the area around each reinforcement angle screw hole as terminating action to the 10 hour TIS inspections. We are issuing this AD to detect a crack in the reinforcement angle, which if not corrected, could result in loss of the tailboom and subsequent loss of control of the helicopter.

We propose to adopt a new airworthiness directive (AD) for EVECTOR, spol. s.r.o. Model L 13 SEH VIVAT and L 13 SDM VIVAT gliders (type certificate previously held by AEROTECHNIK s.r.o.). This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as lack of distinct color marking of the elevator drive. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for EVECTOR, spol. s.r.o. Models L 13 SEH VIVAT and L 13 SDM VIVAT gliders (type certificate previously held by AEROTECHNIK s.r.o.) that would supersede AD 2000-20-12. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as insufficient material strength of the tail-fuselage attachment fitting. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

This action amends Class E airspace by updating the geographic coordinates at Harvey Municipal Airport, Harvey, ND; and Rolla Municipal Airport, Rolla, ND. The coordinates for Minot AFB and the Devils Lake VHF Omnidirectional Range/Distance Measuring Equipment (VOR/DME) are also updated to coincide with the FAA's database.

The FAA proposes to rule and invite public comment on the release of land at the Gainesville Municipal Airport under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).

The Federal Aviation Administration (FAA) is considering a proposal to change a portion of the airport from aeronautical use to nonaeronautical use and to authorize the conversion of the airport property. The proposal consists of one parcel of land containing a total of approximately 2.583. The property was acquired using City and FAA funds through the AIP Program from 1983-1987. The land comprising this parcel is outside the forecasted need for aviation development and, thus, is no longer needed for indirect or direct aeronautical use. The airport wishes to develop this land for compatible commercial, nonaeronautical use. The income from the conversion of this parcel will benefit the aviation community by reinvestment in the airport. Approval does not constitute a commitment by the FAA to financially assist in the conversion of the subject airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition of proceeds from the conversion of the airport property will be in accordance with FAA's Policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999. In accordance with Section 47107(h) of Title 49, United States Code, this notice is required to be published in the Federal Register 30 days before modifying the land-use assurance that requires the property to be used for an aeronautical purpose.

We propose to adopt a new airworthiness directive (AD) for all Viking Air Limited Models DHC-2 Mk. I, DHC-2 Mk. II, and DHC-2 Mk. III airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as corrosion of the elevator control rod and of the elevator actuating lever on the control column. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

This action proposes to establish Class D airspace at Destin, FL, providing the controlled airspace required for the Air Traffic Control Tower at Destin Executive Airport, (formerly Destin-Fort Walton Beach Airport). Additionally, this action would remove Eglin AF Aux No 3 Duke Field from the Class D designation, and establish Duke Field, Eglin AFB, FL in its place. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would amend existing Class D and Class E airspace by recognizing the airport's name change. This action also would change the existing Class D airspace designation at Duke Field, Eglin Air Force Base (AFB), FL, and would adjust the geographic coordinates of Eglin AFB, Destin Executive Airport, Duke Field, and Hurlburt Field, to stay in concert with the FAA's database.

This action amends a final rule published in the Federal Register of February 4, 2016, amending Class E surface area airspace and Class E airspace designated as an extension at Minot International Airport, Minot, ND. Adjustment of the geographic coordinates of Minot International Airport and Minot AFB in Class D airspace, and Minot International Airport, Minot Very High Frequency Omnidirectional Range Tactical Air Navigation (VORTAC), and Minot AFB, in Class E airspace extending upward from 700 feet above the surface, are added to the rule. The Title is also amended to include Class D airspace. This does not change the boundaries or operating requirements of the airspace.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew a previously approved information collection. Aircraft registration is necessary to ensure personal accountability among all users of the national airspace system. Aircraft registration also allows the FAA and law enforcement agencies to address non-compliance by providing the means by which to identify an aircraft's owner and operator.

We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and all Airbus Model A340-200, -300, -500, and -600 series airplanes. This proposed AD was prompted by reports of chafing of the feeder cable at the pylon-wing junction due to vibration; one report revealed that the cable loom plastic support bracket of the G-route was broken due to vibration; and another report revealed wire chafing due to clamp damage. This proposed AD would require modifying the cable loom support bracket of the G-route of the inboard pylons at the pylon- wing junction. We are proposing this AD to prevent chafing of the wiring in the pylon-wing area, which could result in an electrical short circuit near a flammable fluid vapor zone, and consequent fire or fuel tank explosion.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, 747-400D, and 747-400F series airplanes. This proposed AD was prompted by a determination that a certain fastener type in the fuel tank walls has insufficient bond to the structure, and an electrical wiring short could cause arcing to occur at the ends of fasteners in the fuel tanks. This proposed AD would require the installation of new clamps and polytetrafluoroethylene (TFE) sleeves on the wire bundles of the front spars and rear spars of the wings. This proposed AD would also require inspecting the existing TFE sleeves under the wire bundle clamps for correct installation, and replacement if necessary. We are proposing this AD to prevent potential ignition sources in the fuel tank in the event of a lightning strike or high-powered short circuit, and consequent fire or explosion.

We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A330-200 Freighter series airplanes; Model A330- 200 and A330-300 series airplanes; Model A340-200 and A340-300 series airplanes; Model A340-500 series airplanes; and Model A340-600 series airplanes. This proposed AD was prompted by a report indicating that, during an operational test of a ram air turbine (RAT), the RAT did not deploy in automatic mode. This proposed AD would require identification of the manufacturer, part number, and serial number of the RAT, and re- identifying and modifying the RAT if necessary. We are proposing this AD to prevent non-deployment of the RAT, which, if preceded by a total engine flame-out, or during a total loss of normal electrical power generation, could result in reduced control of the airplane.

This action proposes to modify the Class E airspace extending upward from the surface designated as an extension to the Class D surface area at Ogden-Hinckley Airport, Ogden, UT. The FAA's Aeronautical Information Services identified that the width of the Class E extension to the Class D surface area did not meet the current criteria. This action would enhance the safety and management of Standard Instrument Approach Procedures (SIAPs) for Instrument Flight Rules (IFR) operations at the airport.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes, Model 757 airplanes, Model 767 airplanes, and Model 777 airplanes. This AD results from fuel system reviews conducted by the manufacturer. This AD requires an inspection to determine if certain motor-operated valve (MOV) actuators for the fuel valves are installed, and replacement of any affected actuators. Previous ADs addressed this Special Federal Aviation Regulation No. 88 (SFAR 88) issue for the majority of the airplanes delivered with these actuators. Since those ADs did not cover all of the airplanes, and for some airplanes delivered with improved actuators, there was no restriction on installation of replacement actuators with the unsafe condition, this additional rulemaking action is required. As with the related ADs, we are issuing this AD to prevent electrical energy from lightning, hot shorts, or fault current from entering the fuel tank through the fuel valve actuator shaft, which could result in fuel tank explosions and consequent loss of the airplane.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 757-200 and -200CB series airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the lap splices at stringer (S)-14R, lower fastener row, are subject to widespread fatigue damage (WFD). This proposed AD would require repetitive external dual frequency eddy current (DFEC) or internal high frequency eddy current (HFEC) inspections of the lap splice, inner skin fasteners, at S-14R, station (STA) 440 through STA 540, and corrective action if necessary. We are proposing this AD to detect and correct cracking of the fuselage skin lap splice. Such cracking could result in reduced structural integrity of the airplane.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.