Airworthiness Directives; The Boeing Company Airplanes, 11687-11689 [2016-04679]

Download as PDF Federal Register / Vol. 81, No. 44 / Monday, March 7, 2016 / Proposed Rules Proposed rulemaking; notice of public meeting. ACTION: This document announces that the U.S. Department of Energy (DOE) will hold a public workshop to discuss the proposed rule for the coordination of federal authorizations for electric transmission facilities for the Integrated Interagency Pre-application (IIP) process. The public workshop will include a presentation describing the proposed rule and will allow for questions and comments about and on the rule. DATES: The public workshop will be held on March 22, 2016, beginning at 1:00 p.m. Eastern Time. Written comments are welcome before or after the workshop and should be submitted prior to the end of the public comment period for the proposed rule (April 4, 2016). SUMMARY: The meeting will be held via webinar and conference call. The webinar invitation, phone number, and instructions on how to register and log in to the webinar will be available at: https://energy.gov/oe/downloads/noticeproposed-rulemaking-integratedinteragency-pre-application-process-iipelectric. You may submit comments, identified by RIN 1901–AB36, by any of the following methods: 1. Follow the instructions for submitting comments on the Federal eRulemaking Portal at https:// www.regulations.gov. 2. Send email to oeregs@hq.doe.gov. Include RIN 1901–AB36 in the subject line of the email. Please include the full body of your comments in the text of the message or as an attachment. 3. Address postal mail to U.S. Department of Energy, Office of Electricity Delivery and Energy Reliability, Mailstop OE–20, Room 8G– 017, 1000 Independence Avenue SW., Washington, DC 20585. Due to potential delays in the delivery of postal mail, we encourage respondents to submit comments electronically to ensure timely receipt. This notice, a transcript of the public workshop, and any comments that DOE receives on the proposed rulemaking will be made available on the DOE Web site at https://energy.gov/oe/downloads/ notice-proposed-rulemaking-integratedinteragency-pre-application-process-iipelectric. You may request a hardcopy of the workshop transcript or comments be sent to you via postal mail by contacting the DOE’s Office of Electricity Delivery and Energy Reliability. FOR FURTHER INFORMATION CONTACT: Julie A. Smith, Ph.D., U.S. Department of mstockstill on DSK4VPTVN1PROD with PROPOSALS ADDRESSES: VerDate Sep<11>2014 16:20 Mar 04, 2016 Jkt 238001 Energy, Office of Electricity Delivery and Energy Reliability, Mailstop OE–20, Room 8G–017, 1000 Independence Avenue SW., Washington, DC 20585; or oeregs@hq.doe.gov. On February 2, 2016, DOE published a proposed rule in the Federal Register (81 FR 5383) to provide a process for the timely coordination of Federal authorizations for proposed transmission facilities pursuant to section 216(h) of the FPA (16 U.S.C. 824p(h)). The rule would establish an early pre-application process (the Integrated Interagency Pre-application (IIP) process) in support of this coordination and the selection of a NEPA lead agency. The proposed regulations provide a framework for DOE to facilitate early cooperation and exchange of environmental information required to site qualified electric transmission facilities. These activities would occur prior to an applicant filing a request for authorization with Federal permitting agencies. The proposed regulations also provide an opportunity for non-Federal agencies (tribal, state, or local governments) to coordinate separate non-Federal permitting and environmental reviews with those of the Federal permitting agencies. This document announces the public workshop described in the proposed rule. Members of the public are welcome to pre-register for the webinar if they would like to make oral statements during the specified period for public comment. To pre-register to provide public comments, please email oeregs@ hq.doe.gov. In the email, please indicate your name, organization (if appropriate), citizenship, and contact information. If you would like to receive further information on the proposed rule or IIP process, please include your email address in your pre-registration email. An audio recording and written transcript of the public workshop, and any comments that DOE receives during the workshop, will be made available after the webinar on the DOE Web site at https://energy.gov/oe/downloads/ notice-proposed-rulemaking-integratedinteragency-pre-application-process-iipelectric. You may request a hardcopy of the workshop transcript or comments be sent to you via postal mail by contacting DOE’s Office of Electricity Delivery and Energy Reliability. SUPPLEMENTARY INFORMATION: PO 00000 Frm 00010 Fmt 4702 Sfmt 4702 11687 Issued in Washington, DC, on February 29, 2016. Meghan Conklin, Deputy Assistant Secretary, Office of Electricity Delivery and Energy Reliability. [FR Doc. 2016–04986 Filed 3–4–16; 8:45 am] BILLING CODE 6450–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2016–3992; Directorate Identifier 2015–NM–075–AD] RIN 2120–AA64 Airworthiness Directives; The Boeing Company Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787–8 airplanes. This proposed AD was prompted by a report that a captain’s seat moved uncommanded during a landing rollout due to a failure in the seat horizontal actuator. This proposed AD would require repetitive tests of the captain and first officer seat assemblies for proper operation, and corrective action if necessary. This proposed AD would also require installing new captain and first officer seat assemblies, which would terminate the repetitive tests. We are proposing this AD to prevent a seat actuator clutch failure, which could result in a loss of seat locking and uncommanded motion of the captain’s or first officer’s seat; uncommanded seat movement could result in reduced controllability of the airplane. DATES: We must receive comments on this proposed AD by April 21, 2016. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: Deliver to Mail address above between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. SUMMARY: E:\FR\FM\07MRP1.SGM 07MRP1 11688 Federal Register / Vol. 81, No. 44 / Monday, March 7, 2016 / Proposed Rules For service information identified in this NPRM, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H–65, Seattle, WA 98124–2207; telephone 206–544–5000, extension 1; fax 206– 766–5680; Internet https:// www.myboeingfleet.com. It is also available on the internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2016– 3992. Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2016– 3992; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Office (phone: 800–647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Brandon Lucero, Aerospace Engineer, Cabin Safety and Environmental Systems Branch, ANM–150S, FAA, Seattle Aircraft Certification Office (ACO), 1601 Lind Avenue SW., Renton, WA 98057–3356; phone: 425–917–6572; fax: 425–917–6590. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to send any written relevant data, views, or arguments about this proposal. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA– Issue 001, dated December 19, 2014. This service information provides procedures for installation of new captain and first officer seat assemblies, a test of the captain and first officer seat assemblies, and corrective action if necessary. This service information is reasonably available because the interested parties have access to it through their normal course of business or by the means identified in the ADDRESSES section. 2016–3992; Directorate Identifier 2015– NM–075–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD because of those comments. We will post all comments we receive, without change, to https:// www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD. FAA’s Determination We are proposing this AD because we evaluated all the relevant information and determined the unsafe condition described previously is likely to exist or develop in other products of the same type design. Discussion This proposed AD was prompted by a report that a captain’s seat moved uncommanded during a landing rollout due to a failure in the seat horizontal actuator. Investigation found press fit clutch pins in the actuator could migrate loose when subjected to repeated dynamic impact loading from clutch re-engagement when the manual horizontal control lever is released with the seat still moving on the tracks. The clutch pins can migrate loose, overturn, and force clutch plate separation, resulting in degraded or failed seat locking. We are proposing this AD to prevent a seat actuator clutch failure, which could result in a loss of seat locking and uncommanded motion of the captain’s or first officer’s seat; uncommanded seat movement could result in reduced controllability of the airplane. Proposed AD Requirements This proposed AD would require accomplishing the actions specified in the service information described previously. For information on the procedures and compliance times, see this service information at https:// www.regulations.gov by searching for and locating Docket No. FAA–2016– 3992. The phrase ‘‘corrective actions’’ is used in this proposed AD. ‘‘Corrective actions’’ are actions that correct or address any condition found. Corrective actions in an AD could include, for example, repairs. Costs of Compliance We estimate that this proposed AD affects 18 airplanes of U.S. registry. We estimate the following costs to comply with this proposed AD: Related Service Information Under 1 CFR Part 51 We reviewed Boeing Alert Service Bulletin B787–81205–SB250054–00, ESTIMATED COSTS Action Labor cost Operational test ...................... Seat assembly installation ..... Cost per product 2 work-hours × $85 per hour $0 ........................................... = $170 per test cycle. 3 work-hours × $85 per hour $15,141 per seat × 2 seats = = $255 to replace two seats. $30,282. We estimate the following costs to do any necessary corrective actions that mstockstill on DSK4VPTVN1PROD with PROPOSALS Parts cost Cost on U.S. operators $170 per test cycle ................ $3060 30,537 to replace two seats .. 549,666 would be required based on the results of the proposed operational tests. We have no way of determining the number of aircraft that might need these actions: ON-CONDITION COSTS Action Replacement Replacement Replacement Replacement VerDate Sep<11>2014 of of of of Labor cost captain seat vertical actuator .............................. captain seat horizontal actuator .......................... first officer seat vertical actuator ......................... first officer seat horizontal actuator ..................... 16:20 Mar 04, 2016 Jkt 238001 PO 00000 Frm 00011 2 2 2 2 work-hours work-hours work-hours work-hours Fmt 4702 × × × × Sfmt 4702 $85 $85 $85 $85 per per per per hour hour hour hour Parts cost = = = = $170 $170 $170 $170 E:\FR\FM\07MRP1.SGM .......... .......... .......... .......... 07MRP1 $7,500 7,500 7,500 7,500 Cost per product $7,670 7,670 7,670 7,670 Federal Register / Vol. 81, No. 44 / Monday, March 7, 2016 / Proposed Rules Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. Subtitle VII: Aviation Programs, describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in Subtitle VII, Part A, Subpart III, Section 44701: ‘‘General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: (1) Is not a ‘‘significant regulatory action’’ under Executive Order 12866, (2) Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979), (3) Will not affect intrastate aviation in Alaska; and (4) Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. mstockstill on DSK4VPTVN1PROD with PROPOSALS List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. VerDate Sep<11>2014 16:20 Mar 04, 2016 Jkt 238001 § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ The Boeing Company: Docket No. FAA– 2016–3992; Directorate Identifier 2015– NM–075–AD. (a) Comments Due Date We must receive comments by April 21, 2016. (b) Affected ADs None. (c) Applicability This AD applies to The Boeing Company Model 787–8 airplanes, certificated in any category, as identified in Boeing Alert Service Bulletin B787–81205–SB250054–00, Issue 001, dated December 19, 2014. (d) Subject Air Transport Association (ATA) of America Code 25, Equipment/furnishings. (e) Unsafe Condition This AD was prompted by a report that a captain’s seat moved uncommanded during a landing rollout due to a failure in the seat horizontal actuator. We are issuing this AD to prevent a seat actuator clutch failure, which could result in a loss of seat locking and uncommanded motion of the captain’s or first officer’s seat; uncommanded seat motion could result in reduced controllability of the airplane. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Repetitive Tests of Captain and First Officer Seat Assembly Operation Within 1,000 flight hours after the effective date of this AD, test the operation of the captain and first officer seat assemblies and do all applicable corrective actions, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin B787–81205–SB250054–00, Issue 001, dated December 19, 2014. Do all applicable corrective actions before further flight. Repeat the operational test thereafter at intervals not to exceed 1,000 flight hours until the installation required by paragraph (h) of this AD is done. (h) New Seat Installation Within 72 months after the effective date of this AD, do the actions specified in paragraphs (h)(1) and (h)(2) of this AD, in accordance with the Accomplishment Instructions of Boeing Alert Service Bulletin B787–81205–SB250054–00, Issue 001, dated December 19, 2014. Installing the seat specified in paragraph (h)(1) or (h)(2) of this AD is terminating action for the repetitive operational tests required by paragraph (g) of this AD for that seat only. (1) Install new captain seat assembly, part number (P/N) 3A380–0007–01–7. (2) Install new first officer seat assembly, P/N 3A380–0008–01–7. PO 00000 Frm 00012 Fmt 4702 Sfmt 9990 11689 (i) Alternative Methods of Compliance (AMOCs) (1) The Manager, Seattle Aircraft Certification Office, ANM–150S, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. In accordance with 14 CFR 39.19, send your request to your principal inspector or local Flight Standards District Office, as appropriate. If sending information directly to the manager of the ACO, send it to the attention of the person identified in paragraph (j)(1) of this AD. (2) Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. (3) An AMOC that provides an acceptable level of safety may be used for any repair required by this AD if it is approved by the Boeing Commercial Airplanes Organization Designation Authorization (ODA) that has been authorized by the Manager, Seattle ACO, to make those findings. For a repair method to be approved, the repair must meet the certification basis of the airplane, and the approval must specifically refer to this AD. (4) For service information that contains steps that are labeled as Required for Compliance (RC), the provisions of paragraphs (i)(4)(i) and (i)(4)(ii) of this AD, apply. (i) The steps labeled as RC, including substeps under an RC step and any figures identified in an RC step, must be done to comply with the AD. An AMOC is required for any deviations to RC steps, including substeps and identified figures. (ii) Steps not labeled as RC may be deviated from using accepted methods in accordance with the operator’s maintenance or inspection program without obtaining approval of an AMOC, provided the RC steps, including substeps and identified figures, can still be done as specified, and the airplane can be put back in an airworthy condition. (j) Related Information (1) For more information about this AD, contact Brandon Lucero, Aerospace Engineer, Cabin Safety and Environmental Systems Branch, ANM–150S, FAA, Seattle Aircraft Certification Office (ACO), 1601 Lind Avenue SW., Renton, WA 98057–3356; phone: 425– 917–6572; fax: 425–917–6590. (2) For service information identified in this AD, contact Boeing Commercial Airplanes, Attention: Data & Services Management, P.O. Box 3707, MC 2H–65, Seattle, WA 98124–2207; telephone 206– 544–5000, extension 1; fax 206–766–5680; Internet https://www.myboeingfleet.com. You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. Issued in Renton, Washington, on February 23, 2016. Dionne Palermo, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2016–04679 Filed 3–4–16; 8:45 am] BILLING CODE 4910–13–P E:\FR\FM\07MRP1.SGM 07MRP1

Agencies

[Federal Register Volume 81, Number 44 (Monday, March 7, 2016)]
[Proposed Rules]
[Pages 11687-11689]
From the Federal Register Online via the Government Publishing Office [www.gpo.gov]
[FR Doc No: 2016-04679]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2016-3992; Directorate Identifier 2015-NM-075-AD]
RIN 2120-AA64


Airworthiness Directives; The Boeing Company Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for 
certain The Boeing Company Model 787-8 airplanes. This proposed AD was 
prompted by a report that a captain's seat moved uncommanded during a 
landing rollout due to a failure in the seat horizontal actuator. This 
proposed AD would require repetitive tests of the captain and first 
officer seat assemblies for proper operation, and corrective action if 
necessary. This proposed AD would also require installing new captain 
and first officer seat assemblies, which would terminate the repetitive 
tests. We are proposing this AD to prevent a seat actuator clutch 
failure, which could result in a loss of seat locking and uncommanded 
motion of the captain's or first officer's seat; uncommanded seat 
movement could result in reduced controllability of the airplane.

DATES: We must receive comments on this proposed AD by April 21, 2016.

ADDRESSES: You may send comments, using the procedures found in 14 CFR 
11.43 and 11.45, by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.
     Fax: 202-493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: Deliver to Mail address above between 9 
a.m. and 5 p.m., Monday through Friday, except Federal holidays.

[[Page 11688]]

    For service information identified in this NPRM, contact Boeing 
Commercial Airplanes, Attention: Data & Services Management, P.O. Box 
3707, MC 2H-65, Seattle, WA 98124-2207; telephone 206-544-5000, 
extension 1; fax 206-766-5680; Internet https://www.myboeingfleet.com. 
It is also available on the internet at https://www.regulations.gov by 
searching for and locating Docket No. FAA-2016-3992.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2016-
3992; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this proposed AD, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Office (phone: 800-647-5527) is in the ADDRESSES section. Comments will 
be available in the AD docket shortly after receipt.

FOR FURTHER INFORMATION CONTACT: Brandon Lucero, Aerospace Engineer, 
Cabin Safety and Environmental Systems Branch, ANM-150S, FAA, Seattle 
Aircraft Certification Office (ACO), 1601 Lind Avenue SW., Renton, WA 
98057-3356; phone: 425-917-6572; fax: 425-917-6590.

SUPPLEMENTARY INFORMATION:

Comments Invited

    We invite you to send any written relevant data, views, or 
arguments about this proposal. Send your comments to an address listed 
under the ADDRESSES section. Include ``Docket No. FAA-2016-3992; 
Directorate Identifier 2015-NM-075-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of this proposed AD. We 
will consider all comments received by the closing date and may amend 
this proposed AD because of those comments.
    We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We 
will also post a report summarizing each substantive verbal contact we 
receive about this proposed AD.

Discussion

    This proposed AD was prompted by a report that a captain's seat 
moved uncommanded during a landing rollout due to a failure in the seat 
horizontal actuator. Investigation found press fit clutch pins in the 
actuator could migrate loose when subjected to repeated dynamic impact 
loading from clutch re-engagement when the manual horizontal control 
lever is released with the seat still moving on the tracks. The clutch 
pins can migrate loose, overturn, and force clutch plate separation, 
resulting in degraded or failed seat locking.
    We are proposing this AD to prevent a seat actuator clutch failure, 
which could result in a loss of seat locking and uncommanded motion of 
the captain's or first officer's seat; uncommanded seat movement could 
result in reduced controllability of the airplane.

Related Service Information Under 1 CFR Part 51

    We reviewed Boeing Alert Service Bulletin B787-81205-SB250054-00, 
Issue 001, dated December 19, 2014. This service information provides 
procedures for installation of new captain and first officer seat 
assemblies, a test of the captain and first officer seat assemblies, 
and corrective action if necessary. This service information is 
reasonably available because the interested parties have access to it 
through their normal course of business or by the means identified in 
the ADDRESSES section.

FAA's Determination

    We are proposing this AD because we evaluated all the relevant 
information and determined the unsafe condition described previously is 
likely to exist or develop in other products of the same type design.

Proposed AD Requirements

    This proposed AD would require accomplishing the actions specified 
in the service information described previously. For information on the 
procedures and compliance times, see this service information at https://www.regulations.gov by searching for and locating Docket No. FAA-2016-
3992.
    The phrase ``corrective actions'' is used in this proposed AD. 
``Corrective actions'' are actions that correct or address any 
condition found. Corrective actions in an AD could include, for 
example, repairs.

Costs of Compliance

    We estimate that this proposed AD affects 18 airplanes of U.S. 
registry.
    We estimate the following costs to comply with this proposed AD:

                                                 Estimated Costs
----------------------------------------------------------------------------------------------------------------
                                                                                                   Cost on U.S.
              Action                    Labor cost           Parts cost        Cost per product      operators
----------------------------------------------------------------------------------------------------------------
Operational test.................  2 work-hours x $85   $0.................  $170 per test cycle           $3060
                                    per hour = $170
                                    per test cycle.
Seat assembly installation.......  3 work-hours x $85   $15,141 per seat x   30,537 to replace           549,666
                                    per hour = $255 to   2 seats = $30,282.   two seats.
                                    replace two seats.
----------------------------------------------------------------------------------------------------------------

    We estimate the following costs to do any necessary corrective 
actions that would be required based on the results of the proposed 
operational tests. We have no way of determining the number of aircraft 
that might need these actions:

                                               On-Condition Costs
----------------------------------------------------------------------------------------------------------------
                                                                                                     Cost per
                    Action                                 Labor cost               Parts cost        product
----------------------------------------------------------------------------------------------------------------
Replacement of captain seat vertical actuator.  2 work-hours x $85 per hour =             $7,500          $7,670
                                                 $170.
Replacement of captain seat horizontal          2 work-hours x $85 per hour =              7,500           7,670
 actuator.                                       $170.
Replacement of first officer seat vertical      2 work-hours x $85 per hour =              7,500           7,670
 actuator.                                       $170.
Replacement of first officer seat horizontal    2 work-hours x $85 per hour =              7,500           7,670
 actuator.                                       $170.
----------------------------------------------------------------------------------------------------------------


[[Page 11689]]

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. Subtitle VII: Aviation Programs, 
describes in more detail the scope of the Agency's authority.
    We are issuing this rulemaking under the authority described in 
Subtitle VII, Part A, Subpart III, Section 44701: ``General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    (1) Is not a ``significant regulatory action'' under Executive 
Order 12866,
    (2) Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979),
    (3) Will not affect intrastate aviation in Alaska; and
    (4) Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority:  49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

The Boeing Company: Docket No. FAA-2016-3992; Directorate Identifier 
2015-NM-075-AD.

(a) Comments Due Date

    We must receive comments by April 21, 2016.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to The Boeing Company Model 787-8 airplanes, 
certificated in any category, as identified in Boeing Alert Service 
Bulletin B787-81205-SB250054-00, Issue 001, dated December 19, 2014.

(d) Subject

    Air Transport Association (ATA) of America Code 25, Equipment/
furnishings.

(e) Unsafe Condition

    This AD was prompted by a report that a captain's seat moved 
uncommanded during a landing rollout due to a failure in the seat 
horizontal actuator. We are issuing this AD to prevent a seat 
actuator clutch failure, which could result in a loss of seat 
locking and uncommanded motion of the captain's or first officer's 
seat; uncommanded seat motion could result in reduced 
controllability of the airplane.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Repetitive Tests of Captain and First Officer Seat Assembly 
Operation

    Within 1,000 flight hours after the effective date of this AD, 
test the operation of the captain and first officer seat assemblies 
and do all applicable corrective actions, in accordance with the 
Accomplishment Instructions of Boeing Alert Service Bulletin B787-
81205-SB250054-00, Issue 001, dated December 19, 2014. Do all 
applicable corrective actions before further flight. Repeat the 
operational test thereafter at intervals not to exceed 1,000 flight 
hours until the installation required by paragraph (h) of this AD is 
done.

(h) New Seat Installation

    Within 72 months after the effective date of this AD, do the 
actions specified in paragraphs (h)(1) and (h)(2) of this AD, in 
accordance with the Accomplishment Instructions of Boeing Alert 
Service Bulletin B787-81205-SB250054-00, Issue 001, dated December 
19, 2014. Installing the seat specified in paragraph (h)(1) or 
(h)(2) of this AD is terminating action for the repetitive 
operational tests required by paragraph (g) of this AD for that seat 
only.
    (1) Install new captain seat assembly, part number (P/N) 3A380-
0007-01-7.
    (2) Install new first officer seat assembly, P/N 3A380-0008-01-
7.

(i) Alternative Methods of Compliance (AMOCs)

    (1) The Manager, Seattle Aircraft Certification Office, ANM-
150S, FAA, has the authority to approve AMOCs for this AD, if 
requested using the procedures found in 14 CFR 39.19. In accordance 
with 14 CFR 39.19, send your request to your principal inspector or 
local Flight Standards District Office, as appropriate. If sending 
information directly to the manager of the ACO, send it to the 
attention of the person identified in paragraph (j)(1) of this AD.
    (2) Before using any approved AMOC, notify your appropriate 
principal inspector, or lacking a principal inspector, the manager 
of the local flight standards district office/certificate holding 
district office.
    (3) An AMOC that provides an acceptable level of safety may be 
used for any repair required by this AD if it is approved by the 
Boeing Commercial Airplanes Organization Designation Authorization 
(ODA) that has been authorized by the Manager, Seattle ACO, to make 
those findings. For a repair method to be approved, the repair must 
meet the certification basis of the airplane, and the approval must 
specifically refer to this AD.
    (4) For service information that contains steps that are labeled 
as Required for Compliance (RC), the provisions of paragraphs 
(i)(4)(i) and (i)(4)(ii) of this AD, apply.
    (i) The steps labeled as RC, including substeps under an RC step 
and any figures identified in an RC step, must be done to comply 
with the AD. An AMOC is required for any deviations to RC steps, 
including substeps and identified figures.
    (ii) Steps not labeled as RC may be deviated from using accepted 
methods in accordance with the operator's maintenance or inspection 
program without obtaining approval of an AMOC, provided the RC 
steps, including substeps and identified figures, can still be done 
as specified, and the airplane can be put back in an airworthy 
condition.

(j) Related Information

    (1) For more information about this AD, contact Brandon Lucero, 
Aerospace Engineer, Cabin Safety and Environmental Systems Branch, 
ANM-150S, FAA, Seattle Aircraft Certification Office (ACO), 1601 
Lind Avenue SW., Renton, WA 98057-3356; phone: 425-917-6572; fax: 
425-917-6590.
    (2) For service information identified in this AD, contact 
Boeing Commercial Airplanes, Attention: Data & Services Management, 
P.O. Box 3707, MC 2H-65, Seattle, WA 98124-2207; telephone 206-544-
5000, extension 1; fax 206-766-5680; Internet https://www.myboeingfleet.com. You may view this service information at the 
FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
WA. For information on the availability of this material at the FAA, 
call 425-227-1221.

    Issued in Renton, Washington, on February 23, 2016.
Dionne Palermo,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2016-04679 Filed 3-4-16; 8:45 am]
 BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.