Federal Aviation Administration 2013 – Federal Register Recent Federal Regulation Documents

The FAA is issuing this notice to advise the public of a meeting of the ARAC.

We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 757 airplanes. This AD was prompted by reports of fuel leaking from the front spar of the wing through the slat track housing. This AD requires a detailed inspection of the inboard and outboard main slat track downstop assemblies and a torque application to the main track downstop assembly nuts of slat numbers 1 through 10, excluding the outboard track of slats 1 and 10; a detailed inspection of all slat track housings for foreign object debris (FOD) and visible damage; and corrective actions if necessary. We are issuing this AD to detect and correct incorrectly installed main slat track downstop assemblies, which, when the slat is retracted, could cause a puncture in the slat track housing and lead to a fuel leak and potential fire.

These special conditions are issued for the Bombardier Aerospace Model BD-500-1A10 and BD-500-1A11 airplanes. These airplanes will have a novel or unusual design feature, specifically sidestick controllers designed to be operated with only one hand. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The FAA is correcting the effective date of a final rule correction for flightcrew member duty and rest requirements published on February 6, 2013, that required technical corrections in the codified text of the final flightcrew member duty and rest rule. The correct effective date of the rule should read January 4, 2014.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Aircraft owners are required to complete the Aircraft Registration Renewal to verify the registration information and renew registration triennially. The information collected on an Aircraft Re- Registration Application, AC Form 8050-1A and an Aircraft Registration Renewal Application, AC Form 8050-1B, will be used by the FAA to verify and update aircraft registration information collected for an aircraft when it was first registered.

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This action proposes to modify two jet routes and seven VOR Federal airways; and remove two VOR Federal airways in the vicinity of Jackson, MS. The FAA is proposing this action due to the scheduled decommissioning of the Jackson, MS, VORTAC, and the commissioning of the Magnolia, MS, VORTAC navigation aids.

We are adopting a new airworthiness directive (AD) for all Rolls-Royce Deutschland Ltd & Co KG (RRD) BR700-710A1-10 and BR700- 710A2-20 turbofan engines, and certain BR700-710C4-11 model engines. This AD was prompted by RRD performing an evaluation that determined that certain high-pressure turbine (HPT) stage 1 and stage 2 discs from a specific supplier may contain steel inclusions that may cause the discs to fail before they reach their current life limits. This AD requires reducing the life limits for certain HPT stage 1 and stage 2 discs. We are issuing this AD to prevent failure of the HPT stage 1 and stage 2 discs, which could result in uncontained failure of the engine and damage to the airplane.

The FAA is considering a proposal to change a portion of airport land from aeronautical use to non-aeronautical use and to authorize the sale of the airport property. The Will County Department of Highways has offered fair market value to purchase the land for the Weber Road improvement project. The parcel is not needed for aeronautical purposes and the proceeds from the sale of the land will be used for future airport improvement projects. This notice announces that the FAA is considering the release of the subject airport property at the Lewis University Airport, Romeoville, IL, from all federal land covenants. Approval does not constitute a commitment by the FAA to financially assist in disposal of the subject airport property nor a determination that all measures covered by the program are eligible for grant-in-aid funding from the FAA.

This action amends special conditions No. 23-258-SC, issued on July 13, 2012, for the Tamarack Aerospace Group's modification to the Cirrus Model SR22 airplane. This amendment clarifies the intent of two requirements: The requirement for reporting of load alleviation system failures (see paragraph (c) under Loads, Probability of Failure of Load Alleviation System) and the requirement for consideration of limit loads with an unannunciated load alleviation system failure (see paragraph (b) under Factor of Safety, Load Alleviation Systems). This airplane as modified by Tamarack will have a novel or unusual design feature(s) associated with Tamarack Aerospace Group's modification. The design change will install winglets and an Active Technology Load Alleviation System (ATLAS). The addition of the ATLAS mitigates the negative effects of the winglets by effectively aerodynamically turning off the winglet under limit gust and maneuver loads. This is accomplished by measuring the aircraft loading and moving a small aileron-like device called a Tamarack Active Control Surface (TACS). The TACS movement reduces lift at the tip of the wing, resulting in the wing center of pressure moving inboard, thus reducing bending stresses along the wing span. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These final special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards. Additionally, this amendment corrects the issue date of special condition No. 23-258-SC to July 13, 2012.

This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

The Federal Aviation Administration (FAA) announces its determination that the Noise Exposure Maps submitted by Metropolitan Nashville Airport Authority for Nashville International Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

We are superseding an existing airworthiness directive (AD) for the Bell Helicopter Textron (Bell) Model 212 helicopters and adopting requirements for Bell Model 204B, 205A, 205A-1, 205B and 210 helicopters with certain part-numbered main rotor hub inboard strap fittings (fittings). This AD requires magnetic particle inspecting (MPI) the fittings for a crack, and if a crack exists, replacing the fittings with airworthy fittings. This AD is prompted by reports of additional cracked fittings and the determination that additional part-numbered fittings may not have been manufactured in accordance with approved manufacturing processes and controls. These actions are intended to identify a crack in the fitting, which may lead to the fitting's failure, loss of a main rotor blade, and subsequent loss of helicopter control.

We are adopting a new airworthiness directive (AD) for all Dassault Aviation Model Mystere-Falcon 50 airplanes. This AD was prompted by a manufacturer revision to the airplane maintenance manual (AMM) that introduces new or more restrictive maintenance requirements and airworthiness limitations. This AD requires revising the maintenance program to incorporate new or revised maintenance requirements and airworthiness limitations. We are issuing this AD to prevent reduced structural integrity of the airplane.

We are adopting a new airworthiness directive (AD) for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300- 600 series airplanes); and Airbus Model A310 series airplanes. This AD was prompted by fuel system reviews conducted by the European Aviation Safety Agency (EASA). This AD requires modifying the electrical control circuits of the inner, center, and trim tank pumps, as applicable. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for DG Flugzeugbau GmbH Model DG-1000T gliders equipped with Solo Kleinmotoren Model 2350 C engines. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a material defect of the propeller shaft, most likely caused by a manufacturing error. We are issuing this AD to require actions to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for the Schweizer Aircraft Corporation (Schweizer) Model 269D and Model 269D Configuration A helicopters. The type certificate for these models is currently held by Sikorsky Aircraft Corporation (Sikorsky). This AD requires inspecting the aft fuselage assembly in the area around the attachment point of the horizontal stabilizer, including the paint, for a crack. This AD also requires inspecting the tailboom interior support structure, and if necessary, installing an inspection panel kit in the aft fuselage assembly, and installing doublers in the stabilizer support brackets. This AD is prompted by reports of loose horizontal stabilizers and cracks in the stabilizer support structure for the extruded tailboom. The actions are intended to prevent separation of the horizontal stabilizer from the helicopter and subsequent loss of control of the helicopter.

We are superseding an existing airworthiness directive (AD) for all Pacific Aerospace Limited Models FU24-954 and FU24A-954 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as aircraft operating outside the aircraft aft center of gravity (C of G) limits during parachute-drop operations. Exceeding C of G limits could result in loss of control of the aircraft. We are issuing this AD to require actions to address the unsafe condition on these products.

The FAA proposes to rule and invites public comment on the release of land at the Colonel James Jabara Airport (AAO), Wichita, Kansas, under the provisions of 49 U.S.C. 47107(h)(2).

The FAA proposes to rule and invite public comment on the release of land at the Woodbine Municipal Airport, Woodbine, New Jersey under the provision 49 U.P.C. 47125(a).

We propose to adopt a new airworthiness directive (AD) for Eurocopter France (Eurocopter) Model AS350 and AS355 helicopters, to require inspecting for a crack in the control lever attachment yokes, and if needed, replacing the tail rotor gearbox (TGB). This proposed AD is prompted by improper casting of TGB casing assemblies, which may lead to cracking. A crack in the control lever attachment yokes could cause a loss of tail rotor pitch control, and consequently, loss of control of the helicopter.

We propose to supersede an existing airworthiness directive (AD) that applies to all Airbus Model A318, A319, A320, and A321 series airplanes. The existing AD currently requires repetitive inspections of the upper support of the nose landing gear (NLG), and related investigative and corrective actions if necessary; and also provides an optional terminating action for the repetitive inspections. Since we issued that AD, we have determined that previously allowed terminating actions no longer address the unsafe condition and that a new terminating action is necessary. This proposed AD would require installing a new enhanced manufacturing and maintainability (EMM) braking and steering control unit (BSCU) standard and adds airplanes to the applicability. We are proposing this AD to prevent landings with the NLG turned 90 degrees from centerline, which could result in reduced controllability of the airplane.

The Federal Aviation Administration (FAA) announces its determination that the Noise Exposure Maps submitted by the Lee County Port Authority for the Southwest Florida International Airport under the provisions of 49 U.S.C. 47501 et. Seq (Aviation Safety and Noise Abatement Act) and 14 CFR Part 150 are in compliance with applicable requirements.

These special conditions are issued for the Embraer S.A., Model EMB-550 airplane. This airplane will have a novel or unusual design feature(s) associated with hydrophobic coatings. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This SNPRM amends the notice of proposed rulemaking (NPRM) published on October 22, 2012 which proposed to amend VHF omnidirectional range (VOR) Federal airway V-595 in Oregon. This SNPRM proposes to remove an additional segment of the airway due to high terrain and navigation aid coverage issues.