Federal Aviation Administration April 2, 2010 – Federal Register Recent Federal Regulation Documents

The FAA is issuing this notice to advise the public of a meeting of EUROCAE WG-72: RTCA Special Committee 216: Aeronautical Systems Security (Joint Meeting).

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Surface defects were visually detected on the rudder of one A319 and one A321 in-service aeroplane. Investigation has determined that the defects reported on both rudders corresponded to areas that had been reworked in production. The investigation confirmed that the defects were a result of de-bonding between the skin and honeycomb core. An extended de-bonding, if not detected and corrected, may degrade the structural integrity of the rudder. The loss of the rudder leads to degradation of the handling qualities and reduces the controllability of the aeroplane.

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: Surface defects were visually detected on the rudder of one Airbus A319 and one A321 in-service aeroplane. Investigation has determined that the defects reported on both rudders corresponded to areas that had been reworked in production. The investigation confirmed that the defects were the result of de-bonding between the skin and honeycomb core. Such reworks were also performed on some rudders fitted on A310 and A300-600 aeroplanes. An extended de-bonding, if not detected and corrected, may degrade the structural integrity of the rudder. The loss of the rudder leads to degradation of the handling qualities and reduces the controllability of the aeroplane.

The Federal Aviation Administration is requesting public comment on the release of land at the Cincinnati/Northern Kentucky International Airport in the city of Hebron, Kentucky. This property, approximately 75.88 acres of fee simple release, and approximately 28.48 acres of requested easement, will change to a non-aeronautical use. This action is taken under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).

Pursuant to section 10(a)(2) of the Federal Advisory Committee Act (Pub. L. 92-463, 5 U.S.C. App. 2), notice is hereby given of the meetings of the Commercial Space Transportation Advisory Committee (COMSTAC). The meetings will take place on Tuesday and Wednesday, May 18 and 19, 2010, starting at 8 a.m. at the National Housing Center, 1201 15th Street NW., Washington, DC 20005.

The FAA is superseding an existing airworthiness directive (AD) for Rolls-Royce plc RB211-Trent 700 series turbofan engines. That AD currently requires initial and repetitive borescope inspections of the high-pressure-and-intermediate pressure (HP-IP) turbine internal and external oil vent tubes for coking and carbon buildup, and cleaning or replacing the vent tubes if necessary. This AD requires the same actions, but adds additional inspections of the vent flow restrictor. This AD results from further analysis that the cleaning of the vent tubes required by AD 2007-02-05 could lead to loosened carbon fragments, causing a blockage downstream in the vent flow restrictor. We are issuing this AD to prevent internal oil fires due to coking and carbon buildup that could cause uncontained engine failure and damage to the airplane.

The FAA is requesting public comment on the Town of Houlton's request to change a portion (4.68 acres) of Airport property from

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is superseding an existing airworthiness directive (AD), which applies to certain Model 747-200C and -200F series airplanes. That AD currently requires repetitive inspections to find fatigue cracking in the floor panel attachment fastener holes of the upper chord of certain upper deck floor beams in Section 41 (i.e., body station 520 and forward), and repair if necessary. The existing AD also provides optional modifications, which extend the threshold for initiating certain repetitive inspections. This new AD requires additional repetitive inspections to find fatigue cracking in the floor panel attachment fastener holes of the upper chord of certain other upper deck floor beams in Section 41 and Section 42 (i.e., aft of body station 520); repetitive inspections to find fatigue cracking in the permanent fastener holes of the upper chord of certain upper deck floor beams in Section 41; and related investigative and corrective actions. This new AD also provides a new optional modification, which terminates certain repetitive inspections. This AD results from new reports of cracking in the upper chord of the upper deck floor beams in Sections 41 and 42, and new analysis that shows the permanent fastener holes of the upper chord of certain upper deck floor beams in Section 41 are also susceptible to fatigue cracking. We are issuing this AD to detect and correct cracking in the upper chord of the upper deck floor beams. Such cracking could extend and sever the floor beams, which could result in rapid decompression and loss of controllability of the airplane.