Department of Transportation November 2024 – Federal Register Recent Federal Regulation Documents
Results 1 - 50 of 189
Office of the Chief Financial Officer and Assistant Secretary for Budget and Programs; U.S. Department of Transportation Learning Agenda: Fiscal Years 2024-2026, Response to Comments Received
This document provides the public with responses to the comments received for Federal Register Request for Information "Office of the Chief Financial Officer and Assistant Secretary for Budget and Programs; U.S. Department of Transportation Learning Agenda Supplement: Fiscal Years 2024-2026" (Docket No. DOT-OST-2024-0005).
Notice of Final Nonavailability Waiver of Buy America Requirements for Certain High-Speed Rail Products for the California Inaugural High-Speed Rail Service Project
The Federal Railroad Administration (FRA) is issuing a waiver of its Buy America requirements to the California High-Speed Rail Authority (the Authority) to use certain products that are not produced in the United States for use in the California Inaugural High-Speed Rail Service Project between Merced, California and Bakersfield, California (Project). FRA is funding the Project under the Federal- State Partnership for Intercity Passenger Rail Program (FSP Program); therefore, FRA's Buy America requirements apply to the Project. FRA's Buy America requirements include both FRA's statutory requirements, which require 100 percent of the manufactured products and steel and iron used in an FRA-funded project to be produced in the United States, and the Build America, Buy America Act (BABA), which requires that all construction materials used in the FRA-funded project be produced in the United States. FRA is not waiving the applicable BABA requirements for construction materials used in the Project. The final waiver would apply to the aluminum car shells, signal systems, high-speed rail turnouts and fire alarm systems based on the domestic nonavailability of such products, as identified by the Authority. The Authority estimates that over 98 percent of the total direct dollar expenditures for the Project would be spent on domestically sourced products and labor, including 100 percent of the civil infrastructure costs.
Special Conditions: The Boeing Company, Boeing Model 747-8 Series Airplane; Short-Term Occupancy of Lower Lobe During Flight and Installation of Stairway Between Main Deck and Lower-Lobe
This action proposes special conditions for The Boeing Company (Boeing) Model 747-8 series airplane. This airplane, as modified by Boeing, will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. This design feature is the installation of stairs for flightcrew to access the forward and aft lower lobe compartments during flight. These compartments will have two main functions: storage of service items and that of a Class C cargo compartment. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Modification of Class E Airspace; Colusa County Airport, Colusa, CA
This action proposes to modify the Class E airspace extending upward from 700 feet above the surface of the earth and remove the Class E airspace extending upward from 1,200 feet above the surface at Colusa County Airport, Colusa, CA. Additionally, this action proposes administrative amendments to update the airport's Class E airspace legal description. These actions would support the safety and management of instrument flight rules (IFR) operations at the airport.
Airworthiness Directives; Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
The FAA proposes to supersede Airworthiness Directive (AD) 2008-10-01 and AD 2010-05-51, which apply to certain Eurocopter France (now Airbus Helicopters) Model EC120B helicopters. AD 2008-10-01 requires replacing certain part-numbered and serial-numbered spherical thrust bearings. AD 2010-05-51 requires repetitively inspecting the main rotor (M/R) head rotor hub (rotor hub) and, depending on the results, taking corrective action. Since the FAA issued those ADs, the manufacturer revised the airworthiness limitations section (ALS) to incorporate various airworthiness limitations, tasks, and associated thresholds and intervals that were previously contained in service bulletins, as well as incorporate a new task. This proposed AD would require revising the ALS of the existing maintenance manual (MM) or instructions for continued airworthiness (ICAs) and the existing approved maintenance or inspection program, as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus Helicopters Model SA341G and SA342J helicopters. This proposed AD was prompted by a report of a pilot collective pitch stick handle grip that broke when pulled. This proposed AD would require replacing certain pilot collective pitch stick handle grips and prohibit installing those pilot collective pitch stick handle grips. These actions are specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Amendment of Class D and Class E Airspace; Goldsboro, NC
This action proposes to amend Class E airspace extending upward from 700 feet above the surface for Goldsboro, NC, by adding airspace for Wayne Memorial Hospital Inc. Heliport, Goldsboro, NC. Additionally, this action would bring the Goldsboro Class D and Class E airspace into compliance with FAA orders and support instrument flight rule (IFR) procedures and operations.
Federal Motor Vehicle Safety Standards; Automatic Emergency Braking Systems for Light Vehicles
This document grants parts of petitions for reconsideration of a May 9, 2024, final rule that adopted Federal Motor Vehicle Safety Standard (FMVSS) No. 127, "Automatic Emergency Braking for Light Vehicles," which requires automatic emergency braking (AEB), pedestrian automatic emergency braking (PAEB), and forward collision warning (FCW) systems on all new light vehicles. This final rule clarifies requirements applicable to FCW visual signals and audio signals, corrects an error in the test scenario for obstructed pedestrian crossing the road, and removes superfluous language from the performance test requirement for lead vehicle AEB. This notice denies other requests in the petitions. This document also denies a petition for reconsideration, which is treated as a petition for rulemaking because it was received more than 45 days after publication of the rule.
Airworthiness Directives; De Havilland Aircraft of Canada Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain De Havilland Aircraft of Canada Limited Model DHC-8-401 and - 402 airplanes. This AD was prompted by a report of an in-flight event where isolation valve caution messages were received. This AD requires inspecting the fuse/shuttle valve serial numbers, and replacing certain fuse/shuttle valves, as specified in a Transport Canada AD, which is incorporated by reference (IBR). The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Canada Limited Partnership (Type Certificate Previously Held by C Series Aircraft Limited Partnership (CSALP); Bombardier, Inc.) Airplanes
The FAA is superseding Airworthiness Directive (AD) 2023-05- 08, which applied to certain Airbus Canada Limited Partnership Model BD-500-1A10 and BD-500-1A11 airplanes. AD 2023-05-08 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. This AD was prompted by a determination that new or more restrictive airworthiness limitations are necessary. This AD continues to require certain actions in AD 2023-05-08 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Qualification of Drivers; Exemption Applications; Hearing
FMCSA announces its decision to renew exemptions for 13 individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these hard of hearing and deaf individuals to continue to operate CMVs in interstate commerce.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model Airbus A350-941 and -1041 airplanes. This AD was prompted by a determination that the lower attachment studs on the aft galley complex may be installed incorrectly due to a missing instruction in the maintenance procedure task. This AD requires a one- time inspection of the lower attachment studs on the aft galley complex, and depending on findings, accomplishment of applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-1, V-29, V-38, V-139, and V-286; Eastern United States
This action proposes to amend domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-1, V-29, V-38, V-139, and V-286 in the eastern United States. The FAA is taking this action due to the planned decommissioning of the Salisbury, MD (SBY) VOR/Tactical Air Navigation (VORTAC) and the Snow Hill, MD (SWL), VORTAC. This action is in support of the FAA's VOR Minimum Operational Network (MON) Program.
Amendment of Domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-7, V-35, V-157, V-159, and V-198; Eastern United States
This action proposes to amend domestic Very High Frequency Omnidirectional Range (VOR) Federal Airways V-7, V-35, V-157, V-159, and V-198 in the eastern United States. The FAA is taking this action due to the planned decommissioning of the Cross City, FL (CTY), VOR/ Tactical Air Navigation (VORTAC) and the Taylor, FL (TAY), VORTAC. This action is in support of the FAA's VOR Minimum Operational Network (MON) Program.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for all The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This AD was prompted by a report that during manufacture of drag brace lower lock link assemblies for the main landing gear (MLG), a certain required inspection was not performed. This AD requires doing a check of maintenance records or an inspection to determine if certain drag brace lower lock link assemblies are installed, and applicable on-condition actions. This AD also prohibits the installation of affected parts. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; General Electric Company Engines.
The FAA proposes to adopt a new airworthiness directive (AD) for certain General Electric Company (GE) Model CT7-5A2, CT7-5A3, CT7- 7A, CT7-7A1, CT7-9B, CT7-9B1, CT7-9B2, CT7-9C, CT7-9C3, CT7-9D, and CT7-9D2 engines. This proposed AD was prompted by the manufacturer's determination that certain GE Model CT7 fleets have affected cooling plates installed that do not meet lifing guidelines. This proposed AD would require replacement of the stage 1 turbine forward cooling plate and the stage 2 turbine aft cooling plate. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Engines
The FAA proposes to supersede Airworthiness Directive (AD) 2022-24-06, which applies to certain Rolls-Royce Deutschland Ltd & Co KG (RRD) Model BR700-710A1-10, BR700-710A2-20, and BR700-710C4-11 engines. AD 2022-24-06 requires initial and repetitive visual inspections of certain low-pressure compressor (LPC) rotor (fan) disks and replacement of any LPC rotor (fan) disk with cracks detected. AD 2022-24-06 also allows for modification of the engine in accordance with RRD service information as a terminating action to these inspections. Since the FAA issued AD 2022-24-06, the manufacturer published updated service information and revised the engine maintenance manual (EMM) to provide instructions for an improved ultrasonic inspection method, which prompted this AD. This proposed AD would require initial and repetitive visual inspections of certain LPC rotor (fan) disks and replacement of any LPC rotor (fan) disk with cracks detected and would allow modification of the engine as a terminating action to the inspections, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Pratt & Whitney Canada Corp. Engines
The FAA proposes to adopt a new airworthiness directive (AD) for certain Pratt & Whitney Canada Corp. (P&WC) Model PW535E and PW535E1 engines. This proposed AD was prompted by a manufacturer design review that indicated certain flange bolts securing the gas generator case and turbine support case are susceptible to cracking at their current low-cycle fatigue (LCF) life. This proposed AD would require repetitive borescope inspections (BSI) of the gas generator case to turbine support case retaining bolts for evidence of bolt cracks, bolt fracture, missing bolts, or loose bolts and replacement, if necessary, as specified in a Transport Canada AD, which is incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Transforming Transportation Advisory Committee; Public Meeting
The Office of the Secretary of Transportation (OST) announces a public meeting of the Transforming Transportation Advisory Committee (TTAC) on Friday, December 13, 2024. This notice announces the date, time, and location of the meeting, which will be virtually open to the public. The purpose of the TTAC is to provide information, advice, and recommendations to the Secretary on matters relating to transportation innovations.
Qualification of Drivers; Exemption Applications; Epilepsy and Seizure Disorders
FMCSA announces receipt of applications from 13 individuals for an exemption from the prohibition in the Federal Motor Carrier Safety Regulations (FMCSRs) against persons with a clinical diagnosis of epilepsy or any other condition that is likely to cause a loss of consciousness or any loss of ability to control a commercial motor vehicle (CMV) to drive in interstate commerce. If granted, the exemptions would enable these individuals who have had one or more seizures and are taking anti-seizure medication to operate CMVs in interstate commerce.
Prevention of Alcohol Misuse and Prohibited Drug Use in Transit Operations
This notice announces the calendar year 2025 drug and alcohol random testing rates for specific recipients of FTA financial assistance. The minimum random drug testing rate will remain at 50 percent, and the random alcohol testing rate will remain at 10 percent.
Agency Information Collection Activity Under OMB Review: Generic Clearance for the Collection of Qualitative Feedback on Agency Service Delivery
In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Requirements (ICRs) abstracted below have been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describe the nature of the information collection and their expected burdens.
Notice of Proposed Agency Information Collection Activities; Modification of Existing Information Collection.
In accordance with the requirements of the Paperwork Reduction Act of 1995, the Department of Transportation (the Department) invites public comments on a request to the Office of Management and Budget (OMB) to approve modifications to a currently approved Information Collection Request (ICR). The forms have been updated to reflect efficiencies in the application process adopted by the Department, provide clarifying information, and make the forms easier for applicants to use. The general process of applying for credit assistance is not changing; applications are still accepted on a rolling basis. The ICR continues to be necessary for the Department to evaluate projects and project sponsors for credit program eligibility and creditworthiness as required by law.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the Information Collection Request (ICR) summarized below. Before submitting this ICR to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities identified in the ICR.
Airworthiness Directives; Safran Helicopter Engines, S.A. (Type Certificate Previously Held by Turbomeca S.A.)
The FAA is adopting a new airworthiness directive (AD) for all Safran Helicopter Engines, S.A. (Safran) Model ARRIUS 2F engines. This AD was prompted by a report of an uncommanded in-flight shut-down (IFSD) of a Safran Model ARRIUS 2F engine, followed by an investigation that revealed the IFSD was due to a missing lubricating and balancing groove on one of the bearings of the fuel control unit (FCU) fuel pump related to a non-conforming manufacturing process. This AD requires removal of the affected fuel pump from service and replacement with a serviceable part, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Control of Non-Volatile Particulate Matter From Aircraft Engines: Emission Standards and Test Procedures
This action confirms the effective date of the final rule published on April 24, 2024, and responds to the comments received on that final rule. The FAA published a correction on May 7, 2024, to the final rule that established a compliance date of 90 days after the effective date. The rule adopts standards for measuring non-volatile particulate matter (nvPM) exhaust emissions from aircraft engines. With this rulemaking, the FAA implemented the nvPM emissions standards adopted by the Environmental Protection Agency (EPA), allowing manufacturers to certificate engines to the new nvPM emissions standards in the United States, and fulfilling the statutory obligations of the FAA under the Clean Air Act.
Modification of Class D Airspace and Modification of Class E Airspace; Jack Northrop Field/Hawthorne Municipal Airport, Hawthorne, CA
This action proposes to modify the Class D airspace and Class E airspace designated as an extension to a Class D airspace at Jack Northrop Field/Hawthorne Municipal Airport, Hawthorne, CA. This action would more appropriately contain instrument flight rules (IFR) and visual flight rules (VFR) operations at the airport. Additionally, the airport's legal description would be amended to match the FAA's database.
Modification of Class D Airspace; Torrance Airport, Torrance, CA
This action proposes to modify the Class D airspace at Torrance Airport, Torrance, CA. This action would more appropriately contain instrument flight rules (IFR) and visual flight rules (VFR) operations at the airport. Additionally, the airport's name and legal description should be amended to match the FAA's database.
Modification of Class E Airspace; Alaska, AK
The FAA is withdrawing the NPRM published in the Federal Register on November 7, 2024, which proposed to modify Class E airspace extending upward from 1,200 feet above the surface within a designated landmass and within 12 miles from a designated coastline associated with the state of Alaska. Additionally, this action proposed administrative amendments to update the airspace's existing Class E airspace legal description. These actions were to support lower altitude instrument flight rules (IFR) operations and enhance safety for aircraft utilizing IFR and visual flight rules (VFR) operations.
New Car Assessment Program Final Decision Notice-Crashworthiness Pedestrian Protection
This final decision notice adds a crashworthiness pedestrian protection program to the New Car Assessment Program (NCAP) to evaluate new model year vehicles' abilities to mitigate pedestrian injuries. Based on its previous research, NHTSA concurs with and adopts most of the European New Car Assessment Programme's (Euro NCAP) pedestrian crashworthiness assessment methods, including the injury limits for test devices and the score calculation method used for impact points. NHTSA will identify new model year vehicles meeting a certain minimum safety threshold on the Agency's website and other published literature. This notice responds in part to the provisions in Section 24213 of the Infrastructure Investment and Jobs Act (IIJA), which requires NHTSA to incorporate measures in NCAP for evaluating the protection that new vehicles provide vulnerable road users like pedestrians.
Amendment of Class C Airspace; Austin, TX
This action amends the Austin-Bergstrom International Airport, TX, Class C airspace description by updating the airport reference point (ARP) geographic coordinates for the Austin-Bergstrom International Airport to match the FAA's National Airspace System Resource (NASR) database. Additionally, minor editorial changes are made to the airspace description header information format. This action does not change the boundaries, altitudes, or operating requirements of the Class C airspace area.
Emergency Temporary Closure of Eastbound Traffic on the National Network for the Lewis and Clark Viaduct Bridge in Kansas City, Kansas and Kansas City, Missouri
The Kansas Department of Transportation (KDOT) closed for repairs the eastbound portion of Interstate 70 (I-70) on the Lewis and Clark Viaduct Bridge over the Kansas River on September 5, 2024. Closure of the bridge and detour routes extend from Kansas City, Kansas, into Kansas City, Missouri. The FHWA is providing notice that KDOT is continuing the temporary closure of the Lewis and Clark Viaduct Bridge in the eastbound direction until the bridge can be repaired, which is estimated to be by the end of December 2024. The FHWA is requesting comments from the public on the alternate routes selected by KDOT and the Missouri Department of Transportation (MoDOT) due to the closure.
Updated Notice of Availability for the Port of Port Angeles Memorandum of Agreement Under Section 106 of the National Historic Preservation Act
The Maritime Administration (MARAD) is funding the Intermodal Handling and Transfer Facility Project (Project) which will improve the safety and efficiency of the movement and sorting of forest products through Port Angeles in Port Angeles, Washington. In accordance with the National Historic Preservation Act (NHPA) and its implementing regulations, MARAD has determined that a Memorandum of Agreement (Agreement) must be prepared in accordance with the requirements of the NHPA in conjunction with the Project and invites public comments on the Agreement.
Denial of Motor Vehicle Defect Petition, DP24-001
This notice sets forth the reasons for the denial of a defect petition, DP24-001, submitted by Ms. Jasmine Jewell (the Petitioner) to NHTSA (the Agency) by a letter dated February 2, 2024. The petition requests that the Agency initiate a safety defect investigation into the loss of motive power incidents attributed to 3.3L Lambda-II engines equipped in vehicles manufactured by Hyundai Motor America (Hyundai), which the Agency interpreted as addressing 3.3L Lambda-II engines on certain Model Year (MY) 2017 Santa Fe Models. After conducting a technical review of the petition and other information, the Agency concluded that the issues raised by the petition do not warrant a new defect investigation. Accordingly, the Agency denied the petition.
Safety Advisory 24-2 Street-Running Rail Vehicle Collisions
The Federal Transit Administration (FTA) has determined that street-running rail collisions are a risk to public transportation and is issuing Safety Advisory 24-2 to recommend actions to mitigate this risk.
Proposed Agency Information Collection Activities; Comment Request
Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, this notice announces that FRA is forwarding the Information Collection Request (ICR) summarized below to the Office of Management and Budget (OMB) for review and comment. The ICR describes the information collection and its expected burden. On August 5, 2024, FRA published a notice providing a 60-day period for public comment on the ICR. FRA received no comments in response to the notice.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC- 9-83 (MD-83), DC-9-87 (MD-87), and MD-88 airplanes, and Model DC-9-10, DC-9-20, DC-9-30, DC-9-40, and DC-9-50 series airplanes. This proposed AD was prompted by the discovery of jammed elevators during takeoff. This proposed AD would require revising the "Certificate Limitations" section of the existing airplane flight manual (AFM) to include a procedure to confirm elevator surfaces are not jammed in the trailing edge down (TED) position. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 787-8, 787-9, and 787-10 airplanes. This proposed AD was prompted by possible horizontal stabilizer pivot pin lockring, outer pivot pin, and outboard spacer misalignment at final assembly. This proposed AD would require inspection of the left-side and right-side horizontal stabilizer pivot pin assemblies for misalignment and incorrect gapping, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Unmanned Aircraft Systems (UAS) BEYOND and Partnership for Safety Plan (PSP) Programs
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 18, 2024. The collection involves operational data submissions by proponents who have been granted exemptions and operational data submissions by State, Local, Tribal, and Territorial (SLTT) participants in the UAS BEYOND program. The information to be collected will be used to inform FAA policy and decision-making regarding integrating UAS into the National Airspace System (NAS).
Agency Information Collection Activities: Requests for Comments; Clearance of a Renewed Approval of Information Collection: Renewal of AVIATOR (Automated Vacancy Information Access Tool for Online Referral) Customer Satisfaction Survey-Corrections
This is a correction to a notice that was published on November 14, 2024.The Docket Number in the initial submission was incorrect. It was published as "2120-0076". The correct Docket Number is 2021-0076.
Request for Comments on the Renewal of a Previously Approved Collection: Automated Mutual Assistance Vessel Rescue (AMVER) System
The Maritime Administration (MARAD) invites public comments on our intention to request the Office of Management and Budget (OMB) approval to renew an information collection in accordance with the Paperwork Reduction Act of 1995. The proposed collection OMB 2133-0025 Automated Mutual Assistance Vessel Rescue (AMVER) System is used to maintain a current plot of U.S.-Flag and U.S.-owned vessels. Since the last renewal, there was an increase in the total respondents to this collection, which has resulted in more responses and higher burden hours. There are no other changes to this collection. We are required to publish this notice in the Federal Register to obtain comments from the public and affected agencies.
Denial of Motor Vehicle Defect Petition
This notice sets forth the reasons for the denial of a petition submitted on June 7, 2023, by Kimberlyn Hearns (the petitioner) to NHTSA's Office of Defects Investigation (ODI). The petition requests that the Agency initiate an investigation into alleged remote attacks to the vehicle electrical control system associated with a variety of reported electrical malfunctions that render the petitioner's Model Year 2019 Toyota Yaris vehicle (subject vehicle) allegedly unusable. On August 30, 2023, NHTSA opened Defect Petition DP23-004 to evaluate the petitioner's request. After conducting a technical review of the petitioner's submissions, seeing no other complaints for 2019 Toyota Yaris vehicles related to the types of "remote attacks" described by the petitioner, and reviewing information provided by Toyota in response to an Agency request for information regarding the 2019 Yaris CAN bus, NHTSA has concluded that there is insufficient evidence to pursue further investigation. Accordingly, the Agency has denied the petition.
Notice of Solicitation for Nominations for Appointment to the Bessie Coleman Women in Aviation (BCWA) Advisory Committee
FAA is publishing this notice to solicit nominations for membership on the BCWA Advisory Committee.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPS) and associated Takeoff Minimums and Obstacle Departure procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Integration of Powered-Lift: Pilot Certification and Operations; Miscellaneous Amendments Related to Rotorcraft and Airplanes
This final rule adopts permanent amendments and a Special Federal Aviation Regulation (SFAR) for a period of ten years to: facilitate the certification of powered-lift pilots, clarify operating rules applicable to operations involving a powered-lift, and finalize other amendments which are necessary to integrate powered-lift into the National Airspace System (NAS). In this final action, the FAA finalizes its alternate framework to stand-up initial groups of powered-lift pilots and flight instructors. Most notably, the FAA adopts alternate frameworks to facilitate the certification of pilots seeking qualifications in a powered-lift with single functioning flight controls and a single pilot station. In response to commenters, the FAA provides clarification for certain operating rules and adopts a performance-based approach to certain operating rules to enable powered-lift operations. In addition to finalizing provisions for powered-lift, this action also makes changes to practical tests in aircraft that require type ratings, including airplanes and helicopters, training center rotorcraft instructor eligibility, training and testing requirements, and training center use of rotorcraft in flight training.
Broker and Freight Forwarder Financial Responsibility; Extension of Compliance Date
FMCSA is reopening the comment period for its November 4, 2024, NPRM, proposing to amend its November 16, 2023, final rule, "Broker and Freight Forwarder Financial Responsibility," by extending the compliance date for certain provisions from January 16, 2025, to January 16, 2026. FMCSA's forthcoming online registration system will be used to accept filings and track notifications, and this functionality will not be available in its legacy systems. As the new system is not expected to be available before January 16, 2025, FMCSA proposes to extend the compliance date to January 16, 2026, to provide regulated entities time to begin using and familiarizing themselves with the new system before compliance is required. The comment period is being reopened due to a request from the Small Business in Transportation Coalition.
Special Conditions: Gulfstream Aerospace Corporation, Model GVII-G400 Airplane; Installation of a Therapeutic Oxygen System for Medical Use
These special conditions are issued for the Gulfstream Aerospace Corporation (Gulfstream) Model GVII-G400 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is the installation of a therapeutic oxygen distribution system that provides a shared source of oxygen between the flightcrew and passengers. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Speed Measuring Device Conformity-RADAR
The National Highway Traffic Safety Administration (NHTSA) provides notice to the public that the Conforming Products List (CPL) maintained and updated by NHTSA for Down The Road (DTR) radar speed measuring devices will be discontinued. A new industry-based product Verification Program has been developed to confirm that DTR radar speed measuring devices conform to certain minimum specifications. The new industry-based product Verification Program will provide manufacturers the flexibility to confirm conformance with any testing entity as long as the entity can fulfill the requirements for testing and verifying device compliance with the established performance specifications, testing protocols and laboratory accreditation requirements of the industry-based Verification Program. To afford manufacturers time to transition to the new program, NHTSA will maintain the CPL for one year after the date of this notice. Under the new Verification Program, a DTR radar speed measuring device manufacturer can use an accredited testing entity to verify that its speed measuring device conforms to an established performance standard and will be placed on a verified products list maintained by the Verification Program. Please refer to the NIST website for a list of available Verification Programs: https://www.nist.gov/mml/mmsd/ security-technologies-group/down-road-dtr-radar. The new Verification Program will provide manufacturers with a proven method of demonstrating compliance to the minimum performance specifications, will empower end-users to make better purchasing decisions, and benefit manufacturers as products can quickly gain market acceptance. Accordingly, as of the date of this publication, NHTSA will no longer perform CPL processing under the Interim Administrative Guide for the Traffic Enforcement Technologies Program.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.