Department of Transportation January 20, 2022 – Federal Register Recent Federal Regulation Documents
Results 1 - 12 of 12
Airworthiness Directives; Schempp-Hirth Flugzeugbau GmbH Gliders
The FAA is adopting a new airworthiness directive (AD) for certain Schempp-Hirth Flugzeugbau GmbH Model Duo Discus and Duo Discus T gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as jerky extension of the air brakes at very high air speeds, including cases where the air brake blades interlock. This AD requires replacing certain air brake end stop bushings, inspecting certain other air brake end stops, and repairing if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
The FAA is superseding Airworthiness Directive (AD) 2020-12-06 for all Gulfstream Aerospace Corporation (Gulfstream) Model G-IV airplanes. AD 2020-12-06 required replacing the nose wheel steering servo valve manifold, incorporating revised operating procedures into the airplane flight manual (AFM), doing a records inspection for any incidents of un-commanded nose wheel steering turns, and reporting the results to the FAA. Since the FAA issued AD 2020-12-16, the FAA determined that a typographical error was made in citing one of the AFM documents. This AD retains the actions of AD 2020-12-06 and corrects the citation to the AFM. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Stemme AG Gliders
The FAA is adopting a new airworthiness directive (AD) for certain Stemme AG Model Stemme S 12 gliders. This AD was prompted by mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the incorrect installation of an axle connecting the main landing gear (MLG) to the center steel frame. This AD requires inspecting the MLG installation and repairing if necessary. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Helicopters Model EC130T2 helicopters. This proposed AD was prompted by the determination of a certain part needing a life limit and re-identification. This proposed AD would require re- identifying a certain part-numbered engine-to-main gearbox (engine-MGB) coupling shaft, and creating a log card or equivalent record, as specified in a European Union Aviation Safety Agency (EASA) AD, which is proposed for incorporation by reference (IBR). The FAA is proposing this AD to address the unsafe condition on these products.
Qualification of Drivers; Exemption Applications; Hearing
FMCSA announces its decision to renew exemptions for 17 individuals from the hearing requirement in the Federal Motor Carrier Safety Regulations (FMCSRs) for interstate commercial motor vehicle (CMV) drivers. The exemptions enable these hard of hearing and deaf individuals to continue to operate CMVs in interstate commerce.
Special Conditions: Dassault Aviation Model Falcon 6X Airplane; Design Roll Maneuver
These amended special conditions are issued for the Dassault Aviation (Dassault) Model Falcon 6X airplane. This airplane will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport- category airplanes. This design feature is electronic flight controls that affect maneuvering. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to deny applications from 33 individuals who requested an exemption from the vision standard in the Federal Motor Carrier Safety Regulations (FMCSRs) to operate a CMV in interstate commerce.
Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Waste Management Inc.
The Federal Motor Carrier Safety Administration (FMCSA) announces its decision to grant the limited 5-year exemption requested by Waste Management Inc. (Waste Management) to allow all of its operating companies, which currently number 106, to replace the high- mounted brake lights on their owned and operated fleets of heavy-duty refuse and support trucks with red or amber brake-activated pulsating lamps positioned in the upper center position, or in an upper dual outboard position, in addition to the steady burning brake lamps required by the Federal Motor Carrier Safety Regulations (FMCSRs). The Agency has determined that granting the exemption would likely achieve a level of safety equivalent to or greater than the level of safety provided by the regulation.
Parts and Accessories Necessary for Safe Operation; Application for an Exemption From Complete Innovations, Inc.
The FMCSA announces its decision to grant the application of Complete Innovations, Inc. (Complete Innovations) for a limited five- year exemption to allow its Vision 2.0 device to be mounted lower in the windshield on commercial motor vehicles (CMV) than is currently permitted. The Agency has determined that lower placement of the Complete Innovations Vision 2.0 device would not have an adverse impact on safety and that adherence to the terms and conditions of the exemption would likely achieve a level of safety equivalent to, or greater than, the level of safety provided by the regulation.
Petition for Exemption; Summary of Petition Received; Swift Air LLC
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Omni Air International
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Special Conditions: FedEx Express, Airbus Model A321-200 Airplanes; Installation of an Infrared Laser Countermeasure System
The FAA is withdrawing the Notice of Proposed Special Conditions that published in the Federal Register on January 18, 2022.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.