Department of Transportation November 2020 – Federal Register Recent Federal Regulation Documents

In compliance with the Paperwork Reduction Act of 1995, this notice announces that the Information Collection Request (ICR) abstracted below is being forwarded to the Office of Management and Budget (OMB) for review and comments. A Federal Register Notice with a 60-day comment period soliciting comments on the following information collection was published on August 27, 2020.

The Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirements of the coastwise trade laws to allow the carriage of no more than twelve passengers for hire on vessels, which are three years old or more. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

In accordance with the Paperwork Reduction Act of 1995, PHMSA invites comments on an Office of Management and Budget (OMB) control number pertaining to hazardous materials transportation. This notice follows the publication of a PHMSA final rule titled ``Hazardous Materials: Liquefied Natural Gas by Rail'' [HM-264, 85 FR 44994] authorizing the transportation of liquefied natural gas by rail. Following publication of this notice, PHMSA intends to request a renewal with change of currently approved OMB control number 2137-0612, ``Hazardous Materials Security Plans.''

This action withdraws the final rule published in the Federal Register on October 26, 2020. In that action, the FAA amends VHF Omnidirectional Range (VOR) Federal airways V-5 and V-178 in the vicinity of New Hope, KY, and removes V-513 in its entirety due to the planned decommissioning of the VOR portion of the New Hope, KY, VOR/ Distance Measuring Equipment (VOR/DME) navigation aid. The FAA has determined that withdrawal of the final rule is warranted since there has been a change in the date for the decommissioning of the New Hope, KY, VOR.

This action allows States to use the Indefinite Delivery and Indefinite Quantity (ID/IQ) method of contracting, including job order contracting (JOC), on Federal-aid highway projects, under certain circumstances, on a permanent basis.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on in the Federal Register on 14 July 2020. The collection involves a series of voluntary surveys within the aviation community. The information to be collected will be used to and/or is necessary because it will lead to improvements for safety within the National Airspace.

The FAA is correcting the airspace docket number listed in a notice of proposed rulemaking (NPRM) that published in the Federal Register of November 5, 2020. That NPRM proposing to amend VHF Omnidirectional Range (VOR) Federal airways V-67, V-190, and V-429; establish Area Navigation (RNAV) route T-312; and remove VOR Federal airways V-125 and V-335 in the vicinity of Marion, IL. This action reflects the correct airspace docket number.

This action proposes to modify the Class E airspace, designated as an extension to a Class D or Class E surface area, at General WM J Fox Airfield Airport. Additionally, this action proposes to establish Class E airspace, extending upward from 700 feet above the surface. Further, this action proposes to remove the Palmdale Airport, Palmdale VORTAC, and the Gen. William J. Fox NDB from the Class E4 legal description. Lastly, this action proposes several administrative corrections to the airspaces' legal descriptions. This action would ensure the safety and management of instrument flight rules (IFR) operations at the airport.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Rolls-Royce Deutschland Ltd. & Co KG (RRD) BR700-715A1-30, BR700-715B1-30, and BR700-715C1-30 model turbofan engines. This proposed AD was prompted by reports of HPT stage 1 blades failing in service due to sulphidation and subsequent crack initiation. This proposed AD would require removal and replacement of the HPT stage 1 blade and HPT stage 1 blade damper. The FAA is proposing this AD to address the unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations, notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on April 23, 2020. The collection involves a lienholder returning an AC Form 8050-41, Notice of RecordationAircraft Security Conveyance with Part IIRelease completed to the Civil Aviation Registry, Aircraft Registration Branch (Registry), to release a recorded lien. This information is necessary to show satisfaction of a recorded lien.

Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, this notice announces that FRA is forwarding the Information Collection Request (ICR) abstracted below to the Office of Management and Budget (OMB) for review and comment. The ICR describes the information collection and its expected burden. On August 24, 2020, FRA published a notice providing a 60-day period for public comment on the ICR.

The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235- 200, CN-235-300 airplanes and Model C-295 airplanes. This proposed AD was prompted by cracks found on certain left- and right-hand stringers in a certain area of the fuselage. This proposed AD would require repetitive inspections for cracking or broken rivets of certain left- and right-hand stringers and surrounding structure, and repair if necessary, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

In compliance with the Paperwork Reduction Act of 1995 (PRA), this notice announces that the Information Collection Request (ICR) abstracted below will be submitted to the Office of Management and Budget (OMB) for review. The ICR describes the nature of the information collection and its expected burden. The ICR is for a new information collection for a one-time voluntary survey regarding knowledge, attitudes, and behaviors associated with drowsy driving. A Federal Register notice with a 60-day comment period soliciting public comments on the following information collection was published on July 14, 2020. NHTSA received two comments, which we address below.

The FAA is adopting a new airworthiness directive (AD) for all Rolls-Royce Corporation (RRC) AE 2100A, AE 2100D2, AE 2100D2A, and AE 2100P model turboprop engines. This AD was prompted by a report of a propeller gearbox (PGB) development test conducted by the manufacturer, in which high vibration occurred due to a fatigue crack that initiated in the PGB shaft and carrier assembly. This AD requires assignment of usage hours to the PGB shaft and carrier assembly at the next engine shop visit and replacement of PGB shaft and carrier assemblies prior to exceeding the new life limits established by the manufacturer. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA proposes to supersede Airworthiness Directive (AD) 2018-19-01, which applies to all Airbus Helicopters Model AS-365N2, AS 365 N3, EC 155B, EC155B1, SA-365N1, and SA-366G1 helicopters. AD 2018- 19-01 requires repetitive inspections of the aft fuselage outer skin. Since the FAA issued AD 2018-19-01, it was determined that Model SA- 365N helicopters are also affected by the unsafe condition. This proposed AD would continue to require repetitive inspections and would add Model SA-365N helicopters, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.

This action revokes the Class E airspace extending upward from 700 feet above the surface at Lake Lawn Airport, Delavan, WI, due to the cancellation of the instrument procedures at that airport and the airspace no longer being required.

The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program submitted by the City of Burlington, Vermont under the provisions of Title I of the Aviation Safety and Noise Abatement Act of 1979. These findings are made in recognition of the description of federal and non-federal responsibilities in Senate Report No. 96-52 (1980). On October 14, 2020, the Airports Division Deputy Director approved the Burlington International Airport noise compatibility program. This supersedes the approval issued August 27, 2020. All of the proposed program elements were approved.

Daimler Coaches North America, LLC (DCNA), a subsidiary of Daimler AG, has determined that certain model year (MY) 2012-2019 Setra S407 and MY 2009-2020 Setra S417 buses do not fully comply with Federal Motor Vehicle Safety Standard (FMVSS) No. 101, Controls and Displays. DCNA filed a noncompliance report dated July 16, 2020. DCNA subsequently petitioned NHTSA on August 4, 2020, and later amended it on October 1, 2020, for a decision that the subject noncompliance is inconsequential as it relates to motor vehicle safety. This notice announces receipt of DCNA's petition.

The FAA is adopting a new airworthiness directive (AD) for certain Pilatus Aircraft Ltd. (Pilatus) Model PC-24 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as movement of the aft fuel pipe within the coupling, which can cause damage to the O-rings and lead to a fuel leak, fuel fire or explosion, and consequent loss of control of the airplane. This AD requires replacing and prohibits installing affected parts. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for all GE Aviation Czech s.r.o. (GEAC) M601D-11, M601E-11, M601E-11A, M601E- 11AS, M601E-11S, M601F, H75-200, H80-100, H80-200, and H85-200 model turboprop engines. This AD was prompted by reports of engine power fluctuations occurring during ground tests. This AD requires the removal and replacement of the fuel control unit (FCU). The FAA is issuing this AD to address the unsafe condition on these products.

This action proposes to amend the Class D airspace, Class E surface Airspace and Class E airspace extending upward from 700 feet above ground level (AGL) at Tacoma Narrows Airport, Tacoma, WA. A review of the airspace was initiated due to corresponding reviews at McChord Field (Joint Base Lewis-McChord) and Gray AAF (Joint Base Lewis-McChord). All three locations were evaluated at the same time due to their close proximity to one another and operational interdependence. After a review of the airspace, the FAA found it necessary to amend the existing airspace for the safety and management of Instrument Flight Rules (IFR) operations at this airport.

The FAA is superseding Airworthiness Directive (AD) 99-01-19 and AD 2004-25-02, which applied to certain Airbus SAS Model A320 series airplanes. AD 99-01-19 and AD 2004-25-02 required repetitive inspections to detect fatigue cracking in certain areas of the fuselage, and corrective action if necessary. AD 2004-25-02 also provided an optional terminating action for the repetitive inspections. This AD continues to require, for certain airplanes, repetitive inspections of the fastener holes for any cracking, and repair if necessary, and provides an optional terminating action for the fastener hole inspections. This AD also revises the applicability to include additional airplanes and requires, for all airplanes, inspections of the emergency exit door structure for any cracking and repair if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. This AD was prompted by a report that during full scale tests to support the Model A320 structure extended service goal (ESG) exercise, several cracks were found on both sides of the overwing emergency exit door cut-outs at fuselage section 15. The FAA is issuing this AD to address the unsafe condition on these products.