Department of Transportation 2016 – Federal Register Recent Federal Regulation Documents
Results 2,001 - 2,050 of 3,058
Notice of Final Federal Agency Actions on Transportation Project in Washington State
This notice announces actions taken by the FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to the I-5 interchange with NW., 319th Street/La Center Road (La Center Interchange Improvements) Project in the State of Washington. The action by FHWA is the Record of Decision (ROD) that selects improvements to the I-5 La Center Interchange as traffic mitigation measures for construction of the Cowlitz Reservation Development. The Cowlitz Reservation Development was the subject of the Bureau of Indian Affairs (BIA) ROD of April 2013. Actions by other Federal agencies include issuing amendments to previously issued permits.
Proposed Amendment of Class E Airspace for the Following Arkansas Towns; Blytheville, AR; Brinkley, AR; Clarksville, AR; and DeQueen, AR
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Arkansas International Airport, Blytheville, AR; Blytheville Municipal Airport, Blytheville, AR; Frank Federer Memorial Airport, Brinkley, AR; Clarksville Municipal Airport, Clarksville, AR; and J. Lynn Helms Sevier County Airport, De Queen, AR. Decommissioning of non-directional radio beacons (NDBs), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action would also update the name of Arkansas International Airport, and the geographic coordinates for Arkansas International Airport, Blytheville Municipal Airport, and Clarksville Municipal Airport, to coincide with the FAAs aeronautical database.
Proposed Amendment of Class E Airspace for the Following Indiana Towns; Goshen, IN; Greencastle, IN; Huntingburg, IN; North Vernon, IN; Rensselaer, IN; Tell City, IN; and Washington, IN; and Revocation of Class E Airspace; Vincennes, IN
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Vigil I. Grissom Municipal Airport, Bedford, IN; Goshen Municipal Airport, Goshen, IN; Putnam County Airport, Greencastle, IN; Huntingburg Airport, Huntingburg, IN; North Vernon Airport, North Vernon, IN; Jasper County Airport, Rensselaer, IN; Perry County Municipal Airport, Tell City, IN; and Daviess County Airport, Washington, IN. This action also proposes to remove Class E airspace extending upward from 700 feet above the surface at O'Neal Airport, Vincennes, IN. Decommissioning of non- directional radio beacons (NDB), cancellation of NDB approaches, implementation of area navigation (RNAV) procedures, and closure of O'Neal Airport, have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action also would update the geographic coordinates of Goshen Municipal Airport, Putnam County Airport, North Vernon Airport, Jasper County Airport, and Perry County Municipal Airport to coincide with the FAAs aeronautical database.
Proposed Revocation of Class E Airspace; Alliance, NE; and Amendment of Class E Airspace for the Following Nebraska Towns; Albion, NE; Alliance, NE; Gothenburg, NE; Holdrege, NE; Imperial, NE; Lexington, NE; and Millard Airport, Omaha, NE
This action proposes to remove Class E surface area airspace at Alliance Municipal Airport, Alliance, NE; and modify Class E airspace extending upward from 700 feet above the surface at Albion Municipal Airport, Albion, NE; Alliance Municipal Airport, Alliance, NE; Quinn Field, Gothenburg, NE; Brewster Field Airport, Holdrege, NE; Imperial Municipal Airport, Imperial, NE; Jim Kelly Field, Lexington, NE; and Millard Airport, Omaha, NE. Decommissioning of non-directional radio beacons (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action would also update the geographic coordinates for Quinn Field, Imperial Municipal Airport, and Jim Kelly Field to coincide with the FAA's aeronautical database.
Proposed Amendment of Class E Airspace for the Following Minnesota Towns; Hutchinson, MN; Jackson, MN; Pipestone, MN; Two Harbors, MN; and Waseca, MN
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Hutchinson Municipal Airport- Butler Field, Hutchinson, MN; Jackson Municipal Airport, Jackson, MN; Pipestone Municipal Airport, Pipestone, MN; Richard B. Helgeson Airport, Two Harbors, MN; and Waseca Municipal Airport, Waseca, MN. Decommissioning of the non-directional radio beacon (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action would also update the geographic coordinates at Hutchinson Municipal-Butler Field, Jackson Municipal Airport, Pipestone Municipal Airport, and Richard B. Helgeson Airport, to coincide with the FAAs aeronautical database.
Proposed Amendment of Class E Airspace for the following Michigan Towns; Alma, MI; Bellaire, MI; Cadillac, MI; Drummond Island, MI; Gladwin, MI; Holland, MI; and Three Rivers, MI
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Gratiot Community Airport, Alma, MI; Antrim County Airport, Bellaire, MI; Wexford County Airport, Cadillac, MI; Drummond Island Airport, Drummond Island, MI; Charles C. Zettel Memorial Airport, Gladwin, MI; Park Township Airport and West Michigan Regional Airport, Holland, MI; and Three Rivers Municipal Dr. Haines Airport, Three Rivers, MI. Decommissioning of non-directional radio beacons (NDB), cancellation of NDB approaches, or implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. This action would also update the geographic coordinates of Three Rivers Municipal Dr. Haines Airport, and the name change of West Michigan Regional Airport (formerly Tulip City Airport) to coincide with the FAAs aeronautical database.
Airworthiness Directives; Dassault Aviation Airplanes
We propose to supersede Airworthiness Directive (AD) 2008-19- 08, for all Dassault Aviation Model Falcon 10 airplanes. AD 2008-19-08 currently requires repetitive replacement of the flexible hoses installed in the wing (slat) anti-icing system with new hoses. Since we issued AD 2008-19-08, additional reports were received of collapse of the flexible hoses installed in the slat anti-icing systems on airplanes equipped with new, improved hoses. This proposed AD would require reducing the life limit of these flexible hoses, which would reduce the repetitive replacement intervals. We are proposing this AD to prevent collapse of the flexible hoses in the slat anti-icing system, which could lead to insufficient anti-icing capability and, if icing is encountered in this situation, could result in reduced controllability of the airplane.
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-400, 747-400D, and 747-400F series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. This proposed AD would also provide alternative actions for cargo airplanes. We are proposing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. This proposed AD would also provide alternative actions for cargo airplanes. We are proposing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300- 600 series airplanes), and Model A310 series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. This proposed AD would also provide alternative actions for cargo airplanes. We are proposing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; Airbus Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318, A319, and A320 series airplanes; Model A330- 200, -200 Freighter, and -300 series airplanes; and Model A340-200, - 300, -500, and -600 series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. This proposed AD would also provide alternative actions for cargo airplanes. We are proposing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Nondiscrimination on the Basis of Disability in Air Travel: Negotiated Rulemaking Committee Membership and First Meeting
The Department of Transportation (``Department'' or ``DOT'') announces the appointment of members to the Advisory Committee on Accessible Air Transportation (ACCESS Advisory Committee). The ACCESS Advisory Committee was established to negotiate and develop a proposed rule concerning accommodations for air travelers with disabilities addressing inflight entertainment (IFE), accessible lavatory on new single-aisle aircraft, and service animals. Additionally, DOT announces that the first meeting of the ACCESS Advisory Committee will be held on May 17 and 18, 2016. The meeting is open to the public for its entirety.
Environmental Impact Statement (EIS) for the Hudson Tunnel Project in Hudson County, New Jersey and New York County, New York
Through this Notice, FRA announces its intent to jointly prepare an environmental impact statement (EIS) with the New Jersey Transit Corporation (NJ TRANSIT) for the Hudson Tunnel Project (the Proposed Action or the Project) under the National Environmental Policy Act (NEPA). The Proposed Action is intended to preserve the current functionality of the Northeast Corridor's (NEC) Hudson River rail crossing between New Jersey and New York and strengthen the resilience of the NEC. The Project would consist of construction of a new rail tunnel beneath the Hudson River, including railroad infrastructure in New Jersey and New York connecting the new rail tunnel to the existing NEC, and rehabilitation of the existing NEC tunnel beneath the Hudson River, referred to as the North River Tunnel. The EIS will evaluate the potential environmental impacts of a reasonable range of alternatives, including the No Action (No Build) Alternative. As appropriate, FRA and NJ TRANSIT will coordinate with the National Railroad Passenger Corporation (Amtrak), as owner of the North River Tunnel, and the Port Authority of New York and New Jersey (PANYNJ) on the EIS. FRA invites the public and all interested parties to provide comments on the scope of the EIS, including the proposed purpose and need, the Proposed Action and alternatives to be considered in the EIS, potential environmental impacts of concern and methodologies to be used in the EIS, the approach for public and agency involvement, and any other particular concerns about the potential impacts of the Proposed Action.
Buy America Waiver Notification
This notice provides information regarding FHWA's finding that a Buy America waiver is appropriate for the use of non-domestic motor and machinery brakes for Southern Boulevard (SR 80) Bascule Bridge Replacement project that meet AASHTO Moveable Highway Bridge Design specifications (MHBDS) 5.5, 5.6, 6.7.13 in the State of Florida.
Reports, Forms and Record Keeping Requirements, Agency Information Collection Activity Under OMB Review
Before a federal agency may collect certain information from the public, the agency must receive approval from the Office of Management and Budget (``OMB''). Under procedures established by the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), before seeking OMB approval, federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatements of previously approved collections. In compliance with the Paperwork Reduction Act of 1995, this notice describes one collection of information for which NHTSA intends to seek OMB approval.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces receipt of applications from 21 individuals for exemption from the vision requirement in the Federal Motor Carrier Safety Regulations. They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. If granted, the exemptions would enable these individuals to qualify as drivers of commercial motor vehicles (CMVs) in interstate commerce.
Notice and Request for Comments
As required by the Paperwork Reduction Act of 1995, 44 U.S.C. 3501-3521 (PRA), the Surface Transportation Board (STB or Board) gives notice of its intent to seek approval from the Office of Management and Budget (OMB) for an extension of the Rail Depreciation Studies. This information collection is described in detail below. Comments are requested concerning: (1) The accuracy of the Board's burden estimates; (2) ways to enhance the quality, utility, and clarity of the information collected; (3) ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology, when appropriate; and (4) whether the collection of information is necessary for the proper performance of the functions of the Board, including whether the collection has practical utility. Submitted comments will be summarized and included in the Board's request for OMB approval.
Notice and Request for Comments
As required by the Paperwork Reduction Act of 1995, 44 U.S.C. 3501-3521 (PRA), the Surface Transportation Board (STB or Board) gives notice of its intent to seek approval from the Office of Management and Budget (OMB) for an extension of the process for filing Arbitration Option Notices. This information collection is described in detail below. Comments are requested concerning: (1) The accuracy of the Board's burden estimates; (2) ways to enhance the quality, utility, and clarity of the information collected; (3) ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology, when appropriate; and (4) whether the collection of information is necessary for the proper performance of the functions of the Board, including whether the collection has practical utility. Submitted comments will be summarized and included in the Board's request for OMB approval.
Notice and Request for Comments
As required by the Paperwork Reduction Act of 1995, 44 U.S.C. 3501-3521 (PRA), the Surface Transportation Board (STB or Board) gives notice of its intent to seek approval from the Office of Management and Budget (OMB) for an extension of the system diagram maps, described below. Comments are requested concerning: (1) The accuracy of the Board's burden estimates; (2) ways to enhance the quality, utility, and clarity of the information collected; (3) ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology, when appropriate; and (4) whether the collection of information is necessary for the proper performance of the functions of the Board, including whether the collection has practical utility. Submitted comments will be summarized and included in the Board's request for OMB approval.
Notice and Request for Comments
As required by the Paperwork Reduction Act of 1995, 44 U.S.C. 3501-3521 (PRA), the Surface Transportation Board (STB or Board) gives notice of its intent to seek from the Office of Management and Budget (OMB) an extension of the information collections required under 49 U.S.C. 11301 and 49 CFR 1177 (rail or water carrier equipment liens (recordations)), under 49 U.S.C. 13702(b) and 49 CFR 1312 (water carrier tariffs), and under 49 U.S.C. 10709(d) and 49 CFR 1313 (rail agricultural contract summaries). The information collections are described in more detail below. Comments are requested concerning: (1) The accuracy of the Board's burden estimates; (2) ways to enhance the quality, utility, and clarity of the information collected; (3) ways to minimize the burden of the collection of information on the respondents, including the use of automated collection techniques or other forms of information technology when appropriate; and (4) whether the collection of information is necessary for the proper performance of the functions of the Board, including whether the collection has practical utility. Submitted comments will be summarized and included in the Board's request for OMB approval.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A318-111 and -112 airplanes; Model A319-111, -112, -113, - 114, and -115 airplanes; Model A320-211, -212, and -214 airplanes; and Model A321-111, -112, -211, -212, and -213 airplanes. This AD was prompted by the results of an evaluation by the design approval holder (DAH). During a residual fatigue test, the forward engine mount failed prior to reaching the threshold/interval for the detailed inspections of the forward engine mounts specified in the airworthiness limitations. This AD requires repetitive detailed inspections of the right and left forward engine mounts, and corrective action if necessary. These inspections are required by AD 2015-05-02. This AD reduces the compliance times for those inspections. We are issuing this AD to detect and correct fatigue cracking in the forward engine mounts. Such cracking could result in reduced structural integrity of the airplane and could lead to in-flight loss of an engine, possibly resulting in reduced controllability of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This proposed AD was prompted by a malfunctioning No. 2 engine intake heater with corrosion on the thermostats and the fuselage skin where the thermostats made contact with the aircraft fuselage skin. This proposed AD would require a general visual inspection for corrosion of the thermostats' mounting surfaces and fuselage skin surface, corrective actions if necessary, and relocating the existing thermostats. We are proposing this AD to prevent corrosion within the thermostats that may cause the switch mechanism to seize in the open position and prevent the activation of the associated engine air intake heater. An inactive engine air intake heater could lead to an engine failure.
Proposed Amendment of Class D Airspace and Revocation of Class E Airspace; Columbus, Ohio State University Airport, OH, and Amendment of Class E Airspace; Columbus, OH
This action withdraws the NPRM published in the Federal Register on June 24, 2015, proposing to amend Class D and Class E airspace and remove Class E airspace in the Columbus, OH, area. The FAA has determined that withdrawal of that NPRM is warranted as a second NPRM for the same airspace action was issued in July 2015.
Airworthiness Directives; Dassault Aviation Airplanes
We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 2000, FALCON 2000EX, MYSTERE-FALCON 900, and FALCON 900EX airplanes. This AD was prompted by reports of a co- pilot sliding aft on his seat during take-off at rotation. This AD requires replacement of certain springs installed on the pilot and co- pilot seats. We are issuing this AD to prevent fatigue wear, which, if not corrected, could cause the seat to slide and the pilot or co-pilot to lose contact with the controls, leading to an inadvertent input on the flight control commands during take-off or climb, possibly resulting in loss of control of the airplane.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This AD was prompted by the discovery of a number of incorrectly calibrated angle of attack (AOA) transducers installed in the stall protection system. This AD requires replacement of incorrectly calibrated AOA transducers. We are issuing this AD to detect and replace incorrectly calibrated AOA transducers; incorrect calibration of the transducers could result in late activation of the stick pusher.
Airworthiness Directives; The Boeing Company Airplanes
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200 and -300 series airplanes. This AD was prompted by reports of fatigue cracking of a certain chord of the pivot bulkhead. This AD requires repetitive inspections for cracking of the left side and right side forward outer chords of the pivot bulkhead, and related investigative and corrective actions if necessary. This AD also provides a modification of the pivot bulkhead, which would terminate the repetitive inspections. We are issuing this AD to detect and correct fatigue cracking of the outer flanges of the left and right side forward outer chords of the pivot bulkhead, which could result in a severed forward outer chord and consequent loss of horizontal stabilizer control.
Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes
We are adopting a new airworthiness directive (AD) for certain Mitsubishi Heavy Industries, Ltd. Models MU-2B-30, MU-2B-35, MU-2B-36, MU-2B-36A, and MU-2B-60 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as reports of cracks found in the attach fittings of the main landing gear oleo strut. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
We are adopting a new airworthiness directive (AD) for certain Piper Aircraft, Inc. Model PA-31-350 airplanes. This AD was prompted by a report of an engine fire caused by a leak in the fuel pump inlet hose. This AD requires inspecting the fuel hose assembly and the turbocharger support assembly for proper clearance between them, inspecting each assembly for any sign of damage, and making any necessary repairs or replacements. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France)
We are superseding airworthiness directive (AD) 2014-12-51 for Airbus Helicopters (previously Eurocopter France) Model EC130B4 and EC130T2 helicopters. AD 2014-12-51 required repetitively inspecting the tailboom to Fenestron junction frame (junction frame) for a crack. This new AD retains the requirements of AD 2014-12-51, changes the applicability from helicopters with certain hours time-in-service (TIS) to junction frames with certain hours TIS, and adds a compliance time for sling cycles to the junction frame inspection interval. The actions of this AD are intended to detect a crack and to prevent failure of the junction frame, which could result in loss of the Fenestron and subsequent loss of control of the helicopter.
Airworthiness Directives; Airbus Airplanes
We are adopting a new airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This AD was prompted by reports of in-flight loss of fixed and hinged main landing gear (MLG) fairings, and reports of post-modification MLG fixed fairing assemblies that have wear and corrosion. This AD requires, for certain airplanes, repetitive replacements of the fixed fairing upper and lower attachment studs of both left-hand (LH) and the right-hand (RH) MLG; and repetitive inspections for corrosion, wear, fatigue cracking, and loose studs of each forward stud assembly of the fixed fairing door upper and lower forward attachment of both LH and RH MLG; and replacement if necessary. This AD also provides an optional terminating modification for the repetitive replacements of the fixed fairing upper and lower attachment studs. We are issuing this AD to prevent in-flight detachment of an MLG fixed fairing and consequent damage to the airplane.
Airworthiness Directives; DG Flugzeugbau GmbH Gliders
We are revising Airworthiness Directive (AD) 2015-09-04 for DG Flugzeugbau GmbH Model DG-1000T gliders equipped with a Solo Kleinmotoren Model 2350 C engine. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as engine shaft failure and consequent propeller detachment. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc. Airplanes
We are superseding Airworthiness Directive (AD) 2014-17-51 for certain Bombardier, Inc. Model CL-600-2B16 airplanes. AD 2014-17-51 required inspecting the inboard flap fasteners of the hinge-box forward fitting at Wing Station (WS) 76.50 and WS 127.25 to determine the orientation and condition of the fasteners, as applicable, and replacement or repetitive inspections of the fasteners if necessary. AD 2014-17-51 also provided for optional terminating action for the requirements of that AD. This new AD requires accomplishment of the previously optional terminating action. This AD was prompted by a determination that that additional action is necessary. We are issuing this AD to detect and correct incorrectly oriented or fractured fasteners, that could result in premature failure of the fasteners attaching the inboard flap hinge-box forward fitting; failure of the fasteners could lead to the detachment of the flap hinge box and the flap surface, and consequent loss of control of the airplane.
Railroad Safety Infrastructure Improvement Grants
This Notice of Funding Opportunity (NOFO or notice) details the application requirements and procedures for obtaining grant funding for eligible projects under the Railroad Safety Infrastructure Improvement Grant program. The opportunities described in this notice are available under Catalog of Federal Domestic Assistance (CFDA) number 20.301, ``Rail Safety Grants.''
Notice and Request for Comments
The Department of Transportation (DOT) invites public comments about our intention to request the Office of Management and Budget (OMB) approval for a new information collection. The John A. Volpe National Transportation Systems Center (Volpe Center), U.S. DOT, will conduct this study under an interagency agreement with NHTSA. The collection involves case study interviews with law enforcement agency personnel pertaining to their knowledge and practice in using automated license plate readers (ALPR) for traffic safety purposes. The information to be collected will be used to document the state of knowledge and practice in using ALPR for this purpose under the National Cooperative Research and Evaluation Program (NCREP), which is managed jointly by NHTSA and the Governors Highway Safety Association (GHSA). Before a Federal agency can collect certain information from the public, it must receive approval from OMB. Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections.
Hazardous Materials: Incorporation by Reference Edition Update for the American Society of Mechanical Engineers Boiler and Pressure Vessel Code and Transportation Systems for Liquids and Slurries: Pressure Piping Code
This direct final rule incorporates by reference the most recent editions of the ASME Boiler and Pressure Vessel Code. The purpose of this update is to enable non-specification (nurse tank) manufacturers and other DOT and UN specification packaging manufacturers to utilize current technology, materials, and practices to help maintain a high level of safety. PHMSA is replacing the ASME referenced standard (1998 Edition) with the new, current ASME standard (2015 Edition) for boiler and pressure vessels. PHMSA is also replacing the ASME 1998 Edition referenced standard of ASME's Transportation Systems for Liquids and Slurries: Pressure Piping to the current 2012 Edition.
Establishment of Class E Airspace; Hollis, OK
This action establishes Class E airspace extending upward from 700 feet above the surface at Hollis Municipal Airport, Hollis, OK, to accommodate new Standard Instrument Approach Procedures for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Establishment of Class E Airspace; Ketchum, OK
This action establishes Class E airspace extending upward from 700 feet above the surface at South Grand Lake Regional Airport, Ketchum, OK, to accommodate new Standard Instrument Approach Procedures for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Establishment of Class E Airspace; Horseshoe Bend, AR
This action establishes Class E airspace extending upward from 700 feet above the surface at Horseshoe Bend Airport, Horseshoe Bend, AR, to accommodate new Standard Instrument Approach Procedures for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Airworthiness Directives; Airbus Helicopters (Type Certificate Previously Held by Eurocopter France)
We propose to supersede airworthiness directive (AD) 2013-15- 03 for Eurocopter France Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, AS350D, and AS350D1 helicopters with a single hydraulic system and a certain hydraulic pump drive assembly installed. AD 2013-15-03 requires inspecting the hydraulic pump drive bearing (bearing) for leaks, rust, overheating, and condition. This proposed AD would add a requirement to grease the bearing and inspect for bronze particles in the grease, as well as change the inspection and inspection intervals of the bearing until it is replaced with an improved bearing. These proposed actions are intended to prevent hydraulic pump drive belt failure, loss of hydraulic servo assistance, and subsequent loss of helicopter control.
Hazardous Materials: Incorporation of ASME Code Section XII and the National Board Inspection Code
This SNPRM proposes to incorporate and allow the use of the 2015 edition of the American Society of Mechanical Engineers (ASME) Boiler and Pressure Vessel Code, Section XIIRules for Construction and Continued Service of Transport Tanks for the construction and continued service of cargo tank motor vehicles (CTMVs), cryogenic portable tanks, and multi-unit tank car tanks (``ton tanks''). The PHMSA also proposes to incorporate and authorize the use of the 2015 edition of the National Board of Boiler and Pressure Vessel Inspectors National Board Inspection Code, in our regulations as it applies to the continued service of CTMVs, cryogenic portable tanks, and ton tanks constructed to ASME Section XII standards, as well as for existing CTMVs constructed in accordance with the current hazardous materials regulations. If adopted, these amendments will allow for flexibility regarding selection of authorized packaging, in addition to qualification and maintenance for continued service of the packaging, without compromising safety.
Research, Engineering and Development Advisory Committee Meeting
The FAA is issuing this notice to advise the public of the Research, Engineering & Development Advisory Committee meeting.
Reduction of Remote Communications Outlets Used by Flight Service Stations in the Conterminous United States
The FAA is proposing to reduce the number of radio frequencies used by flight service stations to communicate with aircraft in flight. Under the proposal, six hundred and sixty-six (666) remote communications outlets (RCOs) will be decommissioned. Frequencies especially designated for emergency or military use are not included in this proposal. Frequencies in the state of Alaska are also not included in this proposal.
Agency Information Collection Activities: Request for Comments for a New Information Collection
The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval for a new information collection, which is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.
Evaluation of Safety Sensitive Personnel for Moderate-to-Severe Obstructive Sleep Apnea; Public Listening Sessions
FMCSA and FRA announce three public listening sessions on May 12, 17, and 25, 2016, to solicit information on the prevalence of moderate-to-severe obstructive sleep apnea (OSA) among individuals occupying safety sensitive positions in highway and rail transportation, and of its potential consequences for the safety of rail and highway transportation. FMCSA and FRA (collectively ``the Agencies'') also request information on potential costs and benefits from possible regulatory actions that address the safety risks associated with motor carrier and rail transportation workers in safety sensitive positions who have OSA. The listening sessions will provide interested parties an opportunity to share their views and any data or analysis on this topic with representatives of both Agencies. The Agencies will transcribe all comments and place the transcripts in the dockets referenced above for the Agencies' consideration. The Agencies will webcast the entire proceedings of all three meetings.
Qualification of Drivers; Exemption Applications; Diabetes Mellitus
FMCSA announces receipt of applications from 47 individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate CMVs in interstate commerce.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.