Department of Transportation September 2016 – Federal Register Recent Federal Regulation Documents

We are adopting a new airworthiness directive (AD) for all General Electric Company (GE) GE90-76B, GE90-77B, GE90-85B, GE90-90B, and GE90-94B turbofan engines with high-pressure compressor (HPC) stage 8-10 spool, part numbers (P/Ns) 1694M80G04, 1844M90G01, or 1844M90G02, installed. This AD was prompted by reports of cracks found on the seal teeth of the HPC stage 8-10 spool. This AD requires eddy current inspections (ECIs) or fluorescent penetrant inspections (FPIs) of the HPC stage 8-10 spool seal teeth and removing from service those parts that fail inspection. We are issuing this AD to prevent failure of the HPC stage 8-10 spool, uncontained rotor release, damage to the engine, and damage to the airplane.

On June 24, 2016, New England Transrail, LLC (NET) filed a petition for exemption with the Surface Transportation Board (Board) pursuant to 49 U.S.C. 10502 and 10901 in Docket No. FD 34797 (Sub-No. 1). NET intends to acquire, construct and operate various rail lines and construct and operate transloading facilities, where goods and materials are transferred from rail to truck, in the towns of Wilmington and Woburn, Massachusetts. NET proposes to acquire 5,727 feet of existing track, to rehabilitate or construct a combined 10,838 feet of track, and to operate as a rail carrier over the total 16,565 feet of track on and adjacent to property currently owned by the Olin Corporation at 51 Eames Street in Wilmington.\1\ NET anticipates moving goods and materials (e.g. bricks, newspaper, steel, glycols, biofuels, liquid natural gas, vegetable oils, wood chips, sand, and gravel) and transloading them from rail cars directly onto trucks, into holding tanks, or into a warehouse on site for temporary storage.

FMCSA announces receipt of applications from 39 individuals for exemption from the prohibition against persons with insulin-treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate CMVs in interstate commerce.

FMCSA confirms its decision to exempt 46 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.

The FHWA, on behalf of Caltrans, is issuing this notice to announce actions taken by Caltrans, that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed highway project, located on Interstate 80 between post miles 1.9 to 6.1 and on State Route 65 between post miles R4.8 to R7.3 in the County of Placer, State of California. Those actions grant licenses, permits, and approvals for the project.

These special conditions are issued for the installation of an inflatable four-point restraint safety belt with an integrated airbag device at the pilot and copilot seats on the DAHER-SOCATA, Model TBM 700 airplane. These airplanes, as modified by the installation of these inflatable safety belts, will have novel and unusual design features associated with the upper-torso restraint portions of the four-point safety belts, which contain an integrated airbag device. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for Bell Model 427 and Model 429 helicopters. This AD requires replacing certain engine and transmission oil check valves. This AD also prohibits installing the affected check valves on any helicopter. This AD is prompted by a report of several cracked or leaking check valves. These actions are intended to detect and prevent a cracked or leaking check valve which could result in loss of lubrication to the engine or transmission, failure of the engine or transmission, and subsequent loss of control of the helicopter.

The FHWA is issuing this notice to advise the public that an environmental impact statement will be prepared for a proposed highway project in Hartford County, Connecticut.

Under this notice, the FAA announces the submission deadline of October 6, 2016, for summer 2017 flight schedules at Chicago O'Hare International Airport (ORD), John F. Kennedy International Airport (JFK), Los Angeles International Airport (LAX), Newark Liberty International Airport (EWR), and San Francisco International Airport (SFO), in accordance with the International Air Transport Association (IATA) Worldwide Slot Guidelines (WSG). The deadline coincides with the schedule submission deadline for the IATA Slot Conference for the summer 2017 scheduling season.

The Federal Transit Administration (FTA) is requesting proposals from qualified institutions of higher education to conduct testing, evaluation, and analysis of low or no emission components intended for use in low or no emission transit buses used to provide public transportation. FTA is authorized to pay 50 percent of the established assessment fees, up to $3.0 million annually. A total of $15.0 million is authorized at $3.0 million per year starting in FY 2016 through FY2020 to carry out the Low and No Emission Component Assessment Program (LoNo-CAP). Funds awarded under the LoNo-CAP program will be used to reimburse the cost of assessing eligible components.

We are adopting a new airworthiness directive (AD) for all Gulfstream Aerospace Corporation Model G-1159, G-1159A, G-1159B, and G- IV airplanes. This AD requires revision of the maintenance or inspection program to establish the life limit of all elevator assemblies and skins on affected airplanes. This AD was prompted by the need to establish life limits for certain elevator assemblies and skins. We are issuing this AD to prevent failure of the elevator assembly and consequent loss of control of the airplane.

We propose to adopt a new airworthiness directive (AD) for all Airbus Defense and Space S.A. (formerly known as Construcciones Aeronauticas, S.A.) Model CN-235, CN 235-100, CN 235-200, and CN 235- 300 airplanes. This proposed AD was prompted by reports of cracks in certain areas of the rear fuselage. This proposed AD would require repetitive borescope and detailed visual inspections of the rear fuselage lateral beam and its external area and repair if necessary. We are proposing this AD to detect and correct cracks in the rear fuselage lateral beam and its external area; such cracking could lead to failure of the affected components, and result in reduced structural integrity of the fuselage.

In this rulemaking action, NHTSA is finalizing procedures for obtaining an exemption from the vehicle theft prevention standard for vehicles equipped with immobilizers. An immobilizer is an anti-theft device that combines microchip and transponder technology with engine and fuel immobilizer components that can prevent vehicles from starting unless a verified code is received by the transponder. This final rule streamlines the exemption procedure for immobilizer-equipped vehicles by adding performance criteria for immobilizers. The criteria, which roughly correlate with the types of qualities for which petitioners have been submitting testing and technical design details under existing procedures, closely follow the immobilizer performance requirements in the anti-theft standard of Canada. After this final rule, it would be sufficient for a manufacturer seeking the exemption of some of its vehicles to provide data showing that the device meets the performance criteria, as well as a statement that the device is durable and reliable. Adopting these performance criteria for immobilizers bring the U.S. anti-theft requirements more into line with those of Canada.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Flight Operational Quality Assurance (FOQA) is a program for the routine collection and analysis of digital flight data from airline operations, including but not limited to digital flight data currently collected pursuant to existing regulatory provisions. The FAA requires certificate holders who voluntarily establish approved FOQA programs to periodically provide aggregate trend analysis information from such programs to the FAA.

FMCSA announces that it has denied an application for exemption from the requirement that third-party commercial driver's license (CDL) testers maintain a bond in an amount determined by the State that employs them. The bond is intended to be sufficient to pay for re-testing drivers in the event that the third party or its examiners is involved in fraudulent activities related to CDL skills testing. The Division of Motor Vehicles, Idaho Transportation Department (ITD) submitted the application for exemption. FMCSA published ITD's application, reviewed the public comments received, and denied the application because available information did not allow the Agency to conclude that the proposed exemption would achieve a level of safety that is equivalent to, or greater than, the level of safety that would be obtained absent the exemption.

FMCSA announces its decision to exempt 37 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs). They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these CMV drivers.

FMCSA announces its decision to exempt 25 individuals from the vision requirement in the Federal Motor Carrier Safety Regulations (FMCSRs). They are unable to meet the vision requirement in one eye for various reasons. The exemptions will enable these individuals to operate commercial motor vehicles (CMVs) in interstate commerce without meeting the prescribed vision requirement in one eye. The Agency has concluded that granting these exemptions will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these CMV drivers.

The Federal Motor Carrier Safety Administration (FMCSA) requests public comment on an application for exemption from the International Institute of Towing and Recovery (IITR) (on behalf of the Towing and Recovery Association of America (TRAA) and the towing and recovery industry) to allow commercial motor vehicle operators to secure automobiles, light trucks, and vans using a total of four tiedownstwo fixed and two adjustableinstead of using a minimum of two tiedowns, both of which need to be adjustable. While the Federal Motor Carrier Safety Regulations (FMCSRs) require each tiedown, or its associated connectors or attachment mechanisms, to be adjustable, IITR believes that the use of four tiedowns instead of the two that are minimally required by the FMCSRs to secure automobiles, light trucks, and vans will maintain a level of safety that is equivalent to, or greater than, the level of safety achieved without the exemption even though two of the four tiedowns are not adjustable. IITR is requesting the temporary exemption in advance of petitioning FMCSA to conduct a rulemaking to amend 49 CFR 393.112.

FMCSA confirms its decision to exempt 47 individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions enable these individuals to operate CMVs in interstate commerce.

This notice provides Emergency Restriction/Prohibition Order No. FAA-2016-9156, issued September 16, 2016 to Braille Battery, Inc. The Emergency Order prohibits Braille Battery from offering for transportation and transporting, any lithium ion battery that is not in compliance with the HMR or the International Civil Aviation Organization (ICAO) Technical Instructions as permitted in the HMR; requires Braille Battery to maintain and make publicly available the complete test record issued by the testing facility for each lithium ion battery manufactured by Braille Battery proven to meet the criteria in part III, sub-section 38.3 of the UN Manual of Tests and Criteria; requires Braille Battery to notify third party vendors that may offer for transportation, or transport, via air any lithium ion battery manufactured by Braille Battery that the third party vendor should not offer for transportation, nor transport, via air a Braille Battery lithium ion battery until Braille Battery confirms that the lithium ion battery is of a design type proven to meet the criteria in part III, sub-section 38.3 of the UN Manual of Tests and Criteria; prohibits Braille from using any ``hazmat employee'' that has not received training in accordance with the HMR; and prohibits Braille Battery from offering for transportation, or transporting, by air any hazardous materials requiring a DOT specification or UN standard packaging unless Braille Battery follows the applicable packing and closure instructions.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 767-200, -300, and -400ER series airplanes. This proposed AD was prompted an evaluation by the design approval holder (DAH) indicating that the fuselage skin lap splices are subject to widespread fatigue damage (WFD). This proposed AD would require repetitive inspections to detect any crack in the fuselage skin at the skin lap splices. We are proposing this AD to detect and correct cracks at the fuselage skin lap splice, which can rapidly link up, possibly resulting in rapid decompression and loss of structural integrity of the airplane.

We are adopting a new airworthiness directive (AD) for certain REIMS AVIATION S.A. Model F406 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks found in the horizontal stabilizer rear attach structure and the vertical fin rear spar attach structure. We are issuing this AD to prevent structural failure of the horizontal stabilizer and/or the vertical fin rear spar attach structure, which could result in damage to the airplane and loss of control.