Department of Transportation June 21, 2016 – Federal Register Recent Federal Regulation Documents

In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for review and approval. The FMCSA and the public use the information (which is currently being collected) to verify that a motor carrier of property or passengers has obtained, and has in effect, the required minimum levels of financial responsibility. Statute mandates that motor carriers maintain proof of the required financial responsibility at their principal places of business, available upon request of an FMCSA safety investigator during compliance reviews. Insurance Endorsements and Surety Bonds are considered public information and must be produced by a motor carrier of passengers for review upon reasonable request by a member of the public.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

This action amends the Order Limiting Operations at John F. Kennedy International Airport (JFK) published on January 18, 2008, as amended, and most recently extended on May 24, 2016. This action replaces an obsolete statement concerning the Order's expiration date with the correct expiration date of October 27, 2018. The Order remains effective until October 27, 2018.

The FAA is issuing this notice to advise the public of a meeting of the ARAC.

FRA is issuing this notice to advise the public it intends to grant the City of Sacramento, California, Department of Public Works (Sacramento), a waiver from FRA's Buy America requirement to use Walton Cirrus Original Brown #3665 (Brown Marmoleum), in the Sacramento Valley Station Phase II intermodal project.

We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A330-200, -200 Freighter, and -300 series airplanes; and Model A340-500 and -600 series airplanes. This proposed AD was prompted by a quality control review on the final assembly line, which determined that the wrong aluminum alloy was used to manufacture several structural parts. This proposed AD would require a one-time eddy current conductivity measurement of certain cabin and cargo compartment structural parts to determine if an incorrect aluminum alloy was used, and replacement of any affected part with a serviceable part. We are proposing this AD to detect and replace structural parts made of incorrect aluminum alloy. This condition could result in reduced structural integrity of the airplane.

This action proposes to amend Class E airspace at Glasgow, KY as the Beaver Creek Non-Directional Beacon (NDB) has been decommissioned, requiring airspace reconfiguration at Glasgow Municipal Airport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport.

This action proposes to amend Class E airspace designated as an extension at Cape Cod Coast Guard Air Station, (formerly Otis ANGB), Falmouth, MA, as the Otis TACAN has been decommissioned, requiring airspace reconfiguration. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations at the airport. This action also would update the geographic coordinates of the airport in the existing Class D and E airspace areas, as well as Falmouth Airpark, Barnstable Municipal Airport-Boardman/Polando Field, Chatham Municipal Airport, Martha's Vineyard Airport, (formerly Martha's Vineyard Municipal Airport), and the BOGEY LOM.

This action amends Class E Airspace at Gainesville Regional Airport, Gainesville, FL; and Orlando Executive Airport, Orlando, FL, by eliminating the Notice to Airmen (NOTAM) part time status of the Class E airspace designated as an extension at each airport. This is an administrative change to coincide with the FAA's aeronautical database. This action also updates the geographic coordinates of Orlando Executive Airport in existing Class D and E airspace.

We propose to supersede Airworthiness Directive (AD) 98-13-14, for certain Airbus Model A320-211, -212, and -231 airplanes. AD 98-13- 14 currently requires repetitive rotating probe inspections of fastener holes and/or the adjacent tooling hole of a former junction of the aft fuselage, as applicable, and corrective action, if necessary. AD 98-13- 14 also provides for an optional terminating action for the repetitive inspections. Since we issued AD 98-13-14, an evaluation by the design approval holder (DAH) indicates that the former junction of the aft fuselage is subject to fatigue damage. This proposed AD would continue to require the actions in AD 98-13-14, with revised inspection compliance times. We are proposing this AD to detect and correct fatigue cracks in the former junction of the aft fuselage; fatigue cracking could propagate and could adversely affect the structural integrity of the airplane.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 747-200B, 747-300, 747-400, 747-400D, and 747-400F series airplanes. This proposed AD was prompted by a report of cracking in both the aluminum strut side skin, and corrosion resistant steel (CRES) outer spring beam support fitting. This proposed AD would require repetitive high frequency eddy current (HFEC) inspections for cracking in the strut side skin; an open-hole HFEC inspection for cracking, applicable related investigative and corrective actions; and a fastener installation modification. We are proposing this AD to detect and correct cracking of the strut side skin; such cracking could result in the failure of the outer spring beam support fitting, which could cause separation of a strut and engine from the airplane during flight.