Department of Transportation March 2014 – Federal Register Recent Federal Regulation Documents

This action proposes to establish Class E airspace at Crandon, WI. Controlled airspace is necessary to accommodate new Standard Instrument Approach Procedures (SIAPs) at Crandon/Steve Conway Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rules (IFR) operations for SIAPs at the airport.

The FAA proposes to rule and invites public comment on the release of land at the Sullivan Regional Airport, Sullivan, Missouri, under the provisions of 49 U.S.C. 47107(h)(2).

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on December 3, 2013 (78 FR 72750).

In accordance with Section 743 of Division C of the Consolidated Appropriations Act of 2010, Public Law 111-117, Department of Transportation is publishing this notice to advise the public of the availability of the FY 2013 Service Contract Inventory and the FY12 Service Contract Inventory Analysis Report. This inventory provides information on service contract actions over $25,000 awarded in FY 2013. The information is organized by function to show how contracted resources are distributed throughout the agency. The inventory has been developed in accordance with guidance issued on November 5, 2010 by the Office of Management and Budget's Office of Federal Procurement Policy (OFPP). OFPP's guidance is available at https://www.whitehouse.gov/ sites/default/files/omb/procurement/memo/service-contract-inv entories- guidance-11052010.pdf. Department of Transportation has posted its inventory and a summary of the FY13 inventory and the FY12 Service Contract Inventory Analysis Report on the Department of Transportation's homepage at the following link: https://www.dot.gov/ assistant-secretary-administration/procurement/service-contra ct- inventory. Questions regarding the service contract inventory should be directed to Diane Morrison in the Office of the Senior Procurement Executive at 202-366-4960 or diane.morrison@dot.gov.

We propose to adopt a new airworthiness directive (AD) for certain DASSAULT AVIATION Model FALCON 900EX airplanes. This proposed AD was prompted by our determination of the need for a revision to the airplane airworthiness limitations to introduce a corrosion prevention control program, among other changes, to the maintenance requirements and airworthiness limitations. This proposed AD would require revising the maintenance or inspection program, as applicable, to include the maintenance tasks and airworthiness limitations specified in the Airworthiness Limitations section of the airplane maintenance manual. We are proposing this AD to prevent reduced structural integrity of the airplane, and prevent reduced controllability of the airplane.

FRA is amending its existing regulation entitled Passenger Train Emergency Preparedness by revising or clarifying various provisions. The final rule clarifies that railroad personnel who communicate or coordinate with first responders during emergency situations must receive certain initial and periodic training and be subject to operational tests and inspections related to the railroad's emergency preparedness plan. The final rule also clarifies that railroads must develop procedures in their emergency preparedness plans that specifically address the safety of passengers with disabilities during actual and simulated emergency situations, such as during train evacuations. The rule also limits the need for FRA to formally approve certain purely administrative changes to approved emergency preparedness plans. In addition, the final rule requires that operational tests and inspections be conducted in accordance with a program that meets certain minimum requirements. Finally, the rule removes as unnecessary the provision discussing the preemptive effect of the regulations.

We are adopting a new airworthiness directive (AD) for all Pratt & Whitney (PW) PW2037, PW2037D, PW2037M, PW2040, PW2040D, PW2043, PW2146, PW2240, PW2337, PW2643, and F117-PW-100 turbofan engines. This AD was prompted by a rupture of the diffuser-to-high-pressure turbine (HPT) case flange. This AD requires a one-time eddy current inspection (ECI) of affected engines with certain diffuser and HPT cases installed. This AD also requires a fluorescent-penetrant inspection (FPI) of the diffuser case rear flange and HPT case front flange. We are issuing this AD to prevent failure of the diffuser-to-HPT case flange, which could lead to uncontained engine failure and damage to the airplane.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the applications described herein. This notice is abbreviated to expedite docketing and public notice. Because the sections affected, modes of transportation, and the nature of application have been shown in earlier Federal Register publications, they are not repeated here. Requests for modification of special permits (e.g. to provide for additional hazardous materials, packaging design changes, additional mode of transportation, etc.) are described in footnotes to the application number. Application numbers with the suffix ``M'' denote a modification request. These applications have been separated from the new application for special permits to facilitate processing.

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below.

FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 12 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.

Livin' Lite RV, Inc. (Livin' Lite), a wholly owned subsidiary of Thor Industries, Inc. (Thor), has determined that certain model year Livin' Lite RV trailers manufactured between November 7, 2008 and September 10, 2013, do not fully comply with paragraph S9 of Federal Motor Vehicle Safety Standard (FMVSS) No. 110, Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of 4,536 kilograms (10,000 pounds) or less and paragraph S10 of FMVSS No. 120, Tire Selection and Rims and Motor Home/Recreation Vehicle Trailer Load Carrying Capacity Information for Motor Vehicles with a GVWR of more than 4,536 kilograms (10,000 pounds). Thor has filed an appropriate report dated November 7, 2013, pursuant to 49 CFR part 573, Defect and Noncompliance Responsibility and Reports.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD was prompted by reports that elevator power control unit (PCU) shear pins may fail prematurely. This proposed AD would require repetitive replacement of the elevator PCU shear pins. We are proposing this AD to prevent PCU failure of elevator PCU sheer pins. If all pins fail on one elevator, the elevator surface would become inoperative, which could reduce the controllability of the airplane and could result in a loss of redundancy for flutter prevention.

We propose to supersede Airworthiness Directive (AD) 2009-06- 06 for all Airbus Model A310 and A300-600 series airplanes. AD 2009-06- 06 currently requires revising the Airworthiness Limitations Section of the Instructions for Continued Airworthiness to incorporate new limitations and maintenance tasks for aging systems maintenance. Since we issued AD 2009-06-06, we have determined that more restrictive maintenance requirements and airworthiness limitations are necessary. This proposed AD would require revising the maintenance or inspection program to incorporate new maintenance requirements and airworthiness limitations. We are proposing this AD to prevent reduced structural integrity and reduced control of these airplanes due to the failure of system components.

This notice announces actions taken by the FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to a proposed highway project, State Highway (SH) 360 from East Sublett Road/West Camp Wisdom Road to U.S. Highway 287 in the counties of Tarrant, Ellis, and Johnson in the State of Texas. Those actions grant licenses, permits, and approvals for the projects.

We are superseding Airworthiness Directive (AD) 2012-25-04 for Eurocopter France Model AS350B3 helicopters with a certain modification (MOD) installed. AD 2012-25-04 required installing two placards and revising the Rotorcraft Flight Manual (RFM). AD 2012-25-04 also required certain checks and inspecting and replacing, if necessary, all four laminated half-bearings (bearings). This new AD retains the previous AD requirements, requires certain modifications which would be terminating action for the airspeed limitations, and adds certain helicopter models to the bearing inspection with a different inspection interval. These actions are intended to prevent vibration due to a failed bearing, failure of the tail rotor, and subsequent loss of control of the helicopter.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8 airplanes. This AD requires repetitive functional checks of the nose and main landing gear, and corrective actions if necessary. This AD also provides optional terminating action for the repetitive functional checks. This AD was prompted by a report that the emergency downlock indication system (EDIS) had given a false landing gear down-and-locked indication. We are issuing this AD to detect and correct a false down-and-locked landing gear indication, which, on landing, could result in possible collapse of the landing gear.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require replacing a fitting that is part of the refuel control solenoid valve assembly. We are proposing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.

We are adopting a new airworthiness directive (AD) for British Aerospace Regional Aircraft Jetstream Series 3101 and Jetstream Model 3201 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as stress corrosion cracking of the main landing gear yoke pintle housing on a Jetstream series 3100 airplane. We are issuing this AD to require actions to address the unsafe condition on these products.

The Federal Motor Carrier Safety Administration (FMCSA) proposes amendments to the Federal Motor Carrier Safety Regulations (FMCSRs) to establish: Minimum performance and design standards for hours-of-service (HOS) electronic logging devices (ELDs); requirements for the mandatory use of these devices by drivers currently required to prepare HOS records of duty status (RODS); requirements concerning HOS supporting documents; and measures to address concerns about harassment resulting from the mandatory use of ELDs. This rulemaking supplements the Agency's February 1, 2011, Notice of Proposed Rulemaking (NPRM) and addresses issues raised by the U.S. Court of Appeals for the Seventh Circuit in its 2011 decision vacating the Agency's April 5, 2010, final rule concerning ELDs as well as subsequent statutory developments. The proposed requirements for ELDs would improve compliance with the HOS rules.

We are adopting a new airworthiness directive (AD) for certain Rockwell Collins TPR-720 and TPR-900 Mode select (S) transponders that are installed on airplanes. This AD was prompted by the identification that the TPR-720 and TPR-900 Mode S transponders respond intermittently to Mode S interrogations from both ground-based and traffic collision avoidance system (TCAS-) equipped airplanes. This AD requires testing and calibration of the alignment of the transponders. We are issuing this AD to correct the unsafe condition on these products.