Department of Transportation 2008 – Federal Register Recent Federal Regulation Documents
Results 1,651 - 1,700 of 3,130
Modification of Class D Airspace; Brunswick, ME
This action withdraws the direct final rule published in the Federal Register April 14, 2008 modifying Class D Airspace at Brunswick, ME. After publication it came to our attention that there had been a miscommunication about the operating hours of the Brunswick NAS Air Traffic Control Tower. The tower itself is still a 24-hour operation; therefore, there is no need to modify the Class D Airspace to reflect part-time status.
Modification of Class E Airspace; Wilkes-Barre, PA
This action confirms the effective date of a direct final rule published in the Federal Register on February 21, 2008 (FR 73 9445) Docket No. FAA-2008-0130 that modifies Class E Airspace at Wilkes- Barre, PA. Additionally, this action corrects a minor technical error in the publication of the coordinates for the Wyoming Valley Medical Center, Wilkes-Barre, PA and the Community Medical Center, Scranton, PA.
Establishment of Class E Airspace; Cranberry Township, PA
This action confirms the effective date of a direct final rule that establishes Class E Airspace at Cranberry Township, PA, to support a new Area Navigation (RNAV) Global Positioning System (GPS) Special Instrument Approach Procedure (IAP) that has been developed for medical flight operations into the University of Pittsburgh Medical Center (UPMC) Passavant-Cranberry Heliport. Additionally, this action corrects a minor typing error in the publication of the coordinates for the UPMC Passavant-Cranberry Heliport.
Establishment of Class E Airspace; Vinalhaven, ME
This action confirms the effective date of a direct final rule published in the Federal Register (73 FR 9186) that establishes Class E Airspace at Vinalhaven, ME to support a new Area Navigation (RNAV) Global Positioning System (GPS) Special Instrument Approach Procedure (IAP) that has been developed for medical flight operations into the Mary Talbot Memorial Airfield.
Establishment of Class E Airspace; Lewisburg, PA
This action confirms the effective date of a direct final rule that establishes a Class E airspace area to support Area Navigation (RNAV) Global Positioning System (GPS) Special Instrument Approach Procedures (IAPs) that serve the Evangelical Community Hospital, Lewisburg, PA. Additionally, this action corrects a minor technical error in the publication of the coordinates for the Evangelical Community Hospital East Heliport.
Establishment of Class E Airspace; Lady Lake, FL
This action withdraws the direct final rule published in the Federal Register March 21, 2008 establishing Class E Airspace at Lady Lake, FL (73 FR 15060), Docket No. FAA-2008-0072. This Direct final rule is being withdrawn in recognition of existing Class E Airspace at Lady Lake, FL that adequately supports the new Area Navigation (RNAV) Global Positioning System (GPS) Special Instrument Approach Procedure (IAP) that has been developed for medical flight operations into the Village of Homewood Lady Lake Hospital.
OST Technical Corrections
DOT is amending a number of its regulations to reflect reorganization of some elements of DOT and the move of DOT's Headquarters site in Washington, DC. This action is taken on DOT's initiative.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its denial of 330 applications from individuals who requested an exemption from the Federal vision standard applicable to interstate truck and bus drivers and the reasons for the denials. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemptions does not provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Qualification of Drivers; Exemption Applications; Diabetes
FMCSA announces receipt of applications from 56 individuals for exemptions from the prohibition against persons with insulin- treated diabetes mellitus (ITDM) operating commercial motor vehicles (CMVs) in interstate commerce. If granted, the exemptions would enable these individuals with ITDM to operate commercial motor vehicles in interstate commerce.
Qualification of Drivers; Exemption Renewals; Vision
FMCSA, in an earlier notice, announced its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 13 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has reviewed the comments submitted in response to the previous announcement and concluded that granting these exemptions will provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Medical Review Board Public Meeting
FMCSA announces a public meeting of the Agency's MRB. The MRB public meeting will provide the public an opportunity to observe and participate in MRB deliberations about the revision and development of Federal Motor Carrier Safety Regulation (FMCSR) medical standards, in accordance with the Federal Advisory Committee Act (FACA).
Agency Information Collection; Request for Comments; Clearance of Renewal Approval of Information Collection: Procedures for Transportation Drug Alcohol Testing Program
In compliance with the Paperwork Reduction Act of 1995, Public Law 104-13, (44 U.S.C. 3501 et seq.) this notice announces the Information Collection Request, abstracted below, is being forwarded to the Office of Management and Budget for extension of the currently approved Procedures for Transportation Drug and Alcohol Testing Program. On March 17, 2008 the Office of Drug and Alcohol Policy and Compliance (ODAPC) published a 60-day notice in the Federal Register (73 FR 14300) Docket OST-2008-0088, informing the public of ODAPC's intention to extend an approved information collection. Specifically, ODAPC solicited comments on whether the information collection is necessary for the proper performance of the functions of the Department, including whether the information will have practical utility. We asked whether the Department's estimate of the burden of the proposed information collection was accurate and for ways to enhance the quality, utility, and clarity of the information to be collected. The Department sought ways to minimize the burden for those who would have to provide information, including the use of automated collection techniques or other forms of information technology. One response, which contained several comments, was made to the docket. Among his comments, the respondent supported the Department's estimated burden hours associated with the collection and handling of each form and provided suggestions for updating the Alcohol Testing Form (ATF) and Management Information System (MIS) form. Each of the respondent's comments were addressed and are explained in the supporting statement to OMB. The ATF and MIS were updated to include an updated Paperwork Reduction Act Burden Statement, the current address of the Department, and DOT form numbers were added. We provided additional instructions on the reverse side of Page 3 of the ATF that tamper-evident tape must not obscure the printed information. Also, the legends in the test result boxes on the front of the ATF were adjusted and printed in a smaller font so they don't obscure test results printed directly on the ATF.
Airworthiness Directives; Rolls-Royce Corporation AE 3007A1E and AE 1107C Turbofan/Turboshaft Engines
The FAA proposes to adopt a new airworthiness directive (AD) for Rolls-Royce Corporation (RRC) AE 3007A1E and AE 1107C turbofan/ turboshaft engines. This proposed AD would require removal from service of certain 2nd stage, 3rd stage, and 4th stage compressor wheels, compressor cone shaft assemblies, and 1st to 2nd-stage turbine spacers, at new, reduced, published life limits. This proposed AD results from RRC applying an updated lifing methodology to the affected parts. We are proposing this AD to prevent low-cycle-fatigue (LCF) failure of the parts listed in Table 1 of this proposed AD, which could result in an uncontained engine failure and damage to the aircraft.
Environmental Impact Statement: Prince George's County, MD
The FHWA is issuing this notice to advise the public that an Environmental Impact Statement will be prepared for a proposed road project in Prince George's County, Maryland.
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval of a new information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on March 20, 2008, vol. 73, no. 55, page 15042. This project involves the random and representative sampling of Flight Attendants currently employed by U.S. air carriers.
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * This assessment showed that the electrical harness of the Fuel Quantity Gauging System (FQGS) is installed in the same routing as the 28 Volts AC, 28 Volts DC, and 115 Volts AC electrical harnesses. A chafing condition between these electrical harnesses and the FQGS harness could increase the surface temperatures of fuel quantity probes and high level sensors inside the fuel tank, resulting in potential ignition source[s] and consequent fuel tank explosion. * * * * * We are issuing this AD to require actions to correct the unsafe condition on these products.
Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800, and -900 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes. This AD requires various repetitive inspections to detect cracks along the chemically milled steps of the fuselage skin or missing or loose fasteners in the area of the preventative modification or repairs, replacement of the time-limited repair with the permanent repair if applicable, and applicable corrective actions if necessary, which would end certain repetitive inspections. This AD results from a fatigue test that revealed numerous cracks in the upper skin panel at the chemically milled step above the lap joint. We are issuing this AD to detect and correct such fatigue-related cracks, which could result in the crack tips continuing to turn and grow to the point where the skin bay flaps open, causing decompression of the airplane.
Airworthiness Directives; MORAVAN a.s. Model Z-143L Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) and CL-600-2D24 (Regional Jet Series 900) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: * * * * * The assessment and lightning tests showed that certain fuel tube self-bonded couplings do not provide sufficient lightning current capability. The assessment also showed that single failure of the integral bonding wire of the self-bonded couplings could affect electrical bonding between the tubes. Insufficient electrical bonding between fuel tubes or insufficient current capability of fuel tube couplings, if not corrected, could result in arcing and potential ignition source[s] inside the fuel tank during lightning strikes and consequent fuel tank explosion. * * *
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ and EMB-145XR Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 777 Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 777 airplanes. This AD requires an inspection to determine the manufacturer and manufacture date of the oxygen masks in the center and outboard passenger service units, crew rests, and lavatory and flight attendant oxygen boxes, as applicable. This AD also requires related investigative/corrective actions if necessary. This AD results from a report that several passenger masks with broken in-line flow indicators were found following a mask deployment. We are issuing this AD to prevent the in-line flow indicators of the passenger oxygen masks from fracturing and separating, which could inhibit oxygen flow to the masks and consequently result in exposure of the passengers and cabin attendants to hypoxia following a depressurization event.
Airworthiness Directives; British Aerospace Regional Aircraft Model HP.137 Jetstream Mk.1, Jetstream Series 200 and 3101, and Jetstream Model 3201 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Cessna Aircraft Company Model 525 Airplanes
We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Model 525 airplanes. This AD requires you to inspect for missing firewall sealant between the aft firewall assembly and seal assembly; and, if you find that firewall sealant is missing, seal with firewall sealant between the aft firewall assembly and seal assembly. This AD results from a report that firewall sealant may not have been applied between the aft firewall assembly and seal assembly during manufacture of certain Model 525 airplanes. We are issuing this AD to detect and correct missing firewall sealant between the aft firewall assembly and seal assembly, which could result in failure of the fire extinguishing system to prevent the spread of fire through the firewall gap. This failure could lead to an uncontrolled fire.
Notice of Receipt of Petition for Decision That Nonconforming 2004-2005 Ferrari 575 Passenger Cars Are Eligible for Importation
This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2004-2005 Ferrari 575 passenger cars that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards (FMVSS) are eligible for importation into the United States because (1) they are substantially similar to vehicles that were originally manufactured for sale in the United States and that were certified by their manufacturer as complying with the safety standards (the U.S.-certified version of the 2004-2005 Ferrari 575 passenger car), and (2) they are capable of being readily altered to conform to the standards.
Common Carrier Obligation of Railroads-Transportation of Hazardous Materials
The Surface Transportation Board will hold a public hearing beginning at 9 a.m. on Wednesday, July 16, 2008, at its headquarters in Washington, DC. The purpose of the public hearing will be to examine issues related to the common carrier obligation of railroads with respect to the transportation of hazardous materials. Persons wishing to speak at the hearing should notify the Board in writing.
Notice of National Grain Car Council Meeting
Notice is hereby given of a meeting of the National Grain Car Council (NGCC), pursuant to section 10(a)(2) of the Federal Advisory Committee Act, Pub. L. No. 92-463, as amended (5 U.S.C., App. 2).
Airworthiness Directives; ATR Model ATR42-200, -300, and -320 Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Notice of Intent To Rule on Request To Release Airport Property at the Scappoose Industrial Airpark, Scappoose, OR
The FAA proposes to rule and invite public comment on the release of land at Scappoose Industrial Airpark under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).
Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals
The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph d of 158.29.
Notice of Availability of Record of Decision for the Environmental Impact Statement Approving an Operations Specifications Amendment for Horizon Air to Provide Scheduled Air Service to and From Mammoth Yosemite Airport, Mammoth Lakes, Mono County, CA
The Federal Aviation Administration (FAA) is issuing this notice to advise the public that it has published a Record of Decision (ROD) for the Environmental Impact Statement (EIS) that evaluated proposed approval of an Operations Specifications Amendment to allow Horizon Air to conduct scheduled air service to Mammoth Yosemite Airport (MMH). FAA approved the ROD on May 14, 2008.
Airworthiness Directives; Short Brothers Model SD3-60 Airplanes Equipped with an Auxiliary Fuel Tank System Installed in Accordance With Supplemental Type Certificate SA00404AT
We are adopting a new airworthiness directive (AD) for certain Short Brothers Model SD3-60 airplanes. This AD requires deactivation of auxiliary fuel tank systems installed in accordance with Supplemental Type Certificate SA00404AT. This AD results from fuel tank system review requirements done in accordance with Special Federal Aviation Regulation No. 88 (SFAR 88), which identified potential unsafe conditions. We are issuing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Agency Information Collection Activities; Revision of a Currently-Approved Information Collection: Application for Certificate of Registration for Foreign Motor Carriers and Foreign Motor Private Carriers
In accordance with the Paperwork Reduction Act of 1995, FMCSA announces its plan to submit the Information Collection Request (ICR) described below to the Office of Management and Budget (OMB) for its review and approval. The FMCSA requests approval to revise an information collection (IC) entitled, ``Application for Certificate of Registration for Foreign Motor Carriers and Foreign Motor Private Carriers,'' that requires Mexico-domiciled for-hire and private motor carriers to file an application Form OP-2 if they wish to register to transport property only within municipalities in the United States on the U.S.-Mexico international borders or within the commercial zones of such municipalities. FMCSA invites public comment on the ICR.
Commercial Driver's License Testing and Commercial Learner's Permit Standards; Extension of Comment Period
In response to several requests, the Federal Motor Carrier Safety Administration (FMCSA) extends until July 9, 2008, the comment period for the notice of proposed rulemaking (NPRM) that was published on April 9, 2008.
Air Traffic Procedures Advisory Committee
The FAA is issuing this notice to advise the public that a meeting of the Federal Aviation Administration Air Traffic Procedures Advisory Committee (ATPAC) will be held to review present air traffic control procedures and practices for standardization, revision, clarification, and upgrading of terminology and procedures.
Requested Administrative Waiver of the Coastwise Trade Laws
As authorized by Public Law 105-383 and Public Law 107-295, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.- build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2008-0048 at https:// www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with Pub. L. 105-383 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the waiver application, and address the waiver criteria given in Sec. 388.4 of MARAD's regulations at 46 CFR Part 388.
Information Collection Available for Public Comments and Recommendations
In accordance with the Paperwork Reduction Act of 1995, this notice announces the Maritime Administration's (MARAD's) intention to request extension of approval (with modifications) for three years of a currently approved information collection.
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701, & 702) Airplanes; CL-600-2D15 (Regional Jet Series 705) Airplanes; and CL-600-2D24 (Regional Jet Series 900) Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 737-600, -700, -800, and -900 Series Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -800, and -900 series airplanes. This proposed AD would require installation of hot short protector (HSP) support brackets and equipment for the fuel quantity indicating system (FQIS) fuel densitometer and other specified actions as applicable. This proposed AD would also require a revision to the Airworthiness Limitations (AWLs) section of the Instructions for Continued Airworthiness to incorporate AWL No. 28-AWL-07. This proposed AD results from fuel system reviews conducted by the manufacturer. We are proposing this AD to prevent the center tank fuel densitometer from overheating and becoming a potential ignition source inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a center fuel tank explosion and consequent loss of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
