February 17, 2009 – Federal Register Recent Federal Regulation Documents

NMFS announces final 2009 and 2010 harvest specifications and prohibited species catch allowances for the groundfish fishery of the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary to establish harvest limits for groundfish during the 2009 and 2010 fishing years and to accomplish the goals and objectives of the Fishery Management Plan for Groundfish of the Bering Sea and Aleutian Islands Management Area (FMP). The intended effect of this action is to conserve and manage the groundfish resources in the BSAI in accordance with the Magnuson-Stevens Fishery Conservation and Management Act.

NMFS is prohibiting directed fishing for Pacific cod by catcher vessels less than 60 feet (18.3 m) length overall (LOA) using jig or hook-and-line gear in the Bogoslof Pacific cod exemption area of the Bering Sea and Aleutian Islands management area (BSAI). This action is necessary to prevent exceeding the limit of Pacific cod for catcher vessels

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The Federal Housing Finance Agency (FHFA) is correcting the final Flood Insurance Regulation, published in the Federal Register on January 15, 2009 (74 FR 2347), by deleting the addition of a subchapter.

This action withdraws an FTA notice of proposed rulemaking (NPRM), Contractor Performance Incentives for the Capital Investment Program, published in the Federal Register on February 19, 2008 (73 FR 9075). FTA has determined that contractor performance incentives do not require a rulemaking to be effectuated. Rather, FTA can work with project sponsors on a case-by-case basis to provide incentives, and therefore, the rulemaking is withdrawn.

The U.S. Nuclear Regulatory Commission (NRC) is denying a petition for rulemaking (PRM-170-6) submitted by the Technical Specifications Task Force (TSTF), which is a jointly sponsored activity of the Pressurized Water Reactor Owners Group and the Boiling Water Reactor Owners' Group. The petition requests that the NRC amend its regulations to provide an explicit exemption from NRC review fees for activities associated with generic improvements to the Improved Standard Technical Specifications (ISTS). The NRC is denying the petition because the petition presents issues that the NRC has already carefully considered and addressed. Also, the petition fails to present any significant new information or arguments that would warrant the requested amendment.

The FAA is superseding an existing airworthiness directive (AD) for Turbomeca Turmo IV A and IV C series turboshaft engines. That AD is applicable to engines with oil-tank-to-oil-cooler flexible lubrication pipes, part number (P/N) 0 249 92 813 0 or P/N 0 249 92 916 0, installed. That AD currently requires identifying, inspecting, and replacing affected flexible lubrication pipes manufactured after April 1, 2003. That AD also requires initial and repetitive borescope inspections of affected pipes, visual inspections for oil leakage, and visual inspections of the oil filter. That AD also requires that if both engines on the same helicopter each have an affected pipe, replacing one of the affected pipes before further flight. This AD does not contain that requirement. This AD requires the same inspections as the superseded AD and adds inspection of oil-pump-to-intermediate- bearing flexible lubricating pipe, P/N 0 249 92 808 0. This AD also requires all remaining affected flexible lubrication pipes, P/N 0 249 92 813 0, P/N 0 249 92 916 0, and P/N 0 249 92 808 to be replaced as terminating action to the repetitive inspections for those affected pipes. This AD results from additional shutdowns caused by pipes, P/N 0 249 92 808 0, and the introduction of Turbomeca Modifications TU 231 and TU 233 that replace pipes, P/N 0 249 92 813 0, P/N 0 249 92 916 0, and P/N 0 249 92 808. We are issuing this AD to prevent helicopter engine in-flight shutdown of one or both engines resulting in an emergency auto-rotation landing or accident.

The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Corporation (RRC) AE 3007A1E and AE 1107C turbofan/ turboshaft engines. This AD requires removal from service of certain 2nd stage, 3rd stage, and 4th stage compressor wheels, compressor cone shaft assemblies, and 1st to 2nd-stage turbine spacers at new, reduced, published life limits. This AD results from RRC applying an updated lifing methodology to the affected parts. We are issuing this AD to prevent low-cycle-fatigue failure of the parts listed in Table 1 of this AD, which could result in an uncontained engine failure and damage to the aircraft.