Federal Aviation Administration March 11, 2016 – Federal Register Recent Federal Regulation Documents

Policy Regarding Use of H-11 Bolts in Primary Structure on Transport Airplanes
Document Number: 2016-05532
Type: Notice
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces the cancellation of Policy Statement Number PS-ANM100-1986-00051. The policy statement is cancelled because it was superseded by an advisory circular (AC) and is no longer necessary.
FAR 25.723 Energy Absorption Tests
Document Number: 2016-05531
Type: Notice
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces the cancellation of Policy Statement Number PS-ANM100-1982-00038. The policy statement is cancelled because it was superseded by an advisory circular (AC) and is no longer necessary.
Policy Statement on Guidance for Determination of System, Hardware, and Software Development Assurance Levels on Transport Category Airplanes
Document Number: 2016-05529
Type: Notice
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces the cancellation of Policy Statement Number ANM-03-117-09. The policy statement is cancelled because it was superseded by an advisory circular (AC) and is no longer necessary.
Airworthiness Directives; Continental Motors, Inc. Reciprocating Engines
Document Number: 2016-05467
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Continental Motors, Inc. (CMI) TSIO-550-K, TSIOF-550-K, TSIO- 550-C, TSIOF-550-D, and TSIO-550-N reciprocating engines. This proposed AD was prompted by a report of an uncommanded in-flight shutdown (IFSD) resulting in injuries and significant airplane damage. This proposed AD would require replacing the oil cooler cross fitting assembly. We are proposing this AD to prevent failure of the oil cooler cross fitting and engine, IFSD and loss of the airplane.
Airworthiness Directives; Turbomeca S.A. Turboshaft Engines
Document Number: 2016-05465
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Turbomeca S.A. MAKILA 2A and MAKILA 2A1 turboshaft engines. This proposed AD was prompted by two occurrences of crack initiation on a ferrule of the diffuser. This proposed AD would require repetitive diffuser inspections and replacement of those diffusers that fail inspection. We are proposing this AD to prevent rupture of the ferrule of the diffuser, which could result in engine fire and damage to the helicopter.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG Turbofan Engines
Document Number: 2016-05463
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede airworthiness directive (AD) 2006-18- 14 that applies to all Rolls-Royce Deutschland Ltd & Co KG (RRD) Tay 650-15 and Tay 651-54 turbofan engines. AD 2006-18-14 requires calculating and re-establishing the cyclic life of stage 1 high- pressure turbine (HPT) disks, part number (P/N) JR32013 and P/N JR33838, and stage 1 low-pressure turbine (LPT) disk, P/N JR32318A. This proposed AD would require re-calculating the cyclic life, and would impose a reduced cyclic life, of stage 1 HPT disk, P/N JR32013. We are proposing this AD to prevent failure of stage 1 HPT disks, P/N JR32013 and P/N JR33838, and stage 1 LPT disk, P/N JR32318A, which could result in an uncontained engine failure and damage to the airplane.
Airworthiness Directives; Turbomeca S.A. Turboshaft Engines
Document Number: 2016-05461
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede airworthiness directive (AD) 2010-11- 10 that applies to all Turbomeca S.A., Astazou XIV B and XIV H turboshaft engines. AD 2010-11-10 requires inspection of certain third stage turbine wheels and removal of any damaged wheel. This AD was prompted by a report of a third stage turbine wheel crack detected during engine overhaul. This proposed AD would expand the population and frequency of repetitive inspections. We are proposing this AD to prevent uncontained failure of the third stage turbine wheel, which could result in damage to the engine and damage to the helicopter.
Airworthiness Directives; Dowty Propellers Constant Speed Propellers
Document Number: 2016-05460
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Dowty Propellers R352/6-123-F/1, R352/6-123-F/2, and R410/6-123-F/35 model propellers. This AD was prompted by reports of dowel hole cracks in the face of the rear hub half. This AD requires installing dowel hole liners as necessary. We are issuing this AD to prevent loss of structural integrity of the propeller hub, which could result in damage to the propeller and damage to the airplane.
Amendment of Class D and E Airspace; Enid Vance AFB, OK; Enid Woodring Municipal Airport, Enid, OK; and Enid, OK
Document Number: 2016-05395
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
This action changes the effective date of a final rule published in the Federal Register of February 19, 2016, amending Class E surface area airspace, Class E airspace designated as an extension, and Class E airspace extending upward from 700 feet above the surface, in the Enid, OK, area to allow additional time for charting. This correction adds the part-time Notice to Airmen (NOTAM) language inadvertently removed from the Class E surface area description for Vance AFB, and Woodring Municipal Airport, Enid, OK. Adjustment of the geographic coordinates are also made to the Vance VHF Omnidirectional Range Tactical Air Navigation (VORTAC) listed in the Class E airspace area designated as an extension to the Class D surface area.
Airworthiness Directives; Airbus Helicopters
Document Number: 2016-05369
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Airbus Helicopters Model AS 365 N3 helicopters. This proposed AD would require inspecting the cabin and cockpit for labels, placards, or markings that provide jettison procedure instructions for cabin doors, removing any labels, placards, or markings that are in an incorrect location, and installing placards where they are missing. This proposed AD is prompted by the determination that placards had not been installed according to specifications on newly manufactured helicopters. The proposed actions are intended to provide exit procedures during an emergency.
Airworthiness Directives; AgustaWestland S.p.A. (Agusta) Helicopters
Document Number: 2016-05368
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Agusta Model AB139 and AW139 helicopters. This proposed AD would require performing operational checks of both hydraulic systems. This proposed AD is prompted by an assessment of the hydraulic systems of the helicopter following an accident. The proposed actions are intended to prevent loss of hydraulic power to the flight controls and subsequent loss of control of the helicopter.
Airworthiness Directives; Sikorsky Aircraft Corporation
Document Number: 2016-05258
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. This AD requires certain inspections of the main rotor and tail rotor control pushrods (pushrods). This AD is prompted by a Sikorsky investigation that indicated that some pushrods may have incorrectly installed locking mechanisms. These AD actions are intended to detect an incorrectly installed locking mechanism, which if not corrected, could result in a loose jam nut, failure of the pushrod, loss of main rotor or tail rotor flight control, and consequent loss of helicopter control.
Proposed Amendment of Class D and Class E Airspace for the Following Oklahoma Towns; Antlers, OK; Oklahoma City, OK; Oklahoma City Wiley Post Airport, OK; and Shawnee, OK
Document Number: 2016-05177
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class D airspace, Class E airspace designated as surface areas, and Class E airspace extending upward from 700 feet above the surface at Antlers, OK; Oklahoma City, OK; Oklahoma City Wiley Post Airport, OK; and Shawnee, OK. The decommissioning of non-directional radio beacons (NDB) and/or cancellation of NDB approaches due to advances in Global Positioning System (GPS) capabilities have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above locations. This action also would note the updated airport names of David Jay Perry Airport, Goldsby, OK; El Reno Regional Airport, Shawnee Regional Airport, and Chandler Regional Airport to coincide with the FAA's aeronautical database. Additionally, this action would update the geographic coordinates for Tinker AFB, El Reno Regional Airport, Wiley Post Airport, Sundance Airpark, Seminole Municipal Airport, Prague Municipal Airport, Chandler Regional Airport, Tilghman NDB, Cushing Municipal Airport, Cushing NDB, and Cushing Regional Hospital Heliport to coincide with the FAA's aeronautical database.
Proposed Amendment of Class E Airspace; Clovis, NM
Document Number: 2016-05173
Type: Proposed Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Portales Municipal Airport, Clovis, NM. This action is necessary due to the decommissioning of the Portales non-directional radio beacon (NDB), cancellation of NDB approaches at Portales Municipal Airport, and implementation of area navigation (RNAV) procedures at the airport. This action will also update the geographic coordinates for Portales Municipal Airport to coincide with the FAA's aeronautical database. This proposal would enhance the safety and management of Instrument Flight Rules (IFR) operations in the Clovis, NM, airspace area.
Airworthiness Directives; MD Helicopters, Inc. (MDHI) Helicopters
Document Number: 2016-04982
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain MDHI Model 369A (Army OH-6A), 369H, 369HE, 369HM, 369HS, 369D, 369E, 369F, 369FF, and 500N helicopters. This AD requires inspecting the auxiliary fuel pump (fuel pump) wire routing in the left-hand fuel cell and corrective action, if necessary. This AD also requires installing a warning decal on the left-hand fuel cell access cover. This AD was prompted by accidents resulting from incorrectly positioned fuel pump wiring within the fuel tank interfering with the operation of the fuel quantity sensor float, which caused an erroneous fuel quantity indication in the cockpit. The actions are intended to detect and correct routing of the fuel pump wiring to prevent interference with the fuel quantity sensor float, an erroneous fuel quantity indication in the cockpit, and subsequent fuel exhaustion and emergency landing.
Airworthiness Directives; Airbus Helicopters
Document Number: 2016-04981
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model AS 365 N3, EC 155B, and EC155B1 helicopters with certain external life rafts. This AD requires installing a sheath kit on the left-hand and right-hand raft deployment control systems. This AD is prompted by a report that the life raft deployment control could not be adjusted due to problems with the life raft deployment linkage. This unsafe condition, if not corrected, could result in failure of the external life raft to deploy and prevent evacuation of passengers during an emergency.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2016-04564
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-08-23 for all The Boeing Company Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, MD-10- 30F, MD-11, and MD-11F airplanes. AD 2013-08-23 required adding design features to detect electrical faults and to detect a pump running in an empty fuel tank. This new AD would clarify certain requirements and remove a terminating action. This new AD would also provide an optional method of compliance for the proposed actions. This AD was prompted by a determination that it is necessary to clarify the requirements for the design features and to remove a terminating action for certain inspections. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Airworthiness Directives; Piper Aircraft, Inc. Airplanes
Document Number: 2016-04417
Type: Rule
Date: 2016-03-11
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 96-12-12, which applies to certain Piper Aircraft, Inc. Models PA-31, PA-31-300, PA-31-325, and PA-31-350 airplanes. AD 96-12-12 requires a one-time inspection of the bulkhead assembly at fuselage station (FS) 317.75 for cracks and the installation of one of two reinforcement kits determined by whether cracks were found during the inspection. This new AD requires repetitive inspections of the bulkhead assembly at FS 317.75 for cracks, repair of cracks as necessary, and the installation of a reinforcement modification. This AD was prompted by cracks found in the FS 317.75 upper bulkhead. We are issuing this AD to correct the unsafe condition on these products.