Federal Aviation Administration September 2014 – Federal Register Recent Federal Regulation Documents

Results 101 - 149 of 149
Special Conditions: Airbus Model A350-900 Airplane; Electronic System-Security Protection From Unauthorized External Access
Document Number: 2014-21243
Type: Rule
Date: 2014-09-08
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for Airbus Model A350-900 airplanes. These airplanes will have a novel or unusual design feature associated with electronic system-security protection from unauthorized external access. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-21223
Type: Notice
Date: 2014-09-08
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-21222
Type: Notice
Date: 2014-09-08
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-21221
Type: Notice
Date: 2014-09-08
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Advisory Circular for Aviation Safety Action Program (ASAP)
Document Number: 2014-21094
Type: Proposed Rule
Date: 2014-09-05
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is announcing the availability of proposed Advisory Circular (AC) 120-66C. AC 120-66C provides guidance for establishing an air transportation Aviation Safety Action Program (ASAP).
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2014-21019
Type: Rule
Date: 2014-09-05
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2014-05-02 for certain The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. AD 2014-05-02 required repetitive inspections for cracking and corrosion of the aft pressure bulkhead, repetitive inspections of the frame chord drain path for debris, and corrective actions if necessary; and, for certain airplanes, enlargement of frame chord drain holes. This AD requires the same actions as AD 2014-05-02, but revises a certain repetitive inspection interval to avoid a misunderstanding of the repetitive inspection interval for the aft pressure bulkhead. This AD was prompted by reports from operators expressing confusion regarding a certain repetitive inspection interval for the aft pressure bulkhead. We are issuing this AD to detect and correct corrosion or cracking of the aft pressure bulkhead, which could result in loss of the aft pressure bulkhead web and stiffeners, and consequent rapid decompression of the airplane.
Establishment of Class E Airspace; Flagstaff, AZ
Document Number: 2014-20809
Type: Rule
Date: 2014-09-05
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at the Flagstaff VHF Omni-Directional Radio Range/Distance Measuring Equipment (VOR/DME) navigation aid, Flagstaff, AZ, to facilitate vectoring of Instrument Flight Rules (IFR) aircraft under control of Albuquerque Air Route Traffic Control Center (ARTCC). This improves the safety and management of IFR operations within the National Airspace System.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Agricultural Aircraft Operator Certificate Application
Document Number: 2014-21084
Type: Notice
Date: 2014-09-04
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 12, 2014, vol. 79, no. 113, page 33797. Standards have been established for the certification of agricultural aircraft. The information collected shows applicant compliance and eligibility for certification by FAA.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: FAA Entry Point Filing Form-International Registry
Document Number: 2014-21082
Type: Notice
Date: 2014-09-04
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 12, 2014, vol. 79, no. 113, page 33798. The respondents supply information through the AC 8050-135 to the FAA Civil Aviation Registry's Aircraft Registration Branch in order to obtain an authorization code for access to the International Registry.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Airplanes
Document Number: 2014-21059
Type: Proposed Rule
Date: 2014-09-04
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB -135ER, - 135KE, -135KL, -135LR, -145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. This proposed AD was prompted by our determination of the need to revise the airplane airworthiness limitations to the pylon and fuselage. This proposed AD would require revising the maintenance or inspection program. We are proposing this AD to prevent fatigue cracking of various structural elements, which could affect the structural integrity of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-21055
Type: Proposed Rule
Date: 2014-09-04
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2007-22- 10, for all Airbus Model A330-200, A330-300, A340-200, A340-300, A340- 500, and A340-600 series airplanes. AD 2007-22-10 currently requires repetitive inspections of the left-hand and right-hand wing main landing gear (MLG) rib 6 aft bearing lugs (forward and aft) to detect any cracking, and replacement if necessary. Since we issued AD 2007-22- 10, we have received reports of additional cracking of the MLG rib 6 aft bearing forward lug. This proposed AD would expand the applicability and reduce certain compliance times. We are proposing this AD to detect and correct cracking of the MLG rib 6 aft bearing lugs, which could result in collapse of the MLG upon landing.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2014-21037
Type: Rule
Date: 2014-09-04
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2011-16-01 for all Dassault Aviation Model FALCON 7X airplanes. AD 2011-16-01 required adding an automatic reversion logic and a means for the pilot to override pitch trim control normal modes, and installing placards in the cockpit; replacing the frame of the emergency switch box; replacing certain horizontal stabilizer electronic control units (HSECU); revising the Limitations section of the airplane flight manual (AFM); and revising the maintenance program to incorporate a certain task. This new AD requires modifying the fly-by-wire (FBW) standard; and operational testing of the electric motors reversion relays and trim emergency command of the horizontal stabilizer trim system (HSTS), and repairs if necessary. This AD was prompted by an uncontrolled pitch trim runaway during descent. We are issuing this AD to prevent an uncontrolled pitch trim runaway, which could result in loss of control of the airplane.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Commercial Space Transportation Licensing Regulations
Document Number: 2014-20995
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The information will determine if applicant proposals for conducting commercial space launches can be accomplished according to regulations issued by the Office of the Associate Administrator for Commercial Space Transportation.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: General Aviation Awards Program
Document Number: 2014-20994
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The collection is used to nominate private citizens for recognition of their significant voluntary contribution to aviation education and flight safety.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Rotorcraft External Load Operator Certificate Application
Document Number: 2014-20993
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Information required from the public by 14 CFR Part 133 is used by the FAA to process the operating certificate as a record of aircraft authorized for use, and to monitor Rotorcraft External-Load Operations.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Aircraft Registration
Document Number: 2014-20992
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for to renew an information collection. The information collected is used by the FAA to register aircraft or hold an aircraft in trust. The information required to register and prove ownership of an aircraft is required by any person wishing to register an aircraft.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection(s): Flight Engineers and Flight Navigators
Document Number: 2014-20991
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Information collected is used to determine certification eligibility of Flight Engineers and Flight Navigators.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: General Operating and Flight Rules
Document Number: 2014-20990
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. Part A of Subtitle VII of the Revised Title 49 U.S.C. authorizes the issuance of regulations governing the use of navigable airspace. Information is collected to determine compliance with Federal regulations. Respondents are individual airmen, state or local governments, and businesses.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Malfunction or Defect Report
Document Number: 2014-20989
Type: Notice
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for to renew an information collection. The information collected allows the FAA to evaluate its certification standards, maintenance programs, and regulatory requirements. It is also the basis for issuance of Airworthiness Directives designed to prevent unsafe conditions and accidents.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
Document Number: 2014-20943
Type: Proposed Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model BAe 146 series airplanes, and Model Avro 146-RJ series airplanes. This proposed AD was prompted by a report of a pressurization problem on an airplane during climb-out; a subsequent investigation showed a crack in the fuselage skin. This proposed AD would require repetitive external eddy current inspections on the aft skin lap joints of the rear fuselage for cracking, corrosion, and other defects, and repair if necessary. We are proposing this AD to detect and correct cracking, corrosion, and other defects, which could affect the structural integrity of the airplane.
Airworthiness Directives; BAE Systems (Operations) Limited Airplanes
Document Number: 2014-20940
Type: Proposed Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all BAE Systems (Operations) Limited Model 4101 airplanes. This proposed AD was prompted by a report of the failure, due to overheat, of a bracket on which the earth post (EP) for the generator and propeller de-ice systems is located. This proposed AD would require an inspection of the affected EPs and attachment structure for damage, an inspection of the earth cables of the generator and propeller de-ice system for signs of overheating and arcing damage, a torque check of the affected EP stiff nuts, an electrical high current bonding check of the bracket, and corrective actions if necessary. We are proposing this AD to detect and correct an overheat failure of the EPs for the generator and propeller de-ice system, and possible degradation of the wing front spar cap and/ or web, which could affect the structural integrity of the wing.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-20937
Type: Proposed Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318-111 and -112 airplanes, Model A319, A320, and A321 series airplanes. This proposed AD was prompted by reports of cracks on the forward corner fittings of engine pylon aft secondary structures. This proposed AD would require repetitive inspections of certain forward corner fittings of the pylon aft secondary structures, and corrective actions if necessary. This proposed AD also provides optional terminating action for the repetitive inspections. We are proposing this AD to detect and correct detachment of the lower fairing attachment and/or loss of the aft fixed fairing with the movable fairing from the airplane in flight, which could result in damage to the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-20917
Type: Proposed Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2008-06- 18, for all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes) and Model A300 series airplanes. AD 2008-06-18 currently requires repetitive inspections for any cracking of the wing lower skin panel and associated internal support structure, and if necessary, corrective actions such as modifying the lower panel inboard of rib 9 aft of the rear spar and repairing cracks. Since we issued AD 2008-06-18, we have received a report that information from an analysis and fleet survey show a need for reduced compliance times and intervals. This proposed AD would continue to require the existing requirements, and would reduce some compliance times. We are proposing this AD to detect and correct cracking, which could lead to reduced structural integrity of the airplane.
Special Conditions: Embraer S.A.; Model EMB-550 Airplane; Flight Envelope Protection: High Incidence Protection System
Document Number: 2014-20893
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature when compared to the state of technology and design envisioned in the airworthiness standards for transport category airplanes. This design feature is a high incidence protection system that limits the angle of attack at which the airplane can be flown during normal low speed operation. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Gulfstream Aerospace Corporation, Model GVI; Electro-Hydraulically Actuated Seats Equipped With a Backup Power Supply
Document Number: 2014-20865
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for Gulfstream Aerospace Corporation Model GVI airplane. This airplane, as modified by Gulfstream Aerospace Corporation, will have novel or unusual design features associated with the installation of electro-hydraulically operated seats with a backup power supply (BPS) and hydraulic reservoir, pump, and actuators, as well as massage and heating functions. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for these design features. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Establishment of Class E Airspace; Albuquerque, NM
Document Number: 2014-20816
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at the Albuquerque VHF Omni-Directional Radio Range Tactical Air Navigation Aid (VORTAC), Albuquerque, NM, to facilitate vectoring of Instrument Flight Rules (IFR) aircraft under control of Albuquerque Air Route Traffic Control Center (ARTCC). This improves the safety and management of IFR operations within the National Airspace System.
Modification of Class E Airspace; Hulett, WY
Document Number: 2014-20812
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
This action modifies Class E airspace at Hulett Municipal Airport, Hulett, WY, to accommodate aircraft using the Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures. This action enhances the safety and management of aircraft operations at the airport.
Airworthiness Directives; Pratt & Whitney Canada Corp. Turboprop Engines
Document Number: 2014-20453
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Pratt & Whitney Canada Corp. (P&WC) PT6A-114 and PT6A-114A turboprop engines. This AD requires initial and repetitive borescope inspection (BSI) of compressor turbine (CT) blades, and the removal from service of blades that fail inspection. This AD was prompted by several incidents of CT blade failure, causing power loss, and engine failure. We are issuing this AD to prevent failure of CT blades, which could result in damage to the engine and damage to the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-20259
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus Model A300 series airplanes; Model A300 B4-600, B4-600R, and F4- 600R series airplanes; Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes); and Model A310 series airplanes. This AD was prompted by reports of rupture of the uplock springs of the nose landing gear (NLG) and main landing gear (MLG) doors and legs. This AD requires repetitive inspections of the uplock springs of the NLG and MLG doors and legs for broken and damaged springs, and corrective actions if necessary. We are issuing this AD to detect and correct improper free fall extension of the MLG or NLG, which could lead to possible loss of control of the airplane on the ground, and consequent damage to the airplane and injury to occupants.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-20258
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2011-17-08 for all Airbus Model A330-200 series airplanes, Model A330-200 Freighter series airplanes, and Model A330-300 series airplanes. AD 2011-17-08 required revising the maintenance program by incorporating certain Airworthiness Limitation Items (ALIs). This new AD requires a revision to the maintenance or inspection program, as applicable, to incorporate new or revised structural inspection requirements. This AD was prompted by a revision of certain airworthiness limitations items (ALI) documents, which specifies more restrictive instructions and/or airworthiness limitations. We are issuing this AD to detect and correct fatigue cracking, damage, and corrosion in certain structure, which could result in reduced structural integrity of the airplane.
Airworthiness Directives; Various de Havilland Airplanes
Document Number: 2014-20241
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Harry E. Williams de Havilland Model DH 82A airplanes, all Cliff Robertson de Havilland Model DH 82A airplanes, and all de Havilland Model DH 83 airplanes. This AD requires inspecting the aircraft maintenance records and/or the installed lateral fuselage tie rods and attaching nuts to determine the origin of manufacture. This AD also requires immediately replacing lateral fuselage tie rods and attaching nuts produced by a specific manufacturer. This AD was prompted by reports of structural failure of the attachment of the wing to the fuselage that resulted from failed lateral fuselage tie rods. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2014-20213
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767-400ER series airplanes. This AD was prompted by reports of turbine wheel bursts in the air driven pump (ADP) turbine gearbox assembly (TGA), which resulted in the release of high energy fragments. This AD requires replacing the existing ADP TGA with an improved ADP TGA. We are issuing this AD to prevent fragments from an uncontained turbine wheel burst penetrating the fuselage and striking passengers, or penetrating the wing-to-body fairing and striking ground handling or maintenance personnel, causing serious injury.
Airworthiness Directives; Airbus Airplanes
Document Number: 2014-19725
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2007-06-12 for certain Airbus Model A330-200 and A330-300 airplanes. This new AD reduces the compliance times for reinforcing the structure of the center fuselage. This AD was prompted by a new fatigue and damage tolerance evaluation that revealed the compliance time for an existing reinforcement of the fuselage has to be reduced. We are issuing this AD to prevent fatigue cracking of the fuselage, which could result in reduced structural integrity of the fuselage.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2014-19020
Type: Rule
Date: 2014-09-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Dassault Aviation Model FALCON 2000EX airplanes. This AD was prompted by a revision to the airplane airworthiness limitations to introduce a corrosion prevention control program, among other changes, to the maintenance requirements and airworthiness limitations. This AD requires revising the maintenance or inspection program to include the maintenance tasks and airworthiness limitations specified in the airworthiness limitations section of the airplane maintenance manual. We are issuing this AD to prevent reduced structural integrity of the airplane.
Government/Industry Aeronautical Charting Forum Meeting
Document Number: 2014-20871
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the bi-annual meeting of the Federal Aviation Administration (FAA) Aeronautical Charting Forum (ACF) to discuss informational content and design of aeronautical charts and related products, as well as instrument flight procedures development policy and design criteria.
Meeting: RTCA Program Management Committee
Document Number: 2014-20822
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Program Management Committee.
Twelfth Meeting: RTCA NextGen Advisory Committee (NAC)
Document Number: 2014-20821
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the thirteenth meeting of the RTCA NextGen Advisory Committee.
Second Meeting: RTCA Special Committee 231, Special Committee 231, TAWS-GPWS
Document Number: 2014-20819
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the second meeting of the RTCA Special Committee 231, TAWS-GPWS.
Proposed Establishment of Class E Airspace; Cloverdale, CA
Document Number: 2014-20817
Type: Proposed Rule
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace at Cloverdale Municipal Airport, Cloverdale, CA. Controlled airspace is necessary to accommodate Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures at the airport. The FAA is proposing this action to enhance the safety and management of aircraft operations at the airport.
Proposed Establishment of Class E Airspace, and Amendment of Class D and Class E Airspace; Prescott, AZ
Document Number: 2014-20807
Type: Proposed Rule
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace and modify Class D and Class E airspace at Prescott, AZ, to accommodate aircraft departing and arriving under Instrument Flight Rules (IFR) at Ernest A. Love Field. New Area Navigation (RNAV) Global Positioning System (GPS) standard instrument approach procedures have made this action necessary for the safety and management of aircraft operations at the airport. The geographic coordinates of the airport also would be adjusted in the respective Class D and Class E airspace areas. This also would correct the airport name to Ernest A. Love Field.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-20725
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-20724
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-20723
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-20722
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-20721
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Aviation Rulemaking Advisory Committee; Meeting
Document Number: 2014-20720
Type: Notice
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of the ARAC.
Airspace Designations; Incorporation by Reference
Document Number: 2014-20692
Type: Rule
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This action amends Title 14 Code of Federal Regulations (14 CFR) part 71 relating to airspace designations to reflect the approval by the Director of the Federal Register of the incorporation by reference of FAA Order 7400.9Y, Airspace Designations and Reporting Points. This action also explains the procedures the FAA will use to amend the listings of Class A, B, C, D, and E airspace areas; air traffic service routes; and reporting points incorporated by reference.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2014-20686
Type: Rule
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2014-20659
Type: Rule
Date: 2014-09-02
Agency: Federal Aviation Administration, Department of Transportation
This rule amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.