Federal Aviation Administration October 2013 – Federal Register Recent Federal Regulation Documents

Results 51 - 100 of 121
Change of Using Agency for Restricted Areas R-2309 and R-2312, AZ
Document Number: 2013-25210
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action updates the name of the using agency for Restricted Areas R-2309 and R-2312 located in Arizona. This is an administrative change only, requested by the Department of the Air Force, and does not affect the boundaries; designated altitudes; times of designation; or activities conducted within the affected restricted areas.
Amendment of Restricted Area R-2515; Muroc Lake, CA
Document Number: 2013-25209
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action changes the using agency name for Restricted Area R-2515 Muroc Lake, CA, to read ``Commander, 412th Test Wing (412 TW) Edwards AFB, CA'' due to Department of the Air Force organizational realignments. There are no changes to the boundaries; designated altitudes; time of designation; or activities conducted within the restricted area.
Change of Using Agency for Restricted Areas R-2916, FL and R-7105, PR
Document Number: 2013-25207
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action updates the name of the using agencies for Restricted Areas R-2916, FL and R-7105, PR, at the request of the Department of the Air Force. This is an administrative change only and does not affect the boundaries; designated altitudes; time of designation; or activities conducted within the affected restricted areas.
Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Sidestick Controllers
Document Number: 2013-25206
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated with sidestick controllers. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Change of Using Agency for Restricted Areas R-5115, NM, and R-6316, R-6317, and R-6318, TX
Document Number: 2013-25205
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action updates the name of the using agencies for Restricted Areas R-5115 in New Mexico and R-6316, R-6317, and R-6318 in Texas at the request of the Department of the Air Force. This is an administrative change only and does not affect the boundaries; designated altitudes; times of designation; or activities conducted within the affected restricted areas.
Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Flight Envelope Protection: Normal Load Factor (g) Limiting
Document Number: 2013-25204
Type: Proposed Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated with an electronic flight control system that prevents the pilot from inadvertently or intentionally exceeding the positive or negative airplane limit load factor. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Modification of Restricted Areas R-6901A & R-6901B; Fort McCoy, WI
Document Number: 2013-25203
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action amends Restricted Areas R-6901A and R-6901B, Fort McCoy, WI, to accurately identify the segment of Wisconsin State Highway 21 used to identify the shared boundary between the restricted areas. The geographic coordinates contained in the existing legal descriptions for defining the highway actually plot south of it. This is an administrative correction to accurately define the geographic coordinates where the restricted area boundaries intercept Wisconsin State Highway 21 and does not affect the overall restricted area boundaries; designated altitudes; times of designation; or activities conducted within the restricted areas.
Airworthiness Directives; Costruzioni Aeronautiche Tecnam srl Airplanes
Document Number: 2013-25137
Type: Proposed Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Costruzioni Aeronautiche Tecnam srl Model P2006T airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks of the nose landing gear (NLG) lower link. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2013-25134
Type: Proposed Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This proposed AD was prompted by reports of severe corrosion on bonding jumpers installed on the flight control surfaces. This proposed AD would require repetitive bonding jumper inspections for corrosion, sealant disbond, and insufficient sealant coverage, and corrective actions if necessary. This proposed AD also specifies an optional action of doing an inspection for corrosion damage of the bonding brackets, and corrective actions if necessary, which would terminate the repetitive inspections. For certain airplanes, this proposed AD would also require installing certain bonding jumpers and related ground clips and fasteners to the elevators, horizontal stabilizers, rudder, and vertical fin, removing certain bonding jumpers and installing new bonding jumpers, and replacing single-tabbed brackets with two-tabbed brackets. We are proposing this AD to detect and correct corrosion on bonding jumpers installed on the flight control surfaces, which, in the event of a lighting strike, could damage the actuator control electronics (ACEs) and result in the loss of the ability to command individual flight control surfaces or cause uncommanded motion of individual flight control surfaces.
Airworthiness Directives; Hamilton Standard Division and Hamilton Sundstrand Corporation Propellers
Document Number: 2013-25108
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all Hamilton Standard Division model 6/5500/F and 24PF and Hamilton Sundstrand Corporation model 14RF, 14SF, 247F, and 568F series propellers. A maintenance manual number in paragraph (g) of the Compliance section is incorrect. This document corrects that error. In all other respects, the original document remains the same.
Noise Exposure Map Notice for Bob Hope Airport, Burbank, California
Document Number: 2013-24991
Type: Notice
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
The FAA announces its determination that the noise exposure maps submitted by Burbank-Glendale-Pasadena Airport Authority, for Bob Hope Airport under the provisions of 49 U.S.C. 47501 et. seq (Aviation Safety and Noise Abatement Act) and 14 CFR Part 150 are in compliance with applicable requirements.
Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Airplane Electronic System Security Protection From Unauthorized External Access
Document Number: 2013-24989
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated with the architecture and connectivity capabilities of the airplanes' computer systems and networks, which may allow access to or by external computer systems and networks. Connectivity to, or access by, external systems and networks may result in security vulnerabilities to the airplanes' systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Embraer S.A., Model EMB-550 Airplanes; Isolation or Airplane Electronic System Security Protection From Unauthorized Internal Access
Document Number: 2013-24987
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Embraer S.A. Model EMB-550 airplane. This airplane will have a novel or unusual design feature associated with connectivity of the passenger domain computer systems to the airplane critical systems and data networks. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Modification of Class B Airspace; Minneapolis, MN
Document Number: 2013-24983
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Minneapolis, MN, Class B airspace area to contain large turbine-powered aircraft conducting published instrument procedures at the Minneapolis-St. Paul International Airport (MSP), MN, within Class B airspace. The FAA is taking this action to ensure containment of aircraft being vectored to and conducting dual Simultaneous Instrument Landing System (SILS) approaches to parallel Runways 12L/R and 30L/R; aircraft being vectored to and conducting approaches to Runway 35; and, aircraft being re-sequenced from approaches to Runway 35 to approaches to Runway 30L. This action supports the FAA's national airspace redesign goal of optimizing terminal and en route airspace areas to enhance safety, improving the flow of air traffic, and reducing the potential for near midair collision in terminal airspace areas.
Amendment of Class D Airspace; Kwajalein Island, Marshall Islands, RMI
Document Number: 2013-24976
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
This action amends the Kwajalein Island Class D airspace description by amending the geographic coordinates for Bucholz Army Airfield (AAF), Kwajalein Island, Marshall Islands, RMI. The Bucholz AAF geographic coordinates information was updated in the Kwajalein Island Class E airspace descriptions in 2011, but was inadvertently overlooked in the Kwajalein Island Class D airspace description. This action ensures the safety of aircraft operating in the Kwajalein Island airspace area. This is an administrative action and does not affect the operating requirements of the airspace.
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
Document Number: 2013-24961
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2009-05-09 for Bell Model 412, 412CF, and 412EP helicopters. AD 2009-05-09 required reidentifying each affected part-numbered main rotor yoke (yoke) on its data plate, reducing the retirement life of the reidentified yoke, and revising the Airworthiness Limitations section of the maintenance manual or the Instructions for Continued Airworthiness (ICAs) accordingly. This new AD retains the requirements of AD 2009-05-09 with the exception of the P/N marking location. This AD was prompted by fatigue analysis that shows the retirement life should be reduced on certain yokes. We are issuing this AD to correct the unsafe condition on these helicopters.
Airworthiness Directives; AgustaWestland S.p.A. (Agusta) Helicopters
Document Number: 2013-24937
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Agusta Model A109A, A109A II, A109C, A109E, A109K2, A109S, AW109SP, A119, and AW119 MKII helicopters. The emergency AD was sent previously to all known U.S. owners and operators of these helicopters. This AD requires, before further flight, inspecting certain Thomas coupling nuts on the tail rotor drive shaft line for a crack and replacing all the nuts if any nut is cracked. Also this AD requires replacing all affected Thomas coupling nuts within 10 hours time-in-service (TIS) or 30 days, whichever occurs first. This AD was prompted by two incidents of cracking on the nuts that connect the flexible disc coupling (Thomas coupling) with the splined adapter on the tail rotor drive shaft. We are issuing this AD to correct the unsafe condition on these helicopters.
Airworthiness Directives; Eurocopter France (Eurocopter) Helicopters
Document Number: 2013-24816
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Eurocopter Model AS350B, AS350BA, AS350B1, AS350B2, AS350B3, AS350C, AS350D, AS350D1, AS355E, AS355F, AS355F1, AS355F2, AS355N, and AS355NP helicopters. This AD requires certain inspections of each tail rotor pitch horn assembly (pitch horn) for a crack, and if there is a crack, before further flight, replacing the pitch horn with an airworthy pitch horn. This AD is prompted by a report of a crack in the yoke of a pitch horn. These actions are intended to detect a crack in the pitch horn to prevent failure of the pitch horn, loss of the anti-torque function, and subsequent loss of control of the helicopter.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2013-24812
Type: Rule
Date: 2013-10-25
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8F and 747-8 series airplanes. This AD requires a detailed inspection of the power control actuator (PCA) installation to determine if a bushing is installed, a general visual inspection between the horizontal stabilizer rear spar and the elevator front spar and between certain stabilizer stations for defects and damage, and corrective actions if necessary. This AD was prompted by a report of unusual noise coming from the left inboard elevator during a functional check of the ram air turbine system, and a determination that a bushing was not installed. We are issuing this AD to detect and correct non-installation of bushings. If the bushings are not present, the stiffness of the load path will be decreased, which will cause wear of adjacent parts and increased freeplay of the elevator surfaces. Freeplay that exceeds acceptable limits could result in divergent flutter for certain maneuvers, which could lead to loss of controllability of the airplane.
Notice of Request To Release Airport Property at Charleston International Airport, Charleston, South Carolina
Document Number: 2013-24985
Type: Notice
Date: 2013-10-24
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is considering a request to release and authorize the sale of three parcels totaling 266.954-acres of airport property located at the Charleston International Airport, Charleston, South Carolina, and invites public comment on this notice. The three parcels of airport property are planned to be sold by the Charleston County Aviation Authority for the proposed use of aircraft manufacturing. Currently, ownership of the property provides for protection of FAR Part 77 surfaces and compatible land use which would continue to be protected with deed restrictions required in the transfer of land ownership.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24975
Type: Proposed Rule
Date: 2013-10-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of cracks found in the aft support fitting, the rear spar upper chord, and the rear spar web. This proposed AD would require repetitive inspections for cracking of the aft support fitting for the main landing gear (MLG) beam, and the rear spar upper chord and rear spar web in the area of rear spar station (RSS) 224.14; and repair if necessary. We are proposing this AD to detect and correct such cracks, which could grow and result in a fuel leak and possible fire.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Human Response to Aviation Noise in Protected Natural Areas Survey
Document Number: 2013-24967
Type: Notice
Date: 2013-10-24
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on July 31, 2013, vol. 78, no. 147, page 46404. This research is important for establishing the scientific basis for air tour management policy decisions in the National Parks as mandated by the National Parks Air Tour Management Act of 2000.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Service Difficulty Report
Document Number: 2013-24965
Type: Notice
Date: 2013-10-24
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval for to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 27, 2013, vol. 78, no. 124, page 38795. The collection involves requirements for operators and repair stations to report any malfunctions and defects to the Administrator.
Airworthiness Directives; Eurocopter France Helicopters
Document Number: 2013-24942
Type: Proposed Rule
Date: 2013-10-24
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for Eurocopter France Model AS332C, AS332L, AS332L1, AS332L2, EC225LP, and SA330J helicopters with a certain tail rotor control turnbuckle (turnbuckle) installed. This proposed AD would require inspecting the turnbuckles for corrosion or a crack, and depending on the results, either replacing the turnbuckle or treating the turnbuckle for corrosion. This proposed AD is prompted by a report that a turnbuckle had failed because of corrosion. The proposed actions are intended to detect corrosion or a crack on a turnbuckle and prevent the failure of a turnbuckle, loss of control of the tail rotor and subsequent loss of control of the helicopter.
Amendment of Class E Airspace; St. George, UT
Document Number: 2013-24702
Type: Rule
Date: 2013-10-24
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class E airspace at St. George Municipal Airport, St. George, UT, by removing the operating hours established by a Notice to Airmen (NOTAM) due to the airport changing from a part time to a full time facility. This improves the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Third Meeting: RTCA Tactical Operations Committee (TOC)
Document Number: 2013-24968
Type: Notice
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the third meeting of the RTCA Tactical Operations Committee.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24797
Type: Proposed Rule
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
The FAA withdraws a notice of proposed rulemaking (NPRM) that proposed a new airworthiness directive (AD) for certain The Boeing Company Model 767 airplanes equipped with General Electric Model CF6- 80C2 engines. The NPRM proposed to require modifying a relay installation and associated wiring of the engine cowl anti-ice system and performing a functional test of the thrust reverser system. The NPRM also proposed to require replacing the operational program software of certain indicating/recording systems. Since we issued the NPRM, we have received new data that indicate the unsafe condition would not be adequately addressed by the proposed action. The manufacturer has issued new service information to address the unsafe condition. Consequently, we issued new rulemaking action that positively addresses the unsafe condition identified in the NPRM, and eliminates the need for the actions proposed in the NPRM. Accordingly, the NPRM is withdrawn.
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2013-24795
Type: Proposed Rule
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Fokker Services B.V. Model F.28 Mark 0070 and 0100 airplanes. This proposed AD was prompted by an evaluation by the design approval holder (DAH) indicating that the butt-joints on the forward fuselage above the passenger door are subject to widespread fatigue damage (WFD). This proposed AD would require inspecting the forward fuselage butt-joints for cracking, repairing any crack, and eventually doing a terminating repair. We are proposing this AD to prevent fatigue cracking of such butt-joints, which could result in reduced structural integrity of the airplane and in-flight decompression of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24794
Type: Proposed Rule
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777F series airplanes. This proposed AD was prompted by a report of a fire that originated near the first officer's seat and caused extensive damage to the flight deck. This proposed AD would require replacing the low-pressure oxygen hoses with non-conductive low-pressure oxygen hoses in the stowage box and supernumerary ceiling area. We are proposing this AD to prevent electrical current from passing through an internal, anti-collapse spring of the low-pressure oxygen hose, which can cause the low- pressure oxygen hose to melt or burn and lead to an oxygen-fed fire on the flight deck.
Public Notice for Waiver of Aeronautical Land-Use Assurance
Document Number: 2013-24738
Type: Notice
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
The FAA is considering a proposal to change a portion of airport land from aeronautical use to non-aeronautical use and to authorize the sale of airport property located at French Lick Airport, French Lick, Indiana. The aforementioned land is not needed for aeronautical use. The proposal consists of 18.606 acres located in the southern section of airport property which is not being used by the airport presently. The land is to be sold to Commissioners of Orange County for the construction of County Road CR 300 South/Airport Road to facilitate access to the airport.
Interim Policy, FAA Review of Solar Energy System Projects on Federally Obligated Airports
Document Number: 2013-24729
Type: Notice
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
This notice establishes interim FAA policy for proposals by sponsors of federally obligated airports to construct solar energy systems on airport property. FAA is adopting an interim policy because it is in the public interest to enhance safety by clarifying and adding standards for measuring ocular impact of proposed solar energy systems which are effective upon publication. FAA will consider comments and make appropriate modifications before issuing a final policy. The policy applies to any proposed on-airport solar energy system that has not received from the FAA either an unconditional airport layout plan approval or a ``no objection'' finding on a Notice of Proposed Construction or Alteration Form 7460-1.
Exhaust Emissions Standards for New Aircraft Gas Turbine Engines and Identification Plate for Aircraft Engines
Document Number: 2013-24713
Type: Rule
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
On December 31, 2012, the FAA published a final rule with a request for comments amending the emission standards for turbine engine powered airplanes to incorporate the standards that were promulgated by the United States Environmental Protection Agency (EPA) on June 18, 2012. The FAA's final rule fulfilled its requirements under the Clean Air Act Amendments of 1970 to issue regulations ensuring compliance with the EPA standards. Although the public had an opportunity to comment on the EPA's rule, and the FAA adopted the same requirements, the FAA sought public comment on its final rule. This action addresses the comments the FAA received.
Exhaust Emissions Standards for New Aircraft Gas Turbine Engines and Identification Plate for Aircraft Engines
Document Number: 2013-24712
Type: Rule
Date: 2013-10-23
Agency: Federal Aviation Administration, Department of Transportation
The FAA is making technical changes to a final rule published in the Federal Register on December 31, 2012. That final rule amended the emission standards for certain turbine engine powered airplanes to incorporate the standards promulgated by the United States Environmental Protection Agency (EPA) on June 18, 2012. The final rule contained six minor technical errors: One in the authority citation, and five in tables listing the emissions standards for engines manufactured on and after July 18, 2012. In addition, we are correcting an error in a definition that existed before the final rule and was overlooked. The FAA is issuing this technical amendment to correct these errors.
Proposed Establishment of Class E Airspace, Amendment of Class D and Class E Airspace, and Revocation of Class E Airspace; Salinas, CA
Document Number: 2013-24744
Type: Proposed Rule
Date: 2013-10-22
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Class E airspace and modify Class E airspace at Salinas, CA, to accommodate aircraft departing and arriving under Instrument Flight Rules (IFR) at Salinas Municipal Airport. This action also would remove Class E airspace designated as surface area. The geographic coordinates of the airport also would be adjusted in the respective Class D and Class E airspace areas. This action, initiated by the biennial review of the Salinas airspace area, would enhance the safety and management of aircraft operations at the airport.
Special Conditions: Learjet Model 35, 35A, 36, and 36A Airplanes; Rechargeable Lithium-Ion Batteries and Battery Systems
Document Number: 2013-24727
Type: Proposed Rule
Date: 2013-10-22
Agency: Federal Aviation Administration, Department of Transportation
This action proposes special conditions for the Learjet Model 35, 35A, 36, and 36A airplanes. These airplanes, as modified by Peregrine, 13000 E. Control Tower Road, Unit K-4, Englewood, CO, 80112, will have a novel or unusual design feature associated with rechargeable lithium-ion batteries and battery systems. These batteries have certain failure, operational, and maintenance characteristics that differ significantly from those of the nickel-cadmium and lead-acid rechargeable batteries currently approved for installation on large transport-category airplanes. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Schedule of Charges Outside the United States
Document Number: 2013-24224
Type: Notice
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) is announcing the availability of Advisory Circular (AC) 187-1G which transmits an updated schedule of charges for services of FAA Flight Standards Aviation Safety Inspectors outside the United States. The advisory circular has been updated in accordance with the procedures listed in 14 CFR Part 187, Appendix A.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2013-24216
Type: Proposed Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 2000 and FALCON 2000EX airplanes. This proposed AD was prompted by a determination that new center of gravity (CG) limits applicable during takeoff with a Slat/ Flap SF2 setting are necessary. This proposed AD would require revising the airplane flight manual (AFM) to include procedures to advise the flightcrew of the new CG limits. We are proposing this AD to prevent an erratic takeoff path and consequent reduced controllability of the airplane.
Establishment of Class E Airspace; Comanche, TX
Document Number: 2013-24149
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace at Comanche, TX. Controlled airspace is necessary to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAP) at Comanche County-City Airport. The FAA found that SIAPs were established for the airport in 2006, but the Class E airspace area to contain it was never established, thereby prohibiting certain aircraft from using the procedures. This seriously impacts the safety and management of instrument flight rules (IFR) operations at the airport. As a result, a Notice to Airmen (NOTAM) has been issued suspending the use of the procedures until the Class E airspace area is established.
Seventy-Sixth Meeting: RTCA Special Committee 147, Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment
Document Number: 2013-24148
Type: Notice
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the Seventy-Sixth meeting of RTCA Special Committee 147, Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment.
Fourteenth Meeting: RTCA Special Committee 222, Inmarsat AMS(R)S
Document Number: 2013-24147
Type: Notice
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of the fourteenth meeting of the RTCA Special Committee 222, Inmarsat AMS(R)S
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24105
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model DC-10-10 and MD-10-10F airplanes. This AD was prompted by a report that the safe life limit on certain main landing gear (MLG) upper torque link bolts is reduced significantly due to those bolts being fabricated from bar stock with a machined head instead of from a forged blank with an upset head. This AD requires replacing certain MLG upper torque link bolts with new or serviceable parts. We are issuing this AD to prevent damage to the MLG and consequent damage to airplane structure, which could adversely affect the airplane's continued safe flight and landing.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-23898
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 767 airplanes. This AD was prompted by reports of cracks and heat damage on pivot joint components found during main landing gear (MLG) overhaul. This AD requires, for certain airplanes, repetitive inspections of the MLG pivots, truck beam bushings, and inner cylinder bushings. For all airplanes, this AD requires a maintenance program revision, one-time inspections of the MLG truck beam, and related investigative and corrective actions (including configuration changes) if necessary; accomplishment of these actions terminates the repetitive inspections. We are issuing this AD to detect and correct heat damage and cracks in the pivot pin, truck beam lugs, and inner cylinder lugs, which could result in fracture of the pivot joint components and consequent MLG collapse.
Airworthiness Directives; Bombardier, Inc. Airplanes
Document Number: 2013-23890
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL-215-6B11 (CL-415 Variant) airplanes. This AD requires replacing the panel assembly of the main distribution center (MDC) rack. This AD was prompted by findings of chafed power wires due to flexing of the MDC rack panel. We are issuing this AD to prevent damage to power wires, which could cause simultaneous loss of systems such as electrical power, pilot indications, and caution/advisory lighting systems, which are essential for safe flight.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-23462
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a new revision to the airworthiness limitations of the maintenance planning data (MPD) document. This AD requires revising the maintenance program to update inspection requirements to detect fatigue cracking of principal structural elements (PSEs). We are issuing this AD to detect and correct fatigue cracking of various principal structural elements (PSEs), which could adversely affect the structural integrity of these airplanes.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Document Number: 2013-23452
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211-535E4-B-37 series turbofan engines. This AD requires removal of affected parts using a drawdown plan. This AD was prompted by recalculating the lives of certain rotating life limited parts (LLPs) operated to certain flight profiles. We are issuing this AD to prevent the failure of rotating LLPs, which could result in uncontained failure of the engine and damage to the airplane.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Document Number: 2013-23448
Type: Rule
Date: 2013-10-03
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Rolls-Royce plc (RR) RB211-535E4-37, RB211-535E4-B-37, RB211-535E4-C- 37, and RB211-535E4-B-75 turbofan engines. This AD requires removal of affected parts using a drawdown plan. This AD was prompted by RR updating the low-cycle-fatigue life analysis for the low pressure turbine (LPT) stage 2 discs. We are issuing this AD to prevent LPT stage 2 disc failure, which could result in uncontained engine damage and damage to the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24121
Type: Proposed Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. This proposed AD was prompted by reports of cracking found in the skin at the lower aft corner of the forward entry doorway on airplanes that do not have an airstair door cutout. This proposed AD would require repetitive inspections for cracking in the lower corners of the forward entry doorway on airplanes that do not have an airstair door cutout, and repair if necessary. We are proposing this AD to detect and correct cracking in the lower corners of the forward entry doorway, which could lead to crack progression and consequent rapid decompression of the airplane.
Airworthiness Directives; Bombardier Inc., Airplanes
Document Number: 2013-24077
Type: Proposed Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes. This proposed AD results from fuel system reviews conducted by the manufacturer. This proposed AD would require accomplishing modifications to the fuel system. We are proposing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2013-24058
Type: Proposed Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposed airworthiness directive (AD) for all Airbus Model A330-200, -300 and -200 Freighter series airplanes, and Model A340-200, -300, -500, and -600 series airplanes. The NPRM proposed to require, for certain airplanes, revising the airplane flight manual (AFM) to advise the flight crew of emergency procedures for addressing Angle of Attack (AOA) sensor blockage. The NPRM also proposed to mandate replacing the AOA sensor conic plates with AOA sensor flat plates, which is a terminating action for the AFM revision. The NPRM was prompted by a report that an airplane equipped with AOA sensors installed with conic plates recently experienced blockage of all sensors during climb, leading to autopilot disconnection and activation of the alpha protection (Alpha Prot) when Mach number was increased. For certain airplanes, this action revises the NPRM by adding a modification of the installation of certain AOA sensor flat plates. We are proposing this AD to prevent reduced control of the airplane. Since these actions impose an additional burden over that proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24040
Type: Proposed Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede airworthiness directive (AD) 2005-07- 12 that applies to certain The Boeing Company Model 737-100, -200, - 200C, -300, -400, and -500 series airplanes. AD 2005-07-12 requires detailed and eddy current inspections to detect cracking of the frame web around the cutout for the doorstop intercostal strap at the aft side of the station (STA) 291.5 frame at stringer 16R, and corrective action if necessary. Since we issued AD 2005-07-12, we received reports of new findings of cracking at various locations of the STA 277 to STA 291.5 frames and intercostals, including webs, chords, clips, and shear ties, between stringers 7R and 17R. This proposed AD would add new inspections for cracking at the forward galley door cutout, and corrective actions if necessary. This proposed AD would also reduce a certain inspection threshold required by AD 2005-07-12. We are proposing this AD to detect and correct fatigue cracking of the aft frame and frame support structure of the forward galley door, which could result in a severed fuselage frame web, rapid decompression of the airplane, and possible loss of the forward galley door.