Federal Aviation Administration October 2013 – Federal Register Recent Federal Regulation Documents

Results 101 - 121 of 121
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24034
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are superseding airworthiness directive (AD) 2004-18-06 for certain The Boeing Company Model 737-200, -200C, -300, -400, and -500 series airplanes. AD 2004-18-06 required repetitive inspections to find fatigue cracking of certain upper and lower skin panels of the fuselage, and follow-on and corrective actions if necessary. AD 2004- 18-06 also included a terminating action for the repetitive inspections of certain modified or repaired areas only. This new AD adds new inspections for cracking of the fuselage skin along certain chem-milled lines, and corrective actions if necessary. This new AD also reduces certain thresholds and intervals required by AD 2004-18-06. This AD was prompted by new findings of vertical cracks along chem-milled steps adjacent to the butt joints. We are issuing this AD to detect and correct fatigue cracking of the skin panels, which could result in sudden fracture and failure of the skin panels of the fuselage, and consequent rapid decompression of the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24031
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-300, 747-400, 747-400D, and 747SP series airplanes. This AD was prompted by reports of worn or incorrectly assembled latches on main deck escape slides installed on airplane doors. This AD requires determining if the latches are correctly assembled; and doing corrective actions if necessary. This AD also requires, for certain airplanes, modifications to the escape slide/rafts and escape slides. We are issuing this AD to prevent a latch hook moving from closed to open in an escape slide/raft or escape slide, which could result in the escape slide/raft or escape slide not deploying correctly in an emergency, or releasing/inflating into the passenger cabin and causing injury to passengers and crew.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-24029
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-100, -100B, -100B SUD, -200B, -200C, - 200F, -300, -400, -400D, -400F, and 747SR series airplanes. This AD was prompted by reports of cracking at the aft upper corner of the main entry door (MED) 5 cutout. This AD requires inspecting for the presence of repairs and measuring the edge margin at certain fastener locations around the upper aft corner of the door cutout, inspecting for any cracking of the fuselage skin assembly and bear strap in the aft upper corner area of the door cutout, and repairing or modifying the fuselage skin assembly and bear strap if necessary. We are issuing this AD to detect and correct cracking of the skin and bear straps at the aft upper corner of the MED 5 cutout, which could result in in-flight depressurization.
Petition for Exemption; Summary of Petition Received
Document Number: 2013-23994
Type: Notice
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (CFR) part 25. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2013-23975
Type: Notice
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Amendment of Class E Airspace; Mandan, ND
Document Number: 2013-23950
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
This action amends Class E airspace at Mandan, ND. Additional controlled airspace is necessary to accommodate new Area Navigation (RNAV) Standard Instrument Approach Procedures at Mandan Municipal Airport. The airport's geographic coordinates are also adjusted. This action enhances the safety and management of Instrument Flight Rule (IFR) operations at the airport.
Aviation Rulemaking Advisory Committee Meeting on Transport Airplane and Engine Issues
Document Number: 2013-23940
Type: Notice
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the rescheduling of a public meeting of the FAA's Aviation Rulemaking Advisory Committee (ARAC) Transport Airplane and Engine (TAE) Subcommittee to discuss TAE issues. A number of issues have arisen that may affect the Committee's ability to have an effective meeting on October 2, 2013, including uncertainty regarding Federal Government shutdown and travel.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
Document Number: 2013-23439
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters to require modifying the No. 1 engine forward firewall center fire extinguisher discharge tube (No. 1 engine tube) and inspecting the outboard discharge tube to determine if it is correctly positioned. This AD was prompted by the discovery that the No. 1 engine tube installed on the helicopters is too long to ensure that a fire could be effectively extinguished in the helicopter. The actions are intended to ensure the No. 1 engine tube allows for complete coverage of an extinguishing agent in the No. 1 engine compartment area, ensure that a fire would be extinguished and prevent the loss of helicopter control.
Airworthiness Directives; Rolls-Royce plc Turbofan Engines
Document Number: 2013-23432
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are superseding airworthiness directive (AD) AD 2012-04-13, for all Rolls-Royce plc (RR) model RB211 Trent 553-61, 553A2-61, 556- 61, 556A2-61, 556B-61, 556B2-61, 560-61, and 560A2-61; and RB211 Trent 768-60, 772-60, and 772B-60; and RB211-Trent 875-17, 877-17, 884-17, 884B-17, 892-17, 892B-17, and 895-17; and RB211-524G2-T-19, -524G3-T- 19, -524H-T-36, and -524H2-T-19 turbofan engines that have a high- pressure (HP) compressor stage 1 to 4 rotor disc installed, with a certain part number (P/N) installed. AD 2012-04-13 required repetitive inspections of the axial dovetail slots and follow-on corrective action depending on findings. This new AD expands the population of affected parts. This AD also changes, for the purposes of this AD, the definition of ``engine shop visit.'' This AD was prompted by reports of additional affected HP compressor rotor discs that require the same action. We are issuing this AD to detect cracks in the HP compressor stage 1 and 2 disc posts, which could result in failure of the disc post and HP compressor blades, damage to the engine, and damage to the airplane.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-23321
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 717-200 airplanes. This AD was prompted by multiple reports of cracks of overwing frames. This AD requires repetitive inspections for cracking of the overwing frames, and corrective actions if necessary. We are issuing this AD to detect and correct such cracking that could sever a frame, which may increase the loading of adjacent frames, and result in damage to the adjacent structure and consequent loss of structural integrity of the airplane.
Airworthiness Directives; Eurocopter France (Eurocopter) Helicopters
Document Number: 2013-23092
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Eurocopter Model SA-365N, SA-365N1, AS-365N2, AS 365 N3, EC 155B, EC155B1, AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters with certain EADS Sogerma pilot and co-pilot seats installed. This AD requires inspecting the rear beam of each seat to determine if all of the weld beads are present and replacing the seat if any weld bead is missing. This AD is prompted by a maintenance inspection that discovered a missing weld bead on the rear beam of a pilot seat. These actions are intended to prevent failure of the pilot and co-pilot seats and subsequent injury to the pilot or co-pilot.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2013-23084
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 727 airplanes; Model 737-100, -200, and -200C series airplanes; and Model 747-100, -100B, -100B SUD, -200B, -200C, - 200F, -300, -400, -400D, -400F, 747SR, and 747SP series airplanes. This AD was prompted by a report of an activation of the control column shaker during takeoff. This AD requires performing a general visual inspection to determine if a certain angle of attack (AOA) sensor with a paddle type vane is installed, and, for affected sensors, performing an operational test of the stall warning system, and replacing the AOA sensor with a new sensor if necessary. We are issuing this AD to prevent erroneous activation of the control column shaker during takeoff, which could result in runway overrun, failure to clear terrain or obstacles after takeoff, or reduced controllability of the airplane.
Airworthiness Directives; Airbus Airplanes
Document Number: 2013-23079
Type: Rule
Date: 2013-10-02
Agency: Federal Aviation Administration, Department of Transportation
We are superseding airworthiness directive (AD) 2012-26-51 for all Airbus Model A318, A319, A320, and A321 series airplanes. AD 2012- 26-51 required revising the airplane flight manual (AFM) to advise the flightcrew of emergency procedures for addressing angle of attack (AoA) sensor blockage, and also provided for optional terminating action for the AFM revision, which involves replacing AoA sensor conic plates with AoA sensor flat plates. This new AD requires replacing AoA sensor conic plates with AoA sensor flat plates, and subsequent removal of the AFM revision. This AD was prompted by a determination that replacement of AoA sensor conic plates is necessary to address the identified unsafe condition. We are issuing this AD to prevent reduced control of the airplane.
Proposed Modification and Establishment of Restricted Areas; Aberdeen Proving Ground, MD
Document Number: 2013-23951
Type: Proposed Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish a new restricted area, designated R-4001C, within the existing restricted areas R-4001A and R- 4001B, at the U.S. Army's Aberdeen Proving Ground in Maryland. The purpose of the proposed R-4001C is to contain two moored balloons, called Aerostats that would be airborne continuously at approximately 10,000 feet MSL. This action would segregate nonparticipating aircraft from a hazard to navigation in the Aberdeen Proving Ground airspace.
Proposed Amendment of Class E Airspace; Georgetown, TX
Document Number: 2013-23949
Type: Proposed Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E airspace at Georgetown, TX. Decommissioning of the Georgetown radio beacon (RBN) at Georgetown Municipal Airport has made reconfiguration necessary for standard instrument approach procedures and for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Proposed Amendment of Class E Airspace; Lawrenceville, IL
Document Number: 2013-23948
Type: Proposed Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E airspace at Lawrenceville, IL. Decommissioning of the Mount Carmel nondirectional radio beacon (NDB) at Mount Carmel Municipal Airport has made reconfiguration necessary for standard instrument approach procedures and for the safety and management of Instrument Flight Rules (IFR) operations at the airport. Geographic coordinates would also be updated.
Proposed Amendment of Class E Airspace; Burnet, TX
Document Number: 2013-23943
Type: Proposed Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend Class E airspace at Burnet, TX. Decommissioning of the Burnet nondirectional radio beacon (NDB) at Burnet Municipal AirportKate Craddock Field has made reconfiguration necessary for standard instrument approach procedures and for the safety and management of Instrument Flight Rules (IFR) operations at the airport.
Airworthiness Directives; Eurocopter France (Eurocopter) Helicopters
Document Number: 2013-23580
Type: Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Eurocopter Model AS332C, AS332L, AS332L1, AS332L2, and EC225LP helicopters. This AD requires replacing certain serial-numbered main gearbox (MGB) bevel gear vertical shafts because they are no longer airworthy. Also, this AD requires certain inspections of each MGB bevel gear vertical shaft (shaft) for a crack. Also, this AD requires if there is a crack, replacing the shaft with an airworthy part before further flight. This AD is prompted by two incidents of emergency ditching after warning indications of loss of MGB oil pressure. These actions are intended to detect a cracked shaft, which could result in loss of MGB oil pressure, loss of the MGB lubrication system, and subsequent loss of control of the helicopter.
Airworthiness Directives; AgustaWestland S.p.A. (Agusta) Helicopters
Document Number: 2013-23578
Type: Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Agusta Model AB139 and AW139 helicopters. This AD requires deactivating the Full Icing Protection System (FIPS) and installing a placard next to the FIPS controller stating that flight into known icing is prohibited. This AD is prompted by a report of a fire in the aft avionics bay and the baggage compartment resulting from an Auto Transformer Rectifier Unit internal circuit overload. These actions are intended to prevent a fire, structural damage, and subsequent loss of control of the helicopter.
Airworthiness Directives; Bell Helicopter Textron, Inc., Helicopters
Document Number: 2013-23099
Type: Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron, Inc. (Bell), Model 214B, 214B-1, and 214ST helicopters. This AD requires creating a component history card or equivalent record for certain pylon support spindle assemblies (spindles), establishes a new retirement life for spindles installed on Model 214B and 214B-1 helicopters, reduces the retirement life for spindles installed on Model 214ST helicopters, and requires replacing any spindle that has reached its airworthiness retirement life. This AD was prompted by three in-flight failures of the spindle that resulted in forced landings. The actions of this AD are intended to prevent failure of a spindle and subsequent loss of control of the helicopter.
Airworthiness Directives; Robinson Helicopter Company (Robinson)
Document Number: 2013-23094
Type: Rule
Date: 2013-10-01
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Robinson Model R22, R22 Alpha, R22 Beta, and R22 Mariner helicopters with certain fuel shut-off valves installed. This AD requires replacing the fuel shut-off valve with a newer design fuel shut-off valve. This AD is prompted by three accidents that occurred because the fuel shut- off valve was inadvertently moved to the ``off'' position. These actions are intended to prevent inadvertent closing of the fuel valve, which could result in engine power loss from which a safe landing may not be possible.