Federal Aviation Administration February 2007 – Federal Register Recent Federal Regulation Documents

Results 51 - 100 of 141
Airworthiness Directives; Raytheon Aircraft Company 65, 90, 99, 100, 200, and 1900 Series Airplanes, and Models 70 and 300 Airplanes
Document Number: E7-2754
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
This document makes a correction to Airworthiness Directive (AD) 2004-23-02, which was published in the Federal Register on November 9, 2004 (69 FR 64842), and applies to all Raytheon Aircraft Company (Raytheon) 65, 90, 99, 100, 200, and 1900 series airplanes and Models 70 and 300 airplanes. AD 2004-23-2 requires repetitive inspections of the nose landing gear (NLG) fork for cracks with replacement if cracks are found (replacement terminates repetitive inspections). Current language in paragraph (e)(3) of AD 2004-23-02 references Part III of the Accomplishment Instructions of the service bulletin instead of Part II. This document corrects that paragraph by changing the reference from Part III to Part II.
Airworthiness Directives; Boeing Model 767 Airplanes
Document Number: E7-2644
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 767 airplanes. This AD requires an inspection of each main tank fuel boost pump for the presence of a pump shaft flame arrestor, and if the flame arrestor is missing, replacement of that pump with a pump having a pump shaft flame arrestor. This AD also requires repetitive measurements of the flame arrestor's position in the pump, and corrective actions if necessary. This AD also requires the replacement of the pump with a new or modified pump, which ends the repetitive measurements. This AD results from reports that certain fuel boost pumps may not have flame arrestors installed in the pump shaft and reports that the pin that holds the flame arrestor in place can break due to metal fatigue. We are issuing this AD to prevent the possible migration of a flame from a main tank fuel boost pump inlet to the vapor space of that fuel tank, and consequent ignition of fuel vapors, which could result in a fire or explosion.
Airworthiness Directives; Learjet Model 23, 24, 24A, 24B, 24B-A, 24C, 24D, 24D-A, 24E, 24F, 24F-A, 25, 25A, 25B, 25C, 25D, 25F, 28, 29, 31, 31A, 35, 35A (C-21A), 36, 36A, 55, 55B, and 55C Airplanes
Document Number: E7-2640
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Learjet Model 23, 24, 24A, 24B, 24B-A, 24C, 24D, 24D-A, 24E, 24F, 24F-A, 25, 25A, 25B, 25C, 25D, 25F, 28, 29, 31, 31A, 35, 35A (C- 21A), 36, 36A, 55, 55B, and 55C airplanes. This AD requires modifying the left- and right-hand standby fuel pump switches. This AD also requires revising the Emergency and Abnormal Procedures sections of the airplane flight manual to advise the flightcrew of the proper procedures to follow in the event of failure of the standby fuel pump to shut off. This AD results from a report of inadvertent operation of a standby fuel pump due to an electrical system malfunction. We are issuing this AD to prevent this inadvertent operation, which could result in inadvertent fuel transfer by the left or right wing fuel system and subsequent over-limit fuel imbalance between the left and right wing fuel loads. This imbalance could affect lateral control of the airplane which could result in reduced controllability.
Airworthiness Directives; McDonnell Douglas Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, and DC-10-30F (KC-10A and KDC-10) Airplanes; Model DC-10-40 and DC-10-40F Airplanes Equipped With Pratt & Whitney JT9-20 or JT9-20J Engines; and Model MD-10-10F and MD-10-30F Airplanes
Document Number: E7-2639
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for the McDonnell Douglas airplanes previously described. This AD requires replacing the control modules of the fire detection systems of the propulsion engines with new, improved control modules. This AD results from a report of broken or severed wiring between engine fire detectors and the fire detection system control module, which caused the fire detection system to become non-functional without flightcrew awareness. We are issuing this AD to prevent unannunciated fire in a propulsion engine, which could cause injury to flightcrew and passengers or loss of the airplane.
Airworthiness Directives; Gippsland Aeronautics Pty. Ltd. Model GA8 Airplanes
Document Number: E7-2516
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 747-400 Series Airplanes
Document Number: E7-2511
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Boeing Model 747-400 series airplanes. That AD currently requires replacement of the decompression panels that are located in the smoke barrier between the passenger and main deck cargo compartment with new panels of an improved design. This new AD requires modification of the decompression panels on the smoke barrier in the main deck cargo compartment, or replacement of the smoke barrier with an improved smoke barrier, as applicable. This new AD also requires repetitive inspections of the decompression (vent) panels on the smoke barrier and corrective actions if necessary. This new AD also adds airplanes to the applicability. This AD results from reports of decompression panels on the smoke barrier opening in flight and on the ground without a decompression event. We are issuing this AD to prevent inadvertent opening or tearing of decompression panels, which could result in degraded cargo fire detection and suppression capability, smoke penetration into an occupied compartment, and an uncontrolled cargo fire, if a fire occurs in the main deck cargo compartment.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ, -135ER, -135KE, -135KL, and -135LR Airplanes; and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
Document Number: E7-2510
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for all EMBRAER airplanes as described previously. This AD requires inspecting to determine the part number of the left- and right-hand windshield temperature controllers. For airplanes equipped with certain windshield temperature controllers, this AD also requires replacing the attaching hardware of the power cable terminals of the windshield temperature controllers with new, improved attaching hardware; inspecting the power cable terminals for signs of melting or damage to the terminals, cable insulation, or plastic crimping ring; and performing corrective actions if necessary. This AD results from reports of smoke on the flight deck caused by damage from poor electrical contact due to loosening of the attaching hardware of the power cables of certain windshield temperature controllers. We are issuing this AD to prevent overheating of the power cable terminals of the windshield temperature controllers, which could result in smoke on the flight deck.
Airworthiness Directives; EADS SOCATA Model TBM 700 Airplanes
Document Number: E7-2507
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA adopts a new airworthiness directive (AD) for certain EADS SOCATA airplanes. This AD requires you to inspect the pilot door locking stop-fittings for correct length and, if any incorrect length pilot door locking stop-fittings are found, replace them. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for France. We are issuing this AD to detect and replace incorrect length pilot door locking stop- fittings. This condition, if not corrected, could result in depressurization of the airplane.
Airworthiness Directives; Sicma Aero Seat, Passenger Seat Assemblies
Document Number: E7-2506
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Sicma Aero Seat, passenger seat assemblies. This AD requires modifying the aft track fittings on these passenger seat assemblies by installing new tab locks, and then torquing the aft track fitting locking bolts. We are issuing this AD to prevent detachment of passenger seat assemblies, especially during emergency conditions, leading to occupant injury.
Airworthiness Directives; Short Brothers & Harland Ltd. Models SC-7 Series 2 and SC-7 Series 3 Airplanes
Document Number: E7-2505
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) to revise AD 2003-17-05, which applies to Short Brothers & Harland (Shorts) Models SC-7 Series 2 and SC-7 Series 3 airplanes. AD 2003-17-05 currently establishes a technical service life for these airplanes and allows you to incorporate modifications, inspections, and replacements of certain life limited items to extend the life limits of these airplanes. Since we issued AD 2003-17-05, Shorts Service Bulletin SB 51-51 was revised to Revision 8, dated July 5, 2006, and the European Aviation Safety Agency (EASA), which is the Technical Agent for the Member States of the European Community, issued an AD for the European Community to correct an unsafe condition for the specified product. AD 2003-17-05 contains conflicting information on the repetitive visual inspection requirement. Consequently, this AD would retain the technical service life for these airplanes; would continue to allow modifications, inspections, and replacements of certain life limited items to extend the life limits of these airplanes; and would clarify the repetitive visual inspection requirement between one of the service bulletins and the maintenance program if an operator chooses to extend the life limit. The actions specified by this AD are intended to clarify the inspection information to prevent failure of critical structure of the aircraft caused by fatigue.
Airworthiness Directives; EADS SOCATA Model TBM 700 Airplanes
Document Number: 07-670
Type: Rule
Date: 2007-02-16
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracks found on several main landing gear cylinders. We are issuing this AD to require actions to correct the unsafe condition on these products.
Airworthiness Directives; Cessna Model 500, 501, 550, 551, S550, 560, 560XL, and 750 Airplanes
Document Number: E7-2628
Type: Proposed Rule
Date: 2007-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Cessna Model 500, 550, S550, 560, 560XL, and 750 airplanes. The existing AD currently requires installing identification sleeves on the wires for the positive and negative terminal studs of the engine and/or auxiliary power unit (APU) fire extinguishing bottles, as applicable, and re-connecting the wires to the correct terminal studs. This proposed AD would retain the requirements of the existing AD; add airplanes to the applicability; and, for certain airplanes only, require a review of wiring changes made using the original issue of one service bulletin and corrective actions if necessary. This proposed AD results from a determination that additional airplanes are subject to the unsafe condition described in the existing AD. We are proposing this AD to ensure that the fire extinguishing bottles are activated in the event of an engine or APU fire, and that flammable fluids are not supplied during a fire, which could result in an unextinguished fire in the nacelle or APU.
Airworthiness Directives; General Electric Company (GE) CF6-80 Series Turbofan Engines
Document Number: E7-2625
Type: Proposed Rule
Date: 2007-02-15
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for GE CF6-80 series turbofan engines having fuel shroud retaining snap rings, part number (P/N) J204P0084, installed. This proposed AD would require replacing those snap rings with a more robust design snap ring. This proposed AD results from two events of external engine fuel leakage and a subsequent under-cowl engine fire. We are proposing this AD to prevent an under-cowl engine fire and damage to the airplane during a high engine vibration event.
FAA (Aircraft Certification Service) Information Sharing and Listening Session.
Document Number: 07-711
Type: Notice
Date: 2007-02-15
Agency: Federal Aviation Administration, Department of Transportation
This notice announces a meeting to discuss various FAA rotorcraft safety initiatives and to gether any relevant information that will help to reduce general aviation rotorcraft accidents.
Extended Operations (ETOPS) of Multi-Engine Airplanes
Document Number: 07-704
Type: Rule
Date: 2007-02-15
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration is correcting a final rule published in the Federal Register on January 16, 2007 (72 FR 1808). That final rule applied to air carrier (part 121), commuter, and on- demand (part 135) turbine powered multi-engine airplanes used in passenger-carrying, and some all-cargo, extended-range operations. This amendment corrects the rule language applicable to dual maintenance and formatting of a Part 1 definition and section of Appendix G. None of these changes is substantive, but will clarify the FAA's intent of the final rule for the public.
Environmental Impact Statement: Kodiak Airport, Kodiak, AK
Document Number: 07-692
Type: Notice
Date: 2007-02-15
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration announces that it will prepare an Environmental Impact Statement (EIS) for the consideration of proposed actions at the Kodiak Airport. Public and agency scoping meetings will be conducted for the Federal Aviation Administration to receive comments regarding the preparation of the EIS.
Petitions for Exemption; Summary of Petitions Received
Document Number: E7-2547
Type: Notice
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption under part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Production and Airworthiness Approvals, Parts Marking, and Miscellaneous Proposals
Document Number: E7-2537
Type: Proposed Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the availability of and requests comments on the Initial Regulatory Flexibility Analysis (IRFA) associated with the notice of proposed rulemaking entitled, Production and Airworthiness Approvals, Parts Marking, and Miscellaneous Proposals.
Airworthiness Directives; McDonnell Douglas Model 717-200 Airplanes
Document Number: E7-2525
Type: Proposed Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain McDonnell Douglas Model 717-200 airplanes. This proposed AD would require installing a certain junction(s) and changing the wiring of the first officer's pitot static heater system. This proposed AD results from a report of temporary loss of the auto-flight function with displays of suspect or erratic airspeed indications. We are proposing this AD to prevent display of suspect or erratic airspeed indications during heavy rain conditions, which could reduce the ability of the flightcrew to maintain the safe flight and landing of the airplane.
Airworthiness Directives; McDonnell Douglas Model MD-10-10F and MD-10-30F Airplanes, Model MD-11 and MD-11F Airplanes, and Model 717-200 Airplanes
Document Number: E7-2524
Type: Proposed Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to all McDonnell Douglas Model MD-10-10F and MD-10-30F airplanes, Model MD-11 and MD-11F airplanes, and Model 717-200 airplanes. The existing AD currently requires a revision to the Limitations section of the airplane flight manual (AFM) to prohibit use of the flight management system (FMS) profile (PROF) mode for descent and/or approach operations unless certain conditions are met. This proposed AD would require, for Model 717-200 airplanes, upgrading the versatile integrated avionics (VIA) digital computer with new system software, which would end the need for the AFM revision. This proposed AD results from a report of two violations of the selected flight control panel (FCP) altitude during FMS PROF descents. We are proposing this AD to prevent, under certain conditions during the FMS PROF descent, the uncommanded descent of an airplane below the selected level-off altitude, which could result in an unacceptable reduction in the separation between the airplane and nearby air traffic or terrain.
Airworthiness Directives; Boeing Model 767 Airplanes
Document Number: E7-2523
Type: Proposed Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 767 airplanes. This proposed AD would require modifying the link arms of the number 2 windows in the flight compartment. This proposed AD results from reports of the number 2 windows opening during takeoff roll, which has resulted in aborted takeoffs. We are proposing this AD to prevent the opening of the number 2 windows during takeoff roll, which could result in an aborted takeoff or an unscheduled landing, and adversely affect the flightcrew's ability to perform critical takeoff communication.
Airworthiness Directives; Airbus Model A300 Airplanes; and Model A300 B4-600, B4-600R, and F4-600R Series Airplanes, and Model A300 C4-605R Variant F Airplanes (Collectively Called A300-600 Series Airplanes)
Document Number: E7-2513
Type: Proposed Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Airbus Model A300 airplanes and Model A300-600 series airplanes. This proposed AD would require inspecting to determine the part number of the sliding rods of the main landing gear (MLG) retraction actuators. For MLG retraction actuators equipped with sliding rods having certain part numbers, this proposed AD would also require inspecting for discrepancies, including but not limited to cracking, of the sliding rod; and performing corrective actions if necessary. This proposed AD results from a report of a failure of a sliding rod of the MLG retraction actuator before the actuator reached the life limit established by the manufacturer. We are proposing this AD to prevent failure of the sliding rod of the MLG retraction actuator, which could result in reduced structural integrity of the MLG.
Airworthiness Directives; LATINOAMERICANA DE AVIACIÓN (LAVIA) S.A. (Type Certificate Data Sheets No. 2A8 and No. 2A10 Previously Held by The New Piper Aircraft, Inc.) Models PA-25, PA-25-235, and PA-25-260 Airplanes
Document Number: E7-2508
Type: Proposed Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI references Latinoamericana de Aviaci[oacute]n S.A. Service Bulletin No. 25/53/03, dated May 10, 2006, which describes the unsafe condition as:
Airworthiness Directives; Turbomeca S.A. Arrius 2F Turboshaft Engines
Document Number: E7-2425
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is revising an existing airworthiness directive (AD) for Turbomeca S.A. Arrius 2F turboshaft engines. That AD currently requires replacing certain O-rings on the check valve piston in the lubrication unit, at repetitive intervals. This AD requires the same actions except it reduces the applicability from all Turbomeca S.A. Arrius 2F turboshaft engines, to Turbomeca S.A. Arrius 2F turboshaft engines that have not incorporated modification Tf75. This AD results from Turbomeca S.A. introducing a check valve piston design requiring no O-ring. We are issuing this AD to prevent an uncommanded in-flight shutdown of the engine, which could result in a forced autorotation landing and damage to the helicopter.
Airworthiness Directives; McDonnell Douglas Model DC-8-62, DC-8-63, DC-8-62F, and DC-8-63F Airplanes
Document Number: E7-2416
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain McDonnell Douglas Model DC-8-62, DC-8-63, DC-8-62F, and DC-8- 63F airplanes. This AD requires revising the wiring for the engine thrust brake circuit and indicating circuit and other specified actions, or rerouting the wiring at plug P1-1762A on the electrical power center generator control panel, as necessary. This AD results from the determination that the thrust reverser systems on these airplanes do not adequately preclude inadvertent deployment of the thrust reversers. We are issuing this AD to prevent inadvertent deployment of the thrust reversers during takeoff or landing, which could result in loss of control of the airplane.
Airworthiness Directives; BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ Airplanes
Document Number: E7-2414
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ airplanes. This AD requires repetitive inspections of the wing top skin under the rib 0 joint strap, and related investigative and corrective actions if necessary. This AD results from a report of a significant crack in the wing top skin under the rib 0 joint strap. We are issuing this AD to detect and correct corrosion and cracking in that area, which could result in reduced structural integrity of the wing.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
Document Number: E7-2413
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding an existing airworthiness directive (AD), which applies to all EMBRAER Model EMB-135 airplanes and Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP airplanes. That AD currently requires repetitive inspections of the pitot static heating relay K0057 and corrective actions if necessary. That AD also requires doing a terminating modification, which ends the repetitive inspections. This new AD removes the existing repetitive inspections and instead requires a one-time detailed inspection for damage of the relay, relay socket, and silicone gasket; applicable corrective actions; and a new action to modify and re-identify the relay socket. This AD also revises the existing terminating modificationreplacing/ rerouting the windowsill drain hosesinto two parts, each with a different, reduced compliance time. This AD results from a report of smoke in the cockpit. We are issuing this AD to prevent ignition of a windowsill drain hose by an overheated relay, which could cause fire and smoke in the cockpit.
Airworthiness Directives; Airbus Model A300 Airplanes
Document Number: E7-2412
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Airbus Model A300 B2 and B4 series airplanes. That AD currently requires modifying the wiring of the autopilot pitch torque limiter switch. This new AD adds repetitive operational tests of the autopilot disconnection upon pitch override, and related investigative/corrective actions if necessary. This AD results from the determination that such operational tests are necessary following the modification. We are issuing this AD to prevent possible trim loss when the flightcrew tries to override the autopilot pitch control, which could result in uncontrolled flight of the airplane.
Airworthiness Directives; Bombardier Model DHC-8-400 Series Airplanes
Document Number: E7-2411
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for certain Bombardier Model DHC-8-400 series airplanes. This AD requires inspecting to determine the manufacturer's date of certain V-band clamps on the engine exhaust shroud assembly, and doing related investigative/corrective actions if necessary. This AD results from a report of a discrepancy found during a maintenance inspection on a V- band clamp located on the engine exhaust duct shroud. The clamp ends were touching (although the correct fastener torque had been applied), resulting in reduced clamp force on the flanges. We are issuing this AD to prevent vibration in the duct shroud and fretting of the V-band clamp and flanges, which could result in cracking of the flanges and consequent release of hot exhaust gases from the engine tailpipe and damage to adjacent structure. This situation could trigger the fire warning system and result in an in-flight emergency, such as the flightcrew shutting down the engine and activating the fire suppression system.
Airworthiness Directives; CTRM Aviation Sdn. Bhd. (Formerly Eagle Aircraft (Malaysia) Sdn. Bhd.) Model Eagle 150B Airplanes
Document Number: E7-2319
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) to supersede AD 2004-11-04, which applies to all CTRM Aviation Sdn. Bhd. (Formerly Eagle Aircraft (Malaysia) Sdn. Bhd.) Model Eagle 150B airplanes. AD 2004-11-04 currently requires you to inspect certain canard inboard flap hinge support brackets (initially before further flight and repetitively before the first flight of each day) and perform any necessary follow-up action. This AD results from mandatory continuing airworthiness information (MCAI) issued by the airworthiness authority for Malaysia to require the installation of improved design inboard flap hinge brackets as terminating action for the repetitive inspections. Consequently, this AD retains the requirement that you inspect certain canard inboard flap hinge support brackets (initially before further flight and repetitively before the first flight of each day) and then requires that you replace the parts with new design inboard flap hinge brackets as terminating action for the repetitive inspections or if cracks are found. We are issuing this AD to detect and correct cracks in the canard inboard flap hinge support brackets, which could result in loss of retention of controls and consequently, loss of airplane control.
Airworthiness Directives; Pacific Aerospace Corporation Ltd Model 750XL Airplanes
Document Number: E7-2318
Type: Rule
Date: 2007-02-14
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as possible installation of undersize rivets in the fuselage roof at STN 180.85, BL 19.67, WL 86.2. We are issuing this AD to require actions to correct the unsafe condition on these products.
Unmanned Aircraft Operations in the National Airspace System
Document Number: E7-2402
Type: Rule
Date: 2007-02-13
Agency: Federal Aviation Administration, Department of Transportation
This document clarifies the FAA's current policy concerning operations of unmanned aircraft in the National Airspace System.
RTCA Special Committee 135: Environmental Conditions and Test Procedures for Airborne Equipment Joint With EUROCAE Working Group 14
Document Number: 07-628
Type: Notice
Date: 2007-02-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 135: Environmental Conditions and Test Procedures for Airborne Equipment joint with EUROCAE Working Group 14.
Eleventh Meeting: RTCA Special Committee 207/Airport Security Access Control Systems
Document Number: 07-627
Type: Notice
Date: 2007-02-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 207, Airport Security Access Control Systems.
Notice of Intent To Rule on Request To Release Airport Property at the Tillamook Airport, Tillamook, OR
Document Number: 07-626
Type: Notice
Date: 2007-02-13
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invite public comment on the release of land at Tillamook Airport under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).
Notice of Final Opinion on the Transferability of Interim Operating Authority Under the National Parks Air Tour Management Act
Document Number: 07-625
Type: Notice
Date: 2007-02-13
Agency: Federal Aviation Administration, Department of Transportation
This notice sets forth the FAA's final opinion on the transferability of interim operating authority under the National Parks Air Tour Management Act.
National Air Tour Safety Standards
Document Number: 07-580
Type: Rule
Date: 2007-02-13
Agency: Federal Aviation Administration, Department of Transportation
This final rule sets safety and oversight rules for a broad variety of sightseeing and commercial air tour flights. The rule responds to National Transportation Safety Board (NTSB) recommendations, Government Accountability Office (GAO) reports, and Department of Transportation Inspector General Reports that recommend better oversight of the sightseeing and commercial air tour industry. The intended effect of this final rule is to standardize requirements for air tour operators and consolidate air tour safety standards within part 136.
Airworthiness Directives; British Aerospace Regional Aircraft Models HP.137 Jetstream Mk.1, Jetstream Series 200, Jetstream Series 3101, Jetstream Model 3201 Airplanes
Document Number: E7-2312
Type: Proposed Rule
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Federal Presumed to Conform Actions Under General Conformity
Document Number: E7-2241
Type: Notice
Date: 2007-02-12
Agency: Department of Transportation, Federal Aviation Administration
The Clean Air Act (CAA) section 176(c), 42 U.S.C. 7506(c) and Amendments of 1990 \1\ require that all Federal actions conform to an applicable State Implementation Plan (SIP). The U.S. Environmental Protection Agency (EPA) has established criteria and procedures for Federal agencies to use in demonstrating conformity with an applicable SIP that can be found at 40 CFR 93.150 et.seq. (``The Rule'').
Air Traffic Procedures Advisory Committee
Document Number: E7-2233
Type: Notice
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public that a meeting of the Federal Aviation Air Traffic Procedures Advisory Committee (ATPAC) will be held to review present air traffic control procedures and practices for standardization, clarification, and upgrading of terminology and procedures.
Establishment, Modification and Revocation of VOR Federal Airways; East Central United States
Document Number: E7-2229
Type: Rule
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
This action corrects a final rule published in the Federal Register on January 18, 2007 (72 FR 2182), Airspace Docket No. 06-ASW- 1, FAA Docket No. FAA-2006-24926. In that rule, an inadvertent error was made in the legal description for VOR Federal Airway V-75. Specifically, the description did not exclude the portion of the airway that is in Canadian airspace. This action corrects that error.
Airworthiness Directives; Turbomeca S.A. Makila 1A and 1A1 Turboshaft Engines
Document Number: E7-2069
Type: Rule
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; CFM International CFM56-5 and -5B Series Turbofan Engines
Document Number: E7-2068
Type: Rule
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding an existing airworthiness directive (AD) for CFM International CFM56-5 and -5B series turbofan engines. That AD requires exhaust gas temperature (EGT) harness replacement or the establishment of an EGT baseline and trend monitoring. That AD also requires replacement, if necessary, of certain EGT harnesses and EGT couplings as soon as a slow and continuous EGT drift downward is noticed after the effective date of that AD. This AD requires the same actions but for an increased population of affected EGT harnesses. This AD results from CFM International adding subsequently certified engine models to the list of engines that could have affected harnesses installed. We are issuing this AD to prevent unexpected deterioration of critical rotating engine parts due to higher than desired engine operating EGTs.
Airworthiness Directives; Rolls-Royce Deutschland Ltd & Co KG (formerly Rolls-Royce plc) Dart 528, 529, 532, 535, 542, and 552 Series Turboprop Engines
Document Number: E7-1708
Type: Rule
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Deutschland Ltd & Co KG (formerly Rolls-Royce plc) (RRD) Dart 528, 529, 532, 535, 542, and 552 series turboprop engines. This AD would require repetitive inspections of high pressure turbine (HPT) blade platforms and shrouds, and reworking the engines if the inspections reveal excessive gaps between blade shrouds. This AD results from reports of HPT disk rim failures. We are issuing this AD to prevent HPT disk rim failures resulting in the release of portions of the HPT disk, uncontained engine failure, and damage to the airplane.
Proposed Modification of the Phoenix Class B Airspace Area; Arizona
Document Number: 07-599
Type: Proposed Rule
Date: 2007-02-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify the Phoenix (PHX), AZ, Class B airspace area. Specifically, this action proposes to lower the ceiling to 9,000 feet mean sea level (MSL) and expand the arrival extension boundaries to 30 Nautical Miles (NM) to ensure the containment of the PHX Standard Terminal Arrival Routes (STAR) at the Phoenix Sky Harbor International Airport, and correct the inefficiencies of several existing areas identified during public meetings, and reviews of the airspace by the Phoenix Airspace Users Work Group (PAUWG) and Phoenix Terminal Radar Approach Control (TRACON P50). The FAA is proposing this action to improve the flow of air traffic, enhance safety, and reduce the potential for midair collision in the PHX Class B airspace area, while accommodating the concerns of airspace users. Further, this effort supports the FAA's national airspace redesign goal of optimizing terminal and en route airspace areas to reduce aircraft delays and improve system capacity.
Special Conditions: Quest Aircraft Company; Kodiak Model 100; Protection of Electronic Flight Instrument System From the Effects of High Intensity Radiated Fields (HIRF)
Document Number: E7-2098
Type: Rule
Date: 2007-02-08
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued to Quest Aircraft Company, LLC; 1200 Turbine Drive; Sandpoint, ID 83864 for a type certificate for the Kodiak Model 100 airplane. These airplanes will have novel and unusual design features when compared to the state of technology envisaged in the applicable airworthiness standards. These novel and unusual design features include the installation of electrical and electronic systems that perform critical functions for which the applicable regulations do not contain adequate or appropriate airworthiness standards for the protection of these systems from the effects of high intensity radiated fields (HIRF). These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to the airworthiness standards applicable to these airplanes.
Special Conditions; Aviation Technology Group (ATG); Javelin Model 100; Protection of Systems for High Intensity Radiated Fields (HIRF)
Document Number: E7-2097
Type: Rule
Date: 2007-02-08
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued to Aviation Technology Group (ATG), 8001 S. InterPort Blvd., Englewood, CO 80112 for a type certificate for the Javelin Model 100 airplane. These airplanes will have novel and unusual design features when compared to the state of technology envisaged in the applicable airworthiness standards. These novel and unusual design features include the installation of electrical and electronic systems that perform critical functions for which the applicable regulations do not contain adequate or appropriate airworthiness standards for the protection of these systems from the effects of high intensity radiated fields (HIRF). These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to the airworthiness standards applicable to these airplanes.
Petitions for Exemption; Summary of Petitions Received
Document Number: E7-2048
Type: Notice
Date: 2007-02-08
Agency: Federal Aviation Administration, Department of Transportation
Pursuant to FAA's rulemaking provisions governing the application, processing, and disposition of petitions for exemption under part 11 of Title 14, Code of Federal Regulations (14 CFR), this notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Airworthiness Directives; Airbus Model A300 and A300-600 Airplanes
Document Number: E7-1883
Type: Rule
Date: 2007-02-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracking in the wing main landing gear (MLG) rib 5 aft bearing forward lug, which could affect the structural integrity of the MLG attachment. This AD requires actions that are intended to address the unsafe condition described in the MCAI.
Airworthiness Directives; EADS SOCATA Model TBM 700 Airplanes
Document Number: E7-1878
Type: Rule
Date: 2007-02-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as an excessive lateral play caused by a nonconforming washer that might lead to the deterioration of the elevator trim tab bearing fatigue resistance. We are issuing this AD to require actions to correct the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.