National Highway Traffic Safety Administration December 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 12 of 12
Federal Motor Vehicle Safety Standards; Bus Emergency Exits and Window Retention and Release
This NPRM proposes two housekeeping measures relating to Federal Motor Vehicle Safety Standard (FMVSS) No. 217, ``Bus emergency exits and window retention and release.'' First, in response to a petition for rulemaking from the School Bus Manufacturers' Technical Council, NHTSA proposes to amend the standard to specify that the exterior release (the exterior handle) for school bus rear emergency exit doors may be located opposite the door hinges. The standard currently specifies that the exterior release for rear emergency exit doors be located in the middle of the door. Second, this NPRM would clarify FMVSS No. 217 as to the number of force applications that are required to open a window or roof emergency exit. For exits with one release mechanism, the exit shall require two force applications to open. The standard currently specifies that the ``mechanism'' shall require two force applications to open. For exits with two release mechanisms, there shall be a total of three force applications to open the exit: one force application shall be applied to each of the two mechanisms to release the mechanism, and another force shall be applied to open the exit.
Federal Motor Vehicle Safety Standards; Designated Seating Positions
This document responds, in part, to petitions for reconsideration of an October 2008 final rule that amended the definition of the term, ``designated seating position,'' as used in the Federal motor vehicle safety standards, to clarify which areas within the interior of a vehicle meet that definition.
Vehicle Identification Number Requirements; Technical Amendment
NHTSA published in the Federal Register of April 30, 2008, a final rule making certain changes in the 17-character vehicle identification number (VIN) system so that the system will remain viable for at least another 30 years. The effective date of that final rule was October 27, 2008. The agency published a correction document on May 16, 2008. Today's document makes further correction of several typographic errors in the regulatory text adopted by the April 2008 final rule.
Make Inoperative Exemptions; Head Restraints
This notice of proposed rulemaking is being issued in response to a petition from Bruno Independent Living Aids to expand and update existing exemptions to the ``make inoperative'' prohibition with respect to the Federal motor vehicle safety standard on head restraints. These exemptions are included in a regulation that provides exemptions for the ``make inoperative'' provision for, among other things, vehicle modifications to accommodate people with disabilities. NHTSA is proposing two substantive changes to the regulation. The first is to expand the exemption from the minimum height requirements listed in the head restraint standard to include the right front passenger position in addition to the driver position. The second is to update the exemption to include relevant provisions of a new version of the head restraint standard. Additionally, this document proposes to update an existing reference in the exemption to reflect the current numbering in the Code of Federal Regulations. Finally, we are denying other requests to expand the exemption to certain other requirements of the head restraint standard.
Vehicle Identification Number Requirements
This document denies two petitions for reconsideration of an April 30, 2008, final rule that made certain modifications to 49 CFR part 565, Vehicle Identification Number Requirements, to enable the 17 character vehicle identification number (VIN) system that has been in place for nearly 30 years to continue to function for at least another 30 years. One of the petitions for reconsideration involved the effective date, which NHTSA believes was resolved by the publication of a correction notice on May 16, 2008. The second petition asked for changes to the VIN system so that, among other things, a person looking at the VIN of a motorcycle will be able to tell whether the vehicle was manufactured in the 30 year period beginning with the 1980 model year or in the 30 year period beginning with the 2010 model year. The agency is denying the petition because the issues it raises were outside of the scope of the rulemaking.
Highway Safety Programs; Conforming Products List of Screening Devices To Measure Alcohol in Bodily Fluids
This Notice amends and updates the list of devices that conform to the Model Specifications for Screening Devices to Measure Alcohol in Bodily Fluids.
Petition for Exemption From the Vehicle Theft Prevention Standard; Volkswagen
This document grants in full the petition of Volkswagen Group of America (VW) in accordance with Sec. 543.9(c)(2) of 49 CFR Part 543, Exemption from the Theft Prevention Standard, for the Volkswagen Tiguan vehicle line beginning with model year (MY) 2011. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard.
Reports, Forms, and Record Keeping Requirements
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collection and the expected burden.
Federal Motor Vehicle Safety Standards, Ejection Mitigation; Phase-In Reporting Requirements
This notice of proposed rulemaking would establish a new Federal Motor Vehicle Safety Standard (FMVSS) No. 226, to reduce the partial and complete ejection of vehicle occupants through side windows in crashes, particularly rollover crashes. The standard would apply to the side windows next to the first three rows of seats in motor vehicles with a gross vehicle weight rating (GVWR) of 4,536 kilogram (kg) or less (10,000 pounds (lb) or less). To assess compliance, the agency is proposing a test in which an impactor would be propelled from inside a test vehicle toward the windows. The ejection mitigation safety system would be required to prevent the impactor from moving more than a specified distance beyond the plane of a window. To ensure that the systems cover the entire opening of each window for the duration of a rollover, each side window would be impacted at up to four locations around its perimeter at two time intervals following deployment.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
