Federal Aviation Administration August 25, 2020 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Petition for Exemption; Summary of Petition Received; Airbus Helicopters S.A.S.
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Proposed Amendment of Class D and Class E Airspace and Establishment of Class E Airspace; Fort Riley and Manhattan, KS
This action proposes to amend the Class D and Class E airspace at Marshall AAF, Fort Riley, KS, and Manhattan Regional Airport, Manhattan, KS, and establish Class E airspace extending upward from 700 feet above the surface at Marshall AAF and Freeman Field, Junction City, KS. The FAA is proposing this action as the result of airspace reviews caused by the decommissioning of the Calvary and McDowell Creek non-directional beacons (NDBs). The names and geographic coordinates of airports and navigational aids would also be updated to coincide with the FAA's aeronautical database.
Notice of Availability of Categorical Exclusion and Record of Decision (CATEX/ROD) for DCA Airspace Procedures
The FAA, Eastern Service Center is issuing this notice to advise the public of the availability of the Categorical Exclusion/ Record of Decision (CATEX/ROD) approving certain airspace procedure changes at Ronald Reagan Washington National Airport (DCA). The FAA reviewed the action and determined it to be categorically excluded from further environmental review. The FAA's Record of Decision also documents the FAA's compliance with Section 106 of the National Historic Preservation Act and other special purpose laws.
Airworthiness Directives; Mitsubishi Heavy Industries, Ltd. Airplanes
The FAA proposes to supersede Airworthiness Directive (AD) 75- 16-20, which applies to all Mitsubishi Model MU-2B, MU-2B-10, MU-2B-15, MU-2B-20, MU-2B-25, MU-2B-26, MU-2B-30, MU-2B-35, and MU-2B-36 airplanes. AD 75-16-20 requires repetitive inspections of the propeller pitch control (PPC) lever for security and proper rigging. Since the FAA issued AD 75-16-20, the FAA received additional reports of the PPC lever linkage disconnecting at the engine. In addition, Mitsubishi has type certificated additional airplanes that are subject to the unsafe condition. This proposed AD would require modification and repetitive inspections of the PPC lever linkage. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for certain Airbus SAS Model A350-941 airplanes. This proposed AD was prompted by reports that certain central wing box (CWB) fasteners had rotated inside the fastener holes due to insufficient friction for the application. This proposed AD would require replacement of the affected fasteners, as specified in a European Union Aviation Safety Agency (EASA) AD, which will be incorporated by reference. The FAA is proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is superseding Airworthiness Directive (AD) 2019-03- 06, which applied to certain The Boeing Company Model 737-300, -400, and -500 series airplanes. AD 2019-03-06 required installing lanyard assemblies on the passenger service units (PSUs) and, for certain airplanes, on the life vest panels. This AD was prompted by a report indicating that the PSUs became separated from their attachments during several survivable accident sequences, and by the determination that additional actions are necessary for five airplanes. This AD retains the requirements of AD 2019-03-06 and also requires installation of lanyard assemblies on the life vest panels on those five airplanes. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for all Airbus SAS Model A310 series airplanes. This AD was prompted by reports of cracking found at certain fuselage frames. This AD requires repetitive inspections for discrepancies of certain locations in and around the fuselage and applicable corrective actions, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Amendment of Class E Airspace; Kotzebue, AK; Correction
The Federal Aviation Administration (FAA) is correcting a final rule that appeared in the Federal Register on July 23, 2020. The rule modified Class E airspace designated as a surface area. The rule also modified Class E airspace extending upward from 700 feet above the surface and Class E airspace extending upward from 1,200 feet above the surface at Ralph Wien Memorial Airport. The final rule inadvertently included spelling errors within the airport's name in several sections of the Final Rule. This action corrects the spelling errors throughout the final rule document.
Airworthiness Directives; GA8 Airvan (Pty) Ltd Airplanes
The FAA is adopting a new airworthiness directive (AD) for GA8 Airvan (Pty) Ltd Models GA8 and GA8-TC320 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a design change to the fuselage strut pick up ribs No. 5 and 6 that requires a reduced life limit. The FAA is issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain The Boeing Company Model 747-8 and -8F series airplanes, and Model 787-8, -9, and -10 airplanes. This AD requires removing Kathon FP 1.5 biocide from the fuel tanks and engines, installing a fuel limitation placard, and revising the existing airplane flight manual (AFM) to prohibit operation of the airplane with Kathon FP 1.5 biocide in a fuel tank or engine. This AD was prompted by a report indicating that Kathon FP 1.5 biocide added to fuel and running through the engines can lead to significant engine anomalies. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus SAS Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A319-115 and -153N; A320-214, -216, -232, - 251N, -252N, -271N, and -273N; and A321-211, -231, -251N, -253N, -271N, -272N, -251NX, -252NX, -253NX, and -271NX airplanes. This AD was prompted by reports of fuel leaks at the interface of the low pressure shut off valves on the pylon areas of engines 1 and 2 due to improperly installed parts during production. This AD requires a one-time detailed inspection of each low pressure shut off valve on the pylon areas of engines 1 and 2 for correct installation, and replacing the O-rings and torqueing the mounting bolts within specified values as applicable, as specified in a European Union Aviation Safety Agency (EASA) AD 2020- 0148, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Dassault Aviation Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Dassault Aviation Model MYSTERE-FALCON 900, FALCON 900EX, FALCON 2000, and FALCON 2000EX airplanes. This AD was prompted by reports of loose or missing nuts on the pilot and co-pilot ventral seat belt attachment points. This AD requires a detailed inspection of certain seat belt attaching point nuts for any loose or missing nuts and replacement, as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
The FAA proposes to adopt a new airworthiness directive (AD) for all The Boeing Company Model DC-10-10 and DC-10-10F airplanes, Model DC-10-15 airplanes, Model DC-10-30 and DC-10-30F (KC-10A and KDC- 10) airplanes, Model DC-10-40 and DC-10-40F airplanes, Model MD-10-10F and MD-10-30F airplanes, and Model MD-11 and MD-11F airplanes. This proposed AD was prompted by reports of cracked floor beams and floor beam supports in the area of the overwing exit doors located at certain stations (STA). This proposed AD would require an inspection of the overwing floor beams for any repair, repetitive inspections of the overwing floor beams and floor beam supports at certain STA on the left and right sides for any crack, and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
