Federal Aviation Administration April 2, 2019 – Federal Register Recent Federal Regulation Documents
Results 1 - 6 of 6
Airworthiness Criteria: Glider Design Criteria for Alexander Schleicher GmbH & Co. Segelflugzeugbau Model ASK 21 B Glider
This notice announces the availability of and requests comments on the proposed design criteria for the Alexander Schleicher GmbH & Co. Segelflugzeugbau Model ASK 21 B glider. The administrator finds the proposed design criteria for the Model ASK 21 B acceptable.These final design criteria will be published in the Federal Register.
IFR Altitudes; Miscellaneous Amendments
This amendment adopts miscellaneous amendments to the required IFR (instrument flight rules) altitudes and changeover points for certain Federal airways, jet routes, or direct routes for which a minimum or maximum en route authorized IFR altitude is prescribed. This regulatory action is needed because of changes occurring in the National Airspace System. These changes are designed to provide for the safe and efficient use of the navigable airspace under instrument conditions in the affected areas.
Airworthiness Directives; Diamond Aircraft Industries GmbH Airplanes
We propose to adopt a new airworthiness directive (AD) for certain Diamond Aircraft Industries GmbH Model DA 42 NG and Model DA 42 M-NG airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The unsafe condition in the MCAI is insufficient clearance of the gust lock mounts on the pilot side rudder pedals. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace Corporation Airplanes
We are revising an earlier proposal for certain Gulfstream Aerospace Corporation (Gulfstream) Model G-IV and Model GIV-X airplanes. This action revises the notice of proposed rulemaking (NPRM) by proposing to require a later revision of the service information to update the life limits and inspection requirements in the airworthiness limitations section (ALS) of the aircraft maintenance manual (AMM). We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these actions would impose an additional burden over those in the NPRM, we are reopening the comment period to allow the public the chance to comment on these changes.
Airworthiness Directives; Airbus Helicopters Deutschland GmbH Helicopters
We are adopting a new airworthiness directive (AD) for Airbus Helicopters Deutschland GmbH (Airbus Helicopters) Model MBB-BK 117 A-1, MBB-BK 117A-3, MBB-BK 117 A-4, MBB-BK 117 B-1, MBB-BK 117 B-2, MBB-BK 117 C-1, and MBB-BK 117 C-2 helicopters. This AD requires repetitive inspections of the tail rotor (T/R) gearbox housing. This AD was prompted by a report that a crack was found in a T/R gearbox housing. The actions of this AD are intended to correct an unsafe condition on these products.
Airworthiness Directives; Bell Helicopter Textron Canada Limited Helicopters
We are adopting a new airworthiness directive (AD) for Bell Helicopter Textron Canada Limited (BHTC) Model 429 helicopters. This AD requires inspecting each main rotor pitch link rod end bearing assembly (bearing) for wear and play. This AD was prompted by reports of worn bearings. The actions of this AD are intended to prevent an unsafe condition on these products.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.