Federal Aviation Administration October 2016 – Federal Register Recent Federal Regulation Documents

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

The National Parks Air Tour Management Act (NPATMA) requires the Federal Aviation Administration (FAA) and National Park Service (NPS) to develop an air tour management plan for units of the national park system where an operator has applied for authority to conduct commercial air tours. The FAA Modernization and Reform Act of 2012 amended various provisions of NPATMA. One provision exempted national park units with 50 or fewer annual flights from the requirement to prepare an air tour management plan or voluntary agreement and requires FAA and NPS to jointly publish a list of exempt parks. By Federal Register notice (See 77 FR 75254, December 19, 2012), FAA and NPS published an initial list of exempt parks in 2012 and another list in 2014 (See 79 FR 14569-14570, March 14, 2014). This notice provides the annual updated list of parks that are exempt for calendar years 2014 and 2015.

The FAA is considering a proposal to change 63.04 acres of airport land from aeronautical use to non-aeronautical use and to authorize the lease of airport property located at Cherry Capital Airport, Traverse City, Michigan. The aforementioned land is not needed for aeronautical use. The proposed property is located east of the airport terminal area along South Airport Road at the Cherry Capital Airport. The property is currently a wooded area maintained for compatible land use surrounding the airfield. The proposed non-aeronautical land use would be for compatible commercial/industrial development, allowing the airport to become more self-sustaining.

This action extends the prohibition against certain flight operations in the Simferopol (UKFV) and Dnipropetrovsk (UKDV) flight information regions (FIRs) by all United States (U.S.) air carriers; U.S. commercial operators; persons exercising the privileges of a U.S. airman certificate, except when such persons are operating a U.S.- registered aircraft for a foreign air carrier; and operators of U.S.- registered civil aircraft, except when such operators are foreign air carriers. The FAA finds this action to be necessary to address a continuing hazard to persons and aircraft engaged in such flight operations.

We are adopting a new airworthiness directive (AD) for Schempp-Hirth Flugzeugbau GmbH Models Discus-2a, Discus-2b, Discus-2c, Discus 2cT, Ventus-2a, and Ventus-2b gliders. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition insufficient overlap of the airbrake panels. We are issuing this AD to correct the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Diamond Aircraft Industries GmbH Models DA 40 NG, DA 42 NG, and DA 42 M-NG airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as cracked autopilot bridle cable clamps. We are issuing this AD to correct the unsafe condition on these products

This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This action proposes special conditions for the Boeing Model 777-200 airplane. This airplane, as modified by Aerocon Engineering Company (Aerocon), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for transport-category airplanes. This design feature is an access hatch, installed between the cabin and the Class C cargo compartment, to allow in-flight access to the Class C cargo compartment. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes special conditions for the Bombardier Inc. (Bombardier) Model BD-700-2A12 and BD-700-2A13 airplanes. These airplanes will have novel or unusual design features when compared to the state of technology envisioned in the airworthiness standards for transport category airplanes. These features are associated with an aluminum-lithium fuselage construction that may provide different levels of protection from post-crash fire threats than similar aircraft constructed from traditional aluminum structure. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These proposed special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

These special conditions are issued for the modification of the Airbus Helicopters Model EC120B helicopter. This model helicopter will have a novel or unusual design feature after installation of the S-TEC Corporation (S-TEC) HeliSAS helicopter autopilot/stabilization augmentation system (AP/SAS) that has potential failure conditions with more severe adverse consequences than those envisioned by the existing applicable airworthiness regulations. These special conditions contain the added safety standards the Administrator considers necessary to ensure the failures and their effects are sufficiently analyzed and contained.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We are adopting a new airworthiness directive (AD) for all Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by a revision by the manufacturer to the Certification Maintenance Requirements (CMR) of the Airworthiness Limitation Items (ALI), in the Maintenance Requirement Manual (MRM), that introduces a new CMR task that requires repetitive operational checks of the propeller overspeed governor. This AD requires revising the airplane maintenance or inspection program, as applicable, to incorporate a new CMR task. We are issuing this AD to prevent dormant failure of the propeller overspeed governor, which may lead to a loss of propeller overspeed protection and result in high propeller drag in flight.

We propose to adopt a new airworthiness directive (AD) for certain Bombardier Inc. Model DHC-8-102, -103, and -106 airplanes; DHC- 8-200 series airplanes; and Model DHC-8-300 series airplanes. This proposed AD was prompted by reports of incorrect installation of the auto-ignition system due to crossed wires at one of the splices in the auto-relight system. This proposed AD would require inspecting the auto-ignition system for correct wiring, and doing corrective actions if necessary. We are proposing this AD to detect and correct incorrect wiring of the auto-ignition system, which could result in inability to restart the engine in flight and consequent reduced controllability of the airplane.

We propose to adopt a new airworthiness directive (AD) for all Airbus Model A300 series airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) that indicates a section of the wing and aft fuselage is subject to widespread fatigue damage (WFD). This proposed AD would require an inspection to determine if certain modifications have been done. For airplanes on which the specified modifications have not been done, this proposed AD would require accomplishing those modifications, including doing related investigative and corrective actions if necessary. We are proposing this AD to prevent reduced structural integrity of these airplanes due to the failure of certain structural components.

The FAA is issuing this notice to advise the public of a meeting of Ninth RTCA SC-229 406 MHz ELT Plenary Joint with EUROCAE WG-98 10th Plenary.

We are superseding airworthiness directive (AD) 2015-12-04 for all Honeywell International Inc. (Honeywell) TPE331-1, -2, -2UA, -3U, - 3UW, -5, -5A, -5AB, -5B, -6, -6A, -10, -10AV, -10GP, -10GT, -10P, -10R, -10T, -10U, -10UA, -10UF, -10UG, -10UGR, -10UR, -11U, -12JR, -12UA, - 12UAR, and -12UHR turboprop engines with certain Woodward fuel control unit (FCU) assemblies, installed. AD 2015-12-04 required initial and repetitive dimensional inspections of the affected fuel control drives and insertion of certain airplane operating procedures into the applicable flight manuals. This AD corrects the compliance requirements and relaxes the inspection interval. This AD was prompted by a request to change compliance time from 50 hours to 100 hours for affected fuel controls. We are issuing this AD to prevent failure of the fuel control drive, damage to the engine, and damage to the airplane.

We are revising an earlier proposed airworthiness directive (AD) for all Airbus Model A318, A319, A320, and A321 series airplanes. This action revises the notice of proposed rulemaking (NPRM) by requiring an additional action for sealant application on some nuts and bolts on the National Advisory Committee for Aeronautics (NACA) duct assembly and adding a grace period to the compliance time. We are proposing this SNPRM to detect and correct corroded circlips. Such corrosion could lead to failure of the circlips and consequent movement of the FVP and result in a reduction of the flame protector capability of the FVP cartridge. Such a condition could result in damage to the airplane in case of lightning impact or fire on the ground. Since the additional actions impose an additional burden over those proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.

We are adopting a new airworthiness directive (AD) for Airbus Helicopters Model MBB-BK 117 C-2 helicopters with certain duplex trim actuators installed. This AD requires repetitively inspecting the lateral and longitudinal trim actuator output levers for correct torque of the nuts. This AD was prompted by a design review that indicated the attachment screws can become loose under certain circumstances. These actions are intended to prevent the loss of an attachment screw, which could result in movement of the output lever in an axial direction, contact of a bolt connecting the control rod to an output lever with the actuator housing, and subsequent loss of helicopter control.

We propose to supersede Airworthiness Directive (AD) 2012-16- 08, for certain BAE Systems (Operations) Limited Model BAe 146 and Avro 146-RJ series airplanes. AD 2012-16-08 currently requires repetitive detailed inspections for bulging, surface anomalies, and cracking of the fuselage skin adjacent to the discharge valves, and repair and application of additional sealant in the affected area if necessary. Since we issued AD 2012-16-08, it was found that airplanes on which a certain modification was incorporated during production were excluded from the applicability, but are also affected by the condition that precipitated AD 2012-16-08. This proposed AD would retain the requirements of AD 2012-16-08, expand the applicability, and require an additional one-time inspection for the presence of water traps/air driers to determine which airplanes must be inspected. We are proposing this AD to detect and correct bulging, surface anomalies, and cracking that could propagate towards the forward discharge valve outlet and result in the failure of the fuselage skin, leading to a possible sudden loss of cabin pressure and injury to occupants.

We are superseding Airworthiness Directive (AD) 2012-20-07 for certain Airbus Model A318, A319, A320, and A321 series airplanes. AD 2012-20-07 required revising the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness (ICA) to incorporate new limitations for fuel tank systems, and revising the maintenance program to incorporate revised fuel maintenance and inspection tasks. This new AD requires revising the maintenance or inspection program to incorporate revised fuel airworthiness limitations. This AD was prompted by Airbus issuing more restrictive maintenance requirements and/or airworthiness limitations. We are issuing this AD to prevent the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.

This document provides Emergency Restriction/Prohibition Order No. FAA-2016-9288, issued October 14, 2016 and effective at 12 p.m. (noon) Eastern Daylight Time (EDT), October 15, 2016 to Samsung Galaxy Note 7 Users and air carriers. The Emergency Order prohibits persons from offering for air transportation or transporting via air any Samsung Galaxy Note 7 device on their person, in carry-on baggage, in checked baggage, or as cargo; requires individuals who inadvertently bring a Samsung Galaxy Note 7 device onto an aircraft immediately power off the device, not use or charge the device while aboard the aircraft, protect the device from accidental activation, including disabling any features that may turn on the device, such as alarm clocks, and keep the device on their person and not in the overhead compartment, seat back pocket, nor in any carry-on baggage, for the duration of the flight; requires air carriers to alert passengers to the prohibition against air transport of Samsung Galaxy Note 7 devices, in particular, immediately prior to boarding, and to deny boarding to a passenger in possession of a Samsung Galaxy Note 7 device unless and until the passenger divests themselves and their baggage of the Samsung Galaxy Note 7 device; and requires that if an air carrier flight crew member identifies that a passenger is in possession of a Samsung Galaxy Note 7 device while the aircraft is in flight, the crew member must instruct the passenger to power off the device and not to use or charge the device onboard the aircraft and protect the device from accidental activation, including disabling any features that may turn on the device, such as alarm clocks, and keep the device on their person and not in the overhead compartment, seat back pocket, nor in any carry-on baggage, for the duration of the flight.

The FAA proposes to rule and invites public comment on the release of land at Waterloo Regional Airport, Waterloo, Iowa, under the provisions of 49 U.S.C. 47107(h)(2).

The FAA is issuing this notice to advise the public of a meeting of Twelfth RTCA SC-228 Minimum Performance Standards (MPS) for UAS Focused-Topic Plenary.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.