Federal Aviation Administration October 7, 2014 – Federal Register Recent Federal Regulation Documents

Special Conditions: Hawker Beechcraft, Model 400A Airplane, as Modified by Nextant Aerospace; Installed Rechargeable Lithium Batteries and Battery Systems
Document Number: 2014-23887
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Hawker Beechcraft Model No. 400A airplane as modified by Nextant Aerospace. This modification will have a novel or unusual design feature associated with an installed emergency power supply and standby attitude module that use rechargeable lithium batteries and battery systems. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Airworthiness Directives; PILATUS Aircraft Ltd. Airplanes
Document Number: 2014-23880
Type: Proposed Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for PILATUS Aircraft Ltd. Model PC-7 airplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as possible cracking from stress corrosion on various parts of the aircraft structure made of aluminum alloy AA2024-T351. We are issuing this proposed AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Beechcraft Corporation Airplanes
Document Number: 2014-23879
Type: Proposed Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Beechcraft Corporation Model G58 airplanes. This proposed AD was prompted by reports of fuel leaks due to fuel cells that did not properly fit in Model G58 airplanes. This proposed AD would require inspecting for and replacing, as necessary, certain fuel cells. This proposed AD would also require inspecting and replacing parts, as necessary, of the left and right fuel system installations and correcting torques on fuel system fittings; and prohibit future installations of certain fuel cells. We are proposing this AD to correct the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-23826
Type: Notice
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-23825
Type: Notice
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-23824
Type: Notice
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2014-23823
Type: Notice
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Airbus Helicopters, Inc. (Previously Eurocopter France) Helicopters
Document Number: 2014-23594
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding airworthiness directive (AD) 2012-02-13 for certain Airbus Helicopters, Inc. (Airbus Helicopters) Model EC130B4 helicopters. AD 2012-02-13 required inspecting certain areas of the tailboom/Fenestron junction frame (junction frame) for a crack. This AD retains the requirements of AD 2012-02-13, expands the inspection area of the junction frame, and reduces the repetitive inspection interval. These actions are intended to detect a crack in the junction frame, which could result in detachment of the Fenestron and subsequent loss of control of the helicopter.
Airworthiness Directives; Brantly International, Inc. Helicopters
Document Number: 2014-23592
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Brantly International, Inc. (Brantly) Model B-2, Model B-2A, and Model B-2B helicopters with certain main rotor blades. This AD requires inspecting each main rotor (M/R) blade for a crack or delamination and removing the blade if a crack exists or if the delamination exceeds certain thresholds. This AD was prompted by multiple reports of M/R blade cracks and an incident in which a crack that originated near the M/R blade trailing edge resulted in the loss of a large section of the M/R blade. The actions of this AD are intended to prevent loss of the M/R blade and subsequent loss of control of the helicopter.
Airworthiness Directives; Pacific Aerospace Limited Airplanes
Document Number: 2014-23560
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2014-04-03 for all Pacific Aerospace Limited Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as broken control column attachment bolts failing in service. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Alexandria Aircraft LLC Airplanes
Document Number: 2014-23559
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 75-20-06 for certain Alexandria Aircraft LLC (type certificate previously held by Bellanca Aircraft Corp., Viking Aviation, Inc., and Bellanca, Inc.) Models 14-19-3A, 17-30, 17-30A, 17-31, 17-31A, 17-31ATC, and 17-31TC airplanes. AD 75-20-06 required repetitively inspecting the aft fuselage structure near the top of the vertical side tubing, which connects the horizontal stabilizer carry-through to the upper fuselage longeron, for cracks and installing the manufacturer's service repair kit as a terminating action for the repetitive inspections to repair any cracks found. Since we issued AD 75-20-06, we have determined that installing the service kit has not prevented cracks from occurring. We have also determined that all affected airplane serial numbers should be included in the Applicability section. This AD requires continued repetitive inspections of the aft fuselage structure near the top of the vertical side tubing for cracks and making all necessary replacements of cracked parts. This AD also adds additional serial number airplanes to the Applicability section. We are issuing this AD to correct the unsafe condition on these products.
Airworthiness Directives; Pacific Aerospace Limited Airplanes
Document Number: 2014-23557
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Pacific Aerospace Limited Model 750XL airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as failure of the fin forward pickup due to possible fatigue cracks. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; Empresa Brasileira de Aeronautica S. A. (EMBRAER) Airplanes
Document Number: 2014-23555
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Empresa Brasileira de Aeronautica S. A. (EMBRAER) Models EMB-110P1 and EMB- 110P2 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as corrosion and cracking on the rudder trim tab actuator terminal. We are issuing this AD to require actions to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2014-23545
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2013-11-14 for certain The Boeing Company Model 777-200 and -300 series airplanes. AD 2013-11-14 required repetitive general visual inspections of the strut forward dry bay for the presence of hydraulic fluid, and related investigative and corrective actions (including checking drain lines for blockage due to hydraulic fluid coking, and cleaning or replacing drain lines to allow drainage) if necessary. This AD adds airplanes to the applicability. This AD was prompted by reports of hydraulic fluid contamination (including contamination caused by hydraulic fluid in its liquid, vapor, and/or solid (coked) form) found in the strut forward dry bay. We are issuing this AD to detect and correct hydraulic fluid contamination of the strut forward dry bay, which could result in hydrogen embrittlement of the titanium forward engine mount bulkhead fittings, and consequent inability of the fittings to carry engine loads, resulting in engine separation. Hydrogen embrittlement also could cause a through-crack formation across the fittings through which an engine fire could breach into the strut, resulting in an uncontained strut fire.
Airworthiness Directives; Zodiac Seats France (formerly Sicma Aero Seat) Passenger Seat Assemblies
Document Number: 2014-23538
Type: Rule
Date: 2014-10-07
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2011-07-05 for certain Sicma Aero Seat 9140, 9166, 9173, 9174, 9184, 9188, 9196, 91B7, 91B8, 91C0, 91C2, 91C4, 91C5, and 9301 series passenger seat assemblies; and Sicma Aero Seat 9501311-05, 9501301-06, 9501311-15, 9501301-16, 9501441-30, 9501441-33, 9501311-55, 9501301-56, 9501441-83, 9501441-95, 9501311-97, and 9501301-98 passenger seat assemblies. AD 2011-07-05 required a general visual inspection for cracking of backrest links, replacement with new links if cracking is found, and eventual replacement of all links with new links. This new AD requires a new general visual inspection for cracking of backrest links, which includes new seat backrest links; replacement with new links if cracking is found; and eventual replacement of all links with new links. This AD was prompted by a report that new seat backrest links could be affected by cracks similar to those identified on the backrest links with the previous design. We are issuing this AD to detect and correct cracks in the backrest links, which could affect the structural integrity of seat backrests. Failure of the backrest links could result in injury to an occupant during emergency landing conditions.