Federal Aviation Administration July 17, 2008 – Federal Register Recent Federal Regulation Documents
Results 1 - 12 of 12
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Pacific Aerospace Limited Model FU-24 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
This amendment adopts a new airworthiness directive (AD), applicable to all EMBRAER Model EMB-120 series airplanes, that requires revising the airplane flight manual to include operational limitations for use of the autopilot, installing two placards that advise the flight crew to check the pitch trim before descent, and modifying the elevator trim system, which would terminate the requirements of the AD. The actions specified by this AD are intended to prevent pitch trim upsets if the pitch trim actuators jam or freeze, which could result in reduced controllability of the airplane. This action is intended to address the identified unsafe condition.
Operating Limitations for Unscheduled Operations at John F. Kennedy International Airport and Newark Liberty International Airport
The FAA tentatively has determined that it is necessary to temporarily limit unscheduled aircraft operations at John F. Kennedy International Airport (JFK) and Newark Liberty International Airport (EWR). By Orders dated January 15 and May 15, 2008, the FAA restricted the number of scheduled operations respectively at JFK and EWR. These orders were a result of persistent congestion and delays at JFK and EWR during the peak operating hours, as well as a dramatic projected increase in fight delays at both airports during the summer of 2008 if proposed schedules were implemented as requested by carriers. The FAA recently published a notice of proposed rulemaking that addresses the operating limits of scheduled and unscheduled operations at both airports for the longer term. The FAA believes that in the interim it is necessary to limit unscheduled operations, as even the addition of a few operations in the critical peak hours can result in added congestion and delay. The intended effect of this action would be consistent with the previously issued Orders governing scheduled operations. This final Order would take effect at 6 a.m., Eastern Time, on August 28, 2008, and would expire at 11:59 p.m., Eastern Time, on October 24, 2009. This proposed Order would implement a reservation system to limit unscheduled operations at the airports and includes special provisions for public charter operations. A final Order would be enforceable under the FAA's civil penalty authority.
Notice of Passenger Facility Charge (PFC) Approvals and Disapprovals
The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR Part 158). This notice is published pursuant to paragraph (d) of Sec. 158.29.
Approval of Noise Compatibility Program; Ocala International Airport; Ocala, FL
The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program submitted by the City of Ocala under the provisions of 49 U.S.C. (the Aviation Safety and Noise Abatement Act, hereinafter referred to as ``the Act'') and 14 CFR part 150. These findings are made in recognition of the description of Federal and nonfederal responsibilities in Senate Report No. 96-52 (1980). On December 28, 2008, the FAA determined that the noise exposure maps submitted by the City of Ocala under part 150 were in compliance with applicable requirements. On June 23, 2008, the FAA approved the Ocala International Airport noise compatibility program. All of the recommendations of the program were approved. No program elements relating to new or revised flight procedures for noise abatement were proposed by the airport operator.
Airworthiness Directives; Fokker Model F27 Mark 050 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 747-400 and 747-400D Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 747-400 and 747-400D series airplanes. This AD requires a general visual inspection of the power feeder wire bundle of the auxiliary power unit (APU) where it crosses the hydraulic system 4 return tube to determine if parts are installed to provide separation between the wire bundle and hydraulic tube. This AD also requires related investigative and corrective actions if necessary. This AD results from a report that the power feeder wire bundle of the APU was found touching the hydraulic system return tube during inspection of an airplane. We are issuing this AD to prevent insufficient clearance between the wire bundle and hydraulic tube that could lead to chafing of the wire bundle, which could cause arcing and a consequent hydraulic fluid fire in an area outside of the smoke detection and fire extinguishing zone; this condition could result in an uncontrolled fire on the airplane.
Airworthiness Directives; 328 Support Services GmbH Dornier Model 328-100 and -300 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A330-200 and A340-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Agusta S.p.A. Model A109E and A119 Helicopters
We are adopting a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model A109E and A119 helicopters. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The European Aviation Safety Agency (EASA), the Technical Agent for Italy, with which we have a bilateral agreement, states in the MCAI: ``Some cases of interference between the hydraulic pipe, P/N 109-0761-65-103, and the tail rotor control rod assembly have been detected on Model A109E helicopters * * * The interference, if not corrected, could damage the hydraulic pipes and lead to the loss of the hydraulic system No. 1 in flight. This AD * * * is issued to extend the same mandatory corrective actions to A119 model due to its design similarity with A109E.'' This AD requires actions that are intended to address this unsafe condition.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.