Federal Aviation Administration September 13, 2005 – Federal Register Recent Federal Regulation Documents

This rule establishes a Class E surface area airspace area extending upward from 700 feet above the surface at Gardner, KS. The effect of this rule is to provide appropriate controlled Class E airspace for aircraft departing from and executing approach procedures to, Gardner Municipal Airport, KS and to segregate aircraft using instrument approach procedures in instrument conditions from aircraft operating in visual conditions.

This action corrects a direct final rule; request for comments that was published in the Federal Register on Friday, July 29, 2005 (70 FR 43741) [FR Doc. 05-21707].

This action establishes Class E airspace at Golovin, AK to provide adequate controlled airspace to contain aircraft executing two new Standard Instrument Approach Procedures (SIAPs) and one new departure procedure. This rule results in new Class E airspace upward from 700 feet (ft.) and 1,200 ft. above the surface at Golovin, AK.

This action revises Class E airspace at Prospect Creek, AK to provide adequate controlled airspace to contain aircraft executing Special Instrument Approach Procedures (SIAPs). This rule results in revised Class E airspace upward from 700 feet (ft.) above the surface at Prospect Creek, AK.

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the City of Dayton for the Dayton International Airport under the provisions of 49 U.S.C. 47501 et seq. Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

The current taxes and fees paid into the Aviation Trust Fund, which provide funding for the National Aviation System, are only authorized through September 30, 2007. Since there is only a small and declining balance in the Trust Fund, it is critical that the financing not be allowed to lapse. The new financing structure should generate stable and predictable revenue, maintain the appropriate levels of service, and enable FAA to make long-term investments and tie revenues raised for the system to the infrastructure and operational costs of the system. The FAA has developed a series of data packages in examining FAA costs, paid for through the Trust Fund, from a managerial reporting standpoint. These packages will advance everyone's understanding of FAA costs and what the Agency faces as it considers a range of future funding options. They are available at https:// www.faa.gov/about /officeorg/ headquartersoffices/aep/aatf/.

The FAA is adopting a new airworthiness directive (AD) for certain Raytheon Aircraft Company Models 1900, 1900C, 1900C (C-12J), and 1900D airplanes. This AD requires you to inspect all elevator hinge support attachments on both left and right elevators for loose and missing rivets, replace rivets if loose or missing rivets are found, inspect the elevator hinge joints for looseness and clearance of each elevator to its stabilizer, correct looseness and clearance if incorrect, and report results of the required inspections. This AD results from a report of excessive movement of the elevator and elevator trim. The hinge support attachment that attaches the elevator to the horizontal stabilizer was loose and had loose and missing rivets. The elevator counterweight horn showed evidence of rubbing against the horizontal stabilizer, indicating possible incorrect clearance. We are issuing this AD to detect and correct any looseness in the elevator hinge support attachments, which could result in binding of the elevator control system. This elevator binding could lead to loss of control of the airplane.