Department of Transportation June 8, 2018 – Federal Register Recent Federal Regulation Documents

Hours of Service (HOS) of Drivers; American Pyrotechnics Assn. (APA); Request To Add New Members to Current APA Exemption; Request for Comments
Document Number: 2018-12355
Type: Notice
Date: 2018-06-08
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
The American Pyrotechnics Association (APA) has requested an exemption for three member companiesArtisan Pyrotechnics Inc., Montana Display Fireworks, Inc., and ZY Pyrotechnics, LLC dba Skyshooter Displays, Inc.from the prohibition on driving commercial motor vehicles (CMVs) after the 14th hour after the driver comes on duty. Fifty APA members currently hold such an exemption during the Independence Day period each year, terminating on July 8, 2020. If granted, this exemption would terminate at the same time as the other 50 exempted carriers. The APA maintains that the terms and conditions of the limited exemption would ensure a level of safety equivalent to, or greater than, the level of safety achieved without the exemption.
Medical Review Board (MRB) Meeting: Public Meeting
Document Number: 2018-12354
Type: Notice
Date: 2018-06-08
Agency: Federal Motor Carrier Safety Administration, Department of Transportation
FMCSA announces a meeting of its Medical Review Board (MRB) on Monday and Tuesday, June 25-26, 2018.
2017 Tax Information for Use in the Revenue Shortfall Allocation Method
Document Number: 2018-12349
Type: Notice
Date: 2018-06-08
Agency: Surface Transportation Board, Department of Transportation
The Board is publishing, and providing the public an opportunity to comment on, the 2017 weighted average state tax rates for each Class I railroad, as calculated by the Association of American Railroads (AAR), for use in the Revenue Shortfall Allocation Method (RSAM).
Notice of Final Federal Agency Actions on Sterling Highway Milepost 45 to 60 Project in Alaska
Document Number: 2018-12342
Type: Notice
Date: 2018-06-08
Agency: Federal Highway Administration, Department of Transportation
This notice announces actions taken by FWHA that are final. The actions relate to the proposed Sterling Highway Milepost 45-60 Project in the Kenai Peninsula Borough in the State of Alaska. Those actions grant approvals for the project.
Amendment of Class B Airspace; San Francisco, CA
Document Number: 2018-12304
Type: Rule
Date: 2018-06-08
Agency: Federal Aviation Administration, Department of Transportation
This action modifies the San Francisco, CA, Class B airspace area to contain aircraft conducting instrument flight rules (IFR) instrument approach procedures to San Francisco International Airport (SFO), San Francisco, CA. The FAA is taking this action to improve the flow of air traffic, enhance safety, and reduce the potential for midair collision in the SFO Class B airspace area while accommodating the concerns of airspace users. Further, this effort supports the FAA's national airspace redesign goal of optimizing terminal and enroute airspace to reduce aircraft delays and improve system capacity.
Establishment of Class E Airspace; Pago Pago, American Samoa
Document Number: 2018-12295
Type: Rule
Date: 2018-06-08
Agency: Federal Aviation Administration, Department of Transportation
This action establishes Class E airspace extending upward from 700 feet above the surface at Pago Pago International Airport, Pago Pago, American Samoa (AS), to accommodate new area navigation (RNAV) procedures at the airport. This action is necessary for the safety and management of instrument flight rules (IFR) operations within the National Airspace System.
Proposed Establishment and Modification of Area Navigation Routes, Florida Metroplex Project; Southeastern United States
Document Number: 2018-12293
Type: Proposed Rule
Date: 2018-06-08
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish 16 high altitude area navigation (RNAV) routes (Q-routes), and modify 7 existing Q-routes, in support of the Florida Metroplex Project. The proposed routes were developed to improve the efficiency of the National Airspace System (NAS) and reduce dependency on ground-based navigational systems that cause system inefficiencies due to their limitations.
Airworthiness Directives; the Boeing Company Airplanes
Document Number: 2018-12279
Type: Rule
Date: 2018-06-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. This AD was prompted by reports of cracks found in the rear spar web and lower chord on the left and right wings. This AD requires repetitive detailed inspections for cracking of the rear spar web and lower chord, and applicable on-condition actions. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2018-12270
Type: Rule
Date: 2018-06-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-300ER series airplanes. This AD requires replacing the water filter assembly in certain steam ovens. This AD was prompted by a report that water can enter the steam oven cavity and become heated and then released when the oven door is opened. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2018-12268
Type: Rule
Date: 2018-06-08
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus Model A318-111 and -112 airplanes; Model A319-111, -112, -113, - 114, and -115 airplanes; Model A320-211, -212, -214, and -216 airplanes; and Model A321-111, -112, -211, -212, and -213 airplanes. This AD was prompted by a review of maintenance instructions for a blend repair of the snout diameter of the main beam assembly of the forward engine mount that would create an excessive gap between the bearing mono-ball and the snout. This AD requires modifying the main beam assembly of the forward engine mount. We are issuing this AD to address the unsafe condition on these products.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.