Department of Transportation September 23, 2016 – Federal Register Recent Federal Regulation Documents

Automotive technology is at a moment of rapid change and may evolve farther in the next decade than in the previous 45-plus year history of the Agency. As the automobile industry moves toward fully automated (self-driving) vehicles and other innovative mobility solutions, NHTSA seeks to facilitate the advance of automated technologies that currently present safety improvements and that, in the future, are likely to improve safety and decrease the number of crashes, traffic fatalities, and serious injuries on U.S. roadways. NHTSA is commanded by Congress to protect the safety of the driving public against unreasonable risks of harm that may occur because of the design, construction, or performance of a motor vehicle or motor vehicle equipment, and to mitigate risks of harm, including risks that may be emerging or contingent. As NHTSA has always done when evaluating new vehicle technologies, the Agency will be guided by its statutory mission, the laws it is obligated to enforce, and the benefits of the emerging automated safety technologies appearing on U.S. roadways. NHTSA has broad enforcement authority under existing statutes and regulations to address existing and emerging automated safety technologies. This Enforcement Guidance Bulletin sets forth NHTSA's current views on its enforcement authorityincluding its view that when vulnerabilities in automated safety technology or equipment pose an unreasonable risk to safety, those vulnerabilities constitute a safety-related defectand suggests guiding principles and best practices for motor vehicle and equipment manufacturers in this context.

NHTSA invites public comment on the document, ``Federal Automated Vehicles Policy.'' This document is intended as a starting point that provides needed initial guidance to industry, government, and consumers. It will necessarily evolve over time, changing based on public comment; the experience of the agency, manufacturers, suppliers, consumers, and others; and/or further technological innovation. NHTSA intends to revise and refine the document within one year, and periodically thereafter, to reflect such public input, experience, and innovation, and will address significant comments received in the next revision of this document.

FMCSA announces its decision to grant ArcelorMittal Indiana Harbor, LLC (ArcelorMittal) exemptions from the hours of service (HOS) and parts and accessories rules. One exemption will allow ArcelorMittal's employee-drivers with commercial driver's licenses (CDLs) who transport steel coils between their production and shipping locations on public roads to work up to 16 hours per day and return to work with less than the mandatory 10 consecutive hours off duty. The other exemption will allow ArcelorMittal to use coil carriers that do not meet the ``heavy hauler trailer'' definition, height of rear side marker lights restrictions, tire loading restrictions, and the coil securement requirements.

Consistent with the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, this document provides notice that FRA is submitting an Information Collection Request (ICR) to the Office of Management and Budget (OMB) to collect information on railroads' implementation of Positive Train Control (PTC) systems on an annual form entitled the Annual PTC Progress Report Form (Form FRA F 6180.166).

Under the Paperwork Reduction Act of 1995 (PRA) and its implementing regulations, FRA seeks approval of the proposed information collection activities described below. Before submitting the proposed information collection requests (ICRs) to the Office of Management and Budget (OMB) for approval, FRA is soliciting public comment on specific aspects of the activities, which are identified in this notice.

A Notice of Intent to prepare an Environmental Impact Statement was published in the Federal Register on May 9, 2012. The Ohio Department of Transportation (ODOT) is issuing this notice to advise the public that ODOT will no longer prepare a Tier 2 EIS for proposed improvements to SR 32 from US 50 in Hamilton County east to IR 275 in Clermont County, because of potential significant environmental impacts and public controversy.

This action proposes to modify Class E surface area at Ankeny Regional Airport, Ankeny, IA; and Class E airspace extending upward from 700 feet above the surface at Algona Municipal Airport, Algona, IA; Ankeny Regional Airport; Atlantic Municipal Airport, Atlantic, IA; Belle Plaine Municipal Airport, Belle Plaine, IA; Creston Municipal Airport, Creston, IA; Estherville Municipal Airport, Estherville, IA; Grinnell Regional Airport, Grinnell, IA; Guthrie County Regional Airport, Guthrie Center, IA; and Oelwein Municipal Airport, Oelwein, IA. Decommissioning of non- directional radio beacons (NDB), cancellation of NDB approaches, and implementation of area navigation (RNAV) procedures have made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. Additionally, the geographic coordinates for Algona Municipal Airport, Atlantic Municipal Airport, and Grinnell Regional Airport would be adjusted to coincide with the FAA's aeronautical database. The name of Belle Plaine, IA, would also be adjusted to correct a misspelling in the legal description.

This action amends Class E Airspace at Indiana, PA, to accommodate the new runway at Indiana County Airport (Jimmy Stewart Field). This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport.

This action amends Class E Airspace at Glasgow, KY as the Beaver Creek Non-Directional Beacon (NDB) has been decommissioned, requiring airspace reconfiguration at Glasgow Municipal Airport. This action enhances the safety and management of Instrument Flight Rules (IFR) operations at the airport. This action also updates the geographic coordinates of the airport.

This notice announces actions taken by FHWA and other Federal agencies that are final within the meaning of 23 U.S.C. 139(l)(1). The actions relate to the proposed Interstate 495 (Long Island Expressway) Rest Area Upgrade Project between Exits 51 & 52 (eastbound) in the Town of Huntington, Suffolk County, New York (NYSDOT Project Identification Number: 0229.14). Those actions rescind the Record of Decision (ROD) and the Final Environmental Impact Statement (FEIS) dated May 21, 2007. The ROD was signed by FHWA on August 6, 2007.

We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 707 airplanes and Model 720 and 720B series airplanes. This proposed AD was prompted by fuel system reviews conducted by the manufacturer. This proposed AD would require modifying the fuel quantity indicating system (FQIS) to prevent development of an ignition source inside the center fuel tank due to electrical fault conditions. We are proposing this AD to prevent ignition sources inside the center fuel tank, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.