Department of Transportation 2010 – Federal Register Recent Federal Regulation Documents

DOT publishes the names of the persons selected to serve on the various Departmental PRBs as required by 5 U.S.C. 4314(c)(4).

This notice announces a public meeting of the Transit Rail Advisory Committee for Safety (TRACS). TRACS is a Federal Advisory Committee established by the Secretary of the Department of Transportation in accordance with the Federal Advisory Committee Act to provide information, advice, and recommendations to the Secretary and the Federal Transit Administrator on matters relating to the safety of public transportation systems.

The FMCSA extends until June 30, 2011, the June 30, 2010, compliance date of its December 29, 2009, final rule concerning the inspection, repair, and maintenance of intermodal equipment (IME), specifically with respect to the requirement for drivers and motor carriers to prepare a driver-vehicle inspection report (DVIR) on an item of IME even if no damage, defects, or deficiencies are discovered by, or reported to, the driver. This action is being taken to provide

In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below will be forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collection and its expected burden. The Federal Register Notice with a 60-day comment period was published on May 26, 2010 (75 FR 29487).

The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 209: In Joint Session with EUROCAE WG-49 ATCRBS/Mode S Transponder MOPS Maintenance.

The FHWA invites public comments about our intention to request the Office of Management and Budget's (OMB) approval of a new information collection that is summarized below under SUPPLEMENTARY INFORMATION. We are required to publish this notice in the Federal Register by the Paperwork Reduction Act of 1995.

On May 4, 2010, the Federal Railroad Administration (FRA) signed the Draft Tier II Environmental Impact Statement for the Southeast High Speed Rail, Richmond, VA to Raleigh, NC (Project). FRA is the lead Federal agency on the Project, and the North Carolina Department of Transportation Rail Division (NCDOT) and the Virginia Department of Rail and Public Transportation (DRPT) are co-lead State agencies. By Federal Register Notice dated June 7, 2010, FRA announced the public hearing schedule for the Project and set the closing date for the comment period as August 30, 2010. Because of the high amount of interest in the Project, FRA, NCDOT and DRPT have decided to extend the comment period to Friday, September 10, 2010.

This action will amend existing Class E airspace at Port Angeles, WA. The Ediz Hook Nondirectional Radio Beacon (NDB) has been decommissioned and removed. This will improve the safety and management of Instrument Flight Rules (IFR) operations at the airport.

This action amends Class D and Class E airspace at Kaneohe Bay Marine Corps Air Station (MCAS), Kaneohe, HI. The FAA is taking this action in response to a request from the National Aeronautical Navigation Services (NANS) to update the geographic coordinates of the MCAS to aid in the navigation of our National Airspace System. This action will also change the airport's name.

This action amends Class E airspace for Litchfield, MN, to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAPs) at Litchfield Municipal Airport, Litchfield, MN. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport.

This action amends Class E airspace for Perham, MN to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAPs) at Perham Municipal Airport. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport.

This action amends Class E airspace for Perryville, MO to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAPs) at Perryville Municipal Airport, Perryville, MO. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at the airport.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (CFR) part 25. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 1990-1996 ALPINA B12 2-door coupe model passenger cars that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they have safety features that comply with, or are capable of being altered to comply with, all such standards.

These special conditions are issued for the AeroMech, Incorporated; Hawker Beechcraft Corporation, model B200 and other part 23 aircraft listed on the AML. These airplanes as modified by AeroMech, Incorporated will have a novel or unusual design feature(s) associated with installation of the Mid-Continent Instruments MD835 Lithium Ion (Li-ion) battery. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

This action proposes to amend Class E airspace at Kennett, MO. Decommissioning of the Kennett non-directional beacon (NDB) at Kennett Memorial Airport has made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the airport.

In accordance with NHTSA's 2007 Motorcoach Safety Plan and DOT's 2009 Departmental Motorcoach Safety Action Plan, NHTSA is issuing this NPRM to propose to amend the Federal motor vehicle safety standard (FMVSS) on occupant crash protection (FMVSS No. 208) to require lap/ shoulder seat belts for each passenger seating position in new motorcoaches. This NPRM also proposes to require a lap/shoulder belt for the motorcoach and large school bus driver's seating positions, which currently are required to have either a lap or a lap/shoulder belt. Although motorcoach transportation overall is a safe form of transportation in the United States, several motorcoach crashes in 2008 have illustrated that motorcoach rollover crashes, while a relatively rare event, can cause a significant number of fatal or serious injuries in a single event. NHTSA's safety research on motorcoach seat belts, completed in 2009, shows that the installation of lap/shoulder belts on motorcoaches is practicable and effective. We believe that the seat belt assemblies that would be installed on motorcoach passenger seats pursuant to this rulemaking could reduce the risk of fatal injuries in rollover crashes by 77 percent, primarily by preventing occupant ejection in a crash.

The FAA proposes to supersede an existing airworthiness directive (AD) for Pratt & Whitney (PW) JT8D-1, -1A, -1B, -7, -7A, -7B,

The FAA publishes a monthly notice, as appropriate, of PFC approvals and disapprovals under the provisions of the Aviation Safety and Capacity Expansion Act of 1990 (Title IX of the Omnibus Budget Reconciliation Act of 1990) (Pub. L. 101-508) and Part 158 of the Federal Aviation Regulations (14 CFR part 158). This notice is published pursuant to paragraph d of Sec. 158.29.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

This document publishes in the Federal Register an amendment adopting Airworthiness Directive (AD) 2010-15-51, which was sent previously to all known U.S. owners and operators of Agusta S.p.A. (Agusta) Model A119 and AW119 MKII helicopters by individual letters. This AD requires, within 5 hours time-in-service (TIS), and thereafter at intervals not to exceed 50 hours TIS, removing the cover of each pilot and co-pilot control box assembly (control box) and inspecting each rotary variable differential transformer (RVDT) control gear locking pin (locking pin) for proper position. If a locking pin is recessed, extended, or missing, this AD requires replacing the control box before further flight. This amendment is prompted by a report that an RVDT locking pin that was installed on a Model AW119 MKII helicopter moved from its proper position, resulting in loss of connectivity of the pilot and co-pilot throttle controls. The actions specified by this AD are intended to prevent the RVDT locking pin from moving from its proper position, which could lead to loss of manual engine throttle control, and subsequent loss of control of the helicopter.