Department of Transportation 2009 – Federal Register Recent Federal Regulation Documents

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

FMCSA announces its decision to exempt twenty-seven individuals from its rule prohibiting persons with insulin-treated diabetes mellitus (ITDM) from operating commercial motor vehicles (CMVs) in interstate commerce. The exemptions will enable these individuals to operate CMVs in interstate commerce.

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009-0054 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the

As authorized by 46 U.S.C. 12121, the Secretary of Transportation, as represented by the Maritime Administration (MARAD), is authorized to grant waivers of the U.S.-build requirement of the coastwise laws under certain circumstances. A request for such a waiver has been received by MARAD. The vessel, and a brief description of the proposed service, is listed below. The complete application is given in DOT docket MARAD-2009-0053 at https://www.regulations.gov. Interested parties may comment on the effect this action may have on U.S. vessel builders or businesses in the U.S. that use U.S.-flag vessels. If MARAD determines, in accordance with 46 U.S.C. 12121 and MARAD's regulations at 46 CFR Part 388 (68 FR 23084; April 30, 2003), that the issuance of the waiver will have an unduly adverse effect on a U.S.-vessel builder or a business that uses U.S.-flag vessels in that business, a waiver will not be granted. Comments should refer to the docket number of this notice and the vessel name in order for MARAD to properly consider the comments. Comments should also state the commenter's interest in the

FMCSA previously announced its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 24 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemptions will provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.

We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for Agusta S.p.A. (Agusta) Model A109E, A109S, A119, and AW119MKII helicopters. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The European Aviation Safety Agency (EASA), the Technical Agent for the aviation authority of Italy, with which we have a bilateral agreement, has issued an MCAI AD which states that two cases of cracks on a certain cargo hook lever (lever) have been reported by the manufacturer of the cargo hook. This lever is a critical structural component of the cargo hook, and a crack could result in inadvertent loss of the cargo

We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is adopting a new airworthiness directive (AD) for all Boeing Model 747 airplanes. This AD requires inspecting for cracks in the left- and right-side Stringer 11 longeron adjacent to the horizontal stabilizer pivot bulkhead, and related investigative and corrective actions if necessary. This AD results from a report of a crack found in the right-side Stringer 11 longeron horizontal flange, adjacent to the horizontal stabilizer pivot bulkhead, during a routine maintenance inspection. We are issuing this AD to detect and correct fatigue cracking of the longeron, which can propagate and cause damage to the adjacent horizontal stabilizer pivot bulkhead. This damage could result in loss of structural integrity and consequent inability of the bulkhead to carry flight loads, which could adversely affect controllability of the airplane.

We are adopting a new airworthiness directive (AD) for certain Boeing Model 737-300, -400, -500, -600, -700, -700C, -800, and -900 series airplanes. This AD requires installing a new circuit breaker, relays, and wiring to allow the flightcrew to turn off electrical power to the in-flight entertainment (IFE) systems and other non-essential electrical systems through a switch in the flight compartment, and doing other specified actions. This AD results from an IFE systems review. We are issuing this AD to ensure that the flightcrew is able to turn off electrical power to IFE systems and other non-essential electrical systems through a switch in the flight compartment. The flightcrew's inability to turn off power to IFE systems and other non- essential electrical systems during a non-normal or emergency situation could result in the inability to control smoke or fumes in the airplane flight deck or cabin.

We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Corporation (RRC) AE 2100D2, AE 2100D2A, AE 2100D3, and AE 2100J turboprop engines with certain propeller gearbox (PGB) shaft-and- carrier assemblies installed. These engines are U.S. type-certificated but as of the effective date of this AD are only installed on military airplanes. This AD requires monitoring a certain population of PGB shaft-and-carrier assemblies for vibration during flight, and borescope-inspecting the PGB shaft for cracks if vibration is experienced. This AD would also require removing the affected population of PGB shaft-and-carrier assemblies from service and installing serviceable PGB shaft-and-carrier assemblies. This AD results from a report of a crack found in the forward cone of a PGB shaft in an RRC AE 2100D3 turboprop engine that was removed from service due to high vibration. We are issuing this AD to prevent separation of the propeller from the airplane, which could result in injury, and damage to the airplane.

The FHWA is issuing this notice to advise the public that an Environmental Impact Statement (EIS) will be prepared for transportation improvements in the USH 41 corridor in Brown County, Wisconsin. The EIS is being prepared in conformance with 40 CFR 1500 and FHWA regulations.

We propose to adopt a new airworthiness directive (AD) for the products listed above that would supersede an existing AD. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:

In accordance with the procedures governing the application for, and the processing of, special permits from the Department of Transportation's Hazardous Material Regulations (49 CFR Part 107, Subpart B), notice is hereby given that the Office of Hazardous Materials Safety has received the application described herein. Each mode of transportation for which a particular special permit is requested is indicated by a number in the ``Nature of Application'' portion of the table below as follows: 1Motor vehicle, 2Rail freight, 3Cargo vessel, 4Cargo aircraft only, 5Passenger-carrying aircraft.

We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 737-300, -400, and -500 series airplanes. This proposed AD would require revising the maintenance program to include new fuel system limitations for airplanes modified in accordance with STC ST00127BO. This AD also requires inspections and checks of the DTSDs and corrective actions, if necessary. This proposed AD results from fuel system reviews conducted by the manufacturer. We are proposing this AD to prevent a potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in a fuel tank fire or explosion and consequent loss of the airplane.

The Surface Transportation Board (STB) publishes the names of the Persons selected to serve on its Senior Executive Service Performance Review Board (PRB).

This action clarifies the Federal Aviation Administration's (FAA) policy on the calculation of derived noise levels submitted for publication in Advisory Circular (AC) 36-3, Estimated Airplane Noise Levels in A-Weighted Decibels. This action is intended to provide guidance on calculating the derived levels used in that publication.

This action amends Class E airspace at Cleveland, OH. Additional controlled airspace is necessary to accommodate Area Navigation (RNAV) Standard Instrument Approach Procedures (SIAP) at Lorain County Regional Airport, Lorain, OH. The FAA is taking this action to enhance the safety and management of Instrument Flight Rule (IFR) operations at Lorain County Regional Airport.

The Federal Aviation Administration (FAA) announces its determination that the noise exposure maps submitted by the city of San Antonio, Texas for San Antonio International Airport under the provisions of 49 U.S.C. 47501 et seq. (Aviation Safety and Noise Abatement Act) and 14 CFR part 150 are in compliance with applicable requirements.

The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 23, 2008, vol. 73, no. 247, page 78866. The information collected on the FAA Form 8120-11 is used by those who wish to report suspected unapproved parts to the FAA for review.