Department of Transportation August 19, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Notice of Request for Reinstatement of an Information Collection
In compliance with the Paperwork Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request, abstracted below, is being forwarded to the Office of Management and Budget for renewal and comment. The ICR describes the nature of the information collection and its expected cost burden. The Federal Register Notice with a sixty day comment period soliciting comments on the following collection of information was published on August 26, 2008 [FR Vol. 73, page 50396]. No comments were received.
Request for OMB Clearance of a New Emergency Information Collection; New Information Collection: ARRA Bonding Assistance Program Reimbursable Fee Program
In compliance with the Paperwork Reduction Act of 1995, Public Law 104-13 (44 U.S.C. 3501 et seq.) this notice announces the Information Collection Request on DOT Form F4504Application for Reimbursement of Bond Fees for this new ARRA DOT program. The notice is being forwarded to the Office of Management and Budget for Emergency Action and approval.
Qualification of Drivers; Exemption Applications; Vision
FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 44 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.
Petition for Declaratory Order by Fullington Trailways, LLC
The Federal Motor Carrier Safety Administration (FMCSA) extends the reply comment period for a Petition for Declaratory Order that was published on June 4, 2009, until September 14, 2009.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135BJ, -135ER, -135KE, -135KL, -135LR, -145, -145EP, 145ER, -145MP, -145MR, -145XR, and 145LR Airplanes Modified in Accordance With Brazilian Supplemental Type Certificate (STC) 2002S06-09, 2002S06-10, or 2003S08-01
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: It was reported that after commanding the landing gear lever to down the three green landing gear positioning indication was displayed followed by the LG/LEVER DISAGREE EICAS [engine indicating and crew alerting system] message. The crew decided to continue the approach and landing procedure. As soon as the crew identified that the landing gear was not extended properly, a go-around procedure was successfully performed. During maneuver, the airplane settled momentarily onto the flaps and belly.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-135 Airplanes; and Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-145, -145ER, -145MR, -145LR, -145XR, -145MP, and -145EP Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: It has been found the occurrence of corrosion on the Auxiliary Power Unit (APU) mounting rods that could cause the APU rod to break, affecting the APU support structure integrity.
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model EMB-120, -120ER, -120FC, -120QC, and -120RT Airplanes
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as: It has been found the occurrence of corrosion on the Auxiliary Power Unit (APU) mounting rods that could cause the APU rod to break, affecting the APU support structure integrity.
Airworthiness Directives; McDonnell Douglas Model MD-11 and MD-11F Airplanes
We propose to adopt a new airworthiness directive (AD) for certain McDonnell Douglas Model MD-11 and MD-11F airplanes. This proposed AD would require a one-time inspection to determine if wires touch the upper surface of the center upper auxiliary fuel tank and marking the location, if necessary; a one-time inspection of all wire bundles above the center upper auxiliary fuel tank for splices and damage; a one-time inspection for damage to the fuel vapor barrier seal and upper surface of the center upper auxiliary fuel tank; and corrective actions, if necessary. This proposed AD would also require installation of nonmetallic barrier/shield sleeving, new clamps, new attaching hardware, and a new extruded channel. This proposed AD results from fuel system reviews conducted by the manufacturer. We are proposing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
