Department of Energy May 2012 – Federal Register Recent Federal Regulation Documents

The Federal Energy Regulatory Commission affirms its basic determinations in Order No. 1000, amending the transmission planning and cost allocation requirements established in Order No. 890 to ensure that Commission-jurisdictional services are provided at just and reasonable rates and on a basis that is just and reasonable and not unduly discriminatory or preferential. This order affirms the Order No. 1000 transmission planning reforms that: Require that each public utility transmission provider participate in a regional transmission planning process that produces a regional transmission plan; provide that local and regional transmission planning processes must provide an opportunity to identify and evaluate transmission needs driven by public policy requirements established by state or federal laws or regulations; improve coordination between neighboring transmission planning regions for new interregional transmission facilities; and remove from Commission-approved tariffs and agreements a federal right of first refusal. This order also affirms the Order No. 1000 requirements that each public utility transmission provider must participate in a regional transmission planning process that has: A regional cost allocation method for the cost of new transmission facilities selected in a regional transmission plan for purposes of cost allocation and an interregional cost allocation method for the cost of new transmission facilities that are located in two neighboring transmission planning regions and are jointly evaluated by the two regions in the interregional transmission coordination process required by this Final Rule. Additionally, this order affirms the Order No. 1000 requirement that each cost allocation method must satisfy six cost allocation principles.

The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential clothes washers. EPCA also requires the U.S. Department of Energy (DOE) to determine whether amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this proposed rule, DOE proposes amended energy conservation standards for residential clothes washers identical to those set forth in a direct final rule published elsewhere in today's Federal Register. If DOE receives adverse comment and determines that such comment may provide a reasonable basis for withdrawing the direct final rule, DOE will publish a notice withdrawing the final rule and will proceed with this proposed rule.

The U.S. Department of Energy (DOE) is holding a public meeting to provide interested parties an opportunity to comment on DOE's proposed modifications to the regulations authorizing the use of alternative methods of determining energy efficiency or energy consumption of various consumer products and commercial equipment.

This notice announces a meeting of the Environmental Management Site-Specific Advisory Board (EM SSAB), Paducah. The Federal Advisory Committee Act (Pub. L. No. 92-463, 86 Stat. 770) requires that public notice of this meeting be announced in the Federal Register.

In this notice of proposed rulemaking (NOPR), the U.S. Department of Energy (DOE) proposes to update its test procedures for showerheads, faucets, water closets, and urinals. Specifically, DOE proposes to incorporate by reference the American Society of Mechanical Engineers/American National Standards Institute (ASME/ANSI) Standard A112.18.1-2011 test procedure for faucets and showerheads, which would replace the 1996 version currently referenced by DOE in its test procedure. DOE also proposes to incorporate by reference ASME/ANSI Standard A112.19.2-2008 procedure for water closets and urinals, which would replace the 1995 version currently referenced by DOE in its test procedure. These updates fulfill DOE's obligation under the Energy Policy and Conservation Act (EPCA) to review its test procedures for covered products at least once every 7 years and either amend the applicable test procedures or publish a determination in the Federal Register not to amend them. DOE also expects that incorporation of the updated procedures will bring DOE's testing requirements more closely in line with current industry practices, reduce the burden associated with testing and reporting test results for these products, and improve the accuracy of test results. For commercial prerinse spray valves, DOE has preliminarily determined that no changes are needed to the existing DOE test procedure in order to accurately measure the water consumption of these products, and proposes to retain the existing procedure without change. However, since the American Society for Testing and Materials (ASTM) reapproved this standard in 2009 as F2324-03 (2009), DOE is proposing to incorporate by reference this most recent version. This action would also satisfy the EPCA requirement for DOE to review the test procedures for these products at least once every 7 years. This notice also announces a public meeting to receive comments on these proposed amendments to the test procedures.

The Energy Policy and Conservation Act of 1975 (EPCA), as amended, prescribes energy conservation standards for various consumer products and certain commercial and industrial equipment, including residential dishwashers. EPCA also requires the U.S. Department of Energy (DOE) to determine whether amended standards would be technologically feasible and economically justified, and would save a significant amount of energy. In this proposed rule, DOE proposes amended energy conservation standards for residential dishwashers identical to those set forth in a direct final rule published elsewhere in today's Federal Register. If DOE receives adverse comment and determines that such comment may provide a reasonable basis for withdrawing the direct final rule, DOE will publish a notice withdrawing the final rule and will proceed with this proposed rule.

DC Energy, LLC (DC Energy) has applied to renew its authority to transmit electric energy from the United States to Canada pursuant to section 202(e) of the Federal Power Act (FPA).

In compliance with the requirements of the Paperwork Reduction Act of 1995, 44 U.S.C. 3506(c)(2)(A), the Federal Energy Regulatory Commission (Commission or FERC) is soliciting public comment on the currently approved information collection, Cogeneration and Small Power ProductionTariff Filings.

The U.S. Department of Energy (DOE) proposes to amend its test procedures for residential dishwashers, dehumidifiers, and conventional cooking products (which includes cooktops, ovens, and ranges) to address the measurement of active mode fan-only energy use. This SNOPR also addresses energy and water use associated with dishwasher water softeners, the energy test cycle for dishwashers with a separate soil- sensing cycle, and the normal cycle definition, power supply and detergent dosing for dishwashers. The proposal would also update the industry test method specified in the dehumidifier test procedure, eliminate measurement of gas pilot light energy use in the cooking products test procedure, and remove an obsolete energy efficiency metric in the dishwasher test procedure.

This serves as public notification of the publication, by the Department of Energy (DOE) of the Electricity Subsector Cybersecurity Risk Management Process guideline. The guideline describes a risk management process that is targeted to the specific needs of electricity sector organizations. The objective of the guideline is to build upon existing guidance and requirements to develop a flexible risk management process tuned to the diverse missions, equipment, and business needs of the electric power industry. The document was posted on May 23, 2012.