September 22, 2020 – Federal Register Recent Federal Regulation Documents

The Secretary of Agriculture is issuing this rule to provide additional assistance under the Coronavirus Food Assistance Program (CFAP) to agricultural producers who continue to be impacted by the effects of the COVID-19 outbreak. This rule specifies the eligibility requirements, payment calculations, and application procedures for a second round of payments (CFAP 2). In addition, it also extends the special payment limitation provisions to trusts and estates for CFAP 1 and amends the provisions regarding applicable year and direct attribution of payments to members of legal entities that qualify for the increased payment limitation.

Notice is hereby given that the U.S. International Trade Commission has determined to institute a modification proceeding in the above-captioned investigation.

Notice is hereby given that the U.S. International Trade Commission has received a complaint entitled Certain Shingled Solar Modules, Components Thereof, and Methods for Manufacturing the Same, DN 3491; the Commission is soliciting comments on any public interest issues raised by the complaint or complainant's filing pursuant to the Commission's Rules of Practice and Procedure.

In compliance with the requirement of the Paperwork Reduction Act of 1995, the Office of the Secretary (OS), Department of Health and Human Services, is publishing the following summary of a proposed collection for public comment.

Effective August 23, 2018, the U.S. Trade Representative imposed additional duties on goods of China with an annual trade value of approximately $16 billion as part of the action in the Section 301 investigation of China's acts, policies, and practices related to technology transfer, intellectual property, and innovation. The U.S. Trade Representative initiated an exclusion process in September 2018 and has granted three sets of exclusions under the $16 billion action. The second set of exclusions was published in September 2019 and will expire on September 20, 2020. On June 25, 2020, the U.S. Trade Representative established a process for the public to comment on whether to extend particular exclusions granted in September 2019 for up to 12 months. This notice announces the U.S. Trade Representative's determination to extend certain exclusions through December 31, 2020.

The FAA is adopting a new airworthiness directive (AD) for certain Airbus SAS Model A318 series airplanes; Model A319-111, -112, - 113, -114, -115, -131, -132, and -133 airplanes; Model A320-211, -212, -214, -216, -231, -232, and -233 airplanes; and Model A321-111, -112, -131, - 211, -212, -213, -231, and -232 airplanes. This AD was prompted by reports of crack findings in and around the fastener holes of the central and lateral window frame upper junction; those cracks were found on fastener holes outside of the inspection area specified in a certain airworthiness limitation item (ALI) task. This AD requires repetitive inspections of the upper junction fastener holes at the lateral window frame for cracking; and for certain airplanes, repetitive inspections of the spotface around the fastener holes for cracking; and corrective actions if necessary; as specified in a European Union Aviation Safety Agency (EASA) AD, which is incorporated by reference. The FAA is issuing this AD to address the unsafe condition on these products.

Notice is hereby given, pursuant to the provisions of the rules and regulations of the U.S. Commission on Civil Rights (Commission) and the Federal Advisory Committee Act (FACA) that a teleconference meeting of the Arizona Advisory Committee (Committee) to the Commission will be held at 12:00 p.m. (Arizona Time) Tuesday, September 29, 2020. The purpose of the meeting is for the Committee to discuss their next project topic.

The Department of Justice (DOJ), Executive Office for Immigration Review (EOIR), will be submitting the following information collection request to the Office of Management and Budget (OMB) for review and approval in accordance with the Paperwork Reduction Act of 1995.

The Department of Justice, Federal Bureau of Investigation, Criminal Justice Information Services Division, will be submitting the following information collection request to the Office of Management and Budget for review and approval in accordance with the Paperwork Reduction Act of 1995.

In accordance with the Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended (``CERCLA''), notice is hereby given that the U.S. Environmental Protection Agency (``EPA''), Region 2, has entered into a proposed settlement, embodied in an Administrative Settlement Agreement and Order on Consent for Removal Action (``Settlement Agreement''), with Consolidated Edison Company of New York, Inc.; Exxon Mobil Corporation and ExxonMobil Oil Corp.; Hess Corporation; International-Matex Tank Terminals LLC; Infineum USA L.P.; Lorco Petroleum Services; National Grid USA; Patrick J. Kelly Drums, Inc.; Philadelphia Gas Works, by the Philadelphia Facilities Management Corporation; Public Service Electric and Gas Company (``PSE&G'') (and its affiliate, PSEG Fossil, LLC); Sasol North America Inc. and Sasol Chemicals (USA) LLC; and Superfund Management Operations, a series of Evergreen Resources Group, LLC on behalf of itself and ETC Sunoco Holdings LLC f/k/a Sunoco, Inc. (collectively ``Respondents'').

In accordance with the Comprehensive Environmental Response, Compensation, and Liability Act of 1980, as amended (``CERCLA''), notice is hereby given by the U.S. Environmental Protection Agency (``EPA''), Region 2, of a proposed cost recovery settlement agreement pursuant to CERCLA, between the EPA and six settling parties (``Settling Parties'') regarding Operable Unit Two of the Diamond Alkali Superfund Site (``Site''), located in or about Essex and Hudson Counties, New Jersey. Pursuant to the proposed cost recovery settlement agreement, each Settling Party shall pay to EPA $280,600.00 for each facility listed for the Settling Party in Appendix A of the proposed settlement agreement to resolve the Settling Party's civil liability under CERCLA, related to Operable Unit Two of the Site for the facility.

The FAA proposes to supersede Airworthiness Directive (AD) 2007-07-03, which applies to certain The Boeing Company Model 747-100, 747-100B, 747-100B SUD, 747-200B, 747-200C, 747-200F, 747-300, 747-400, 747-400D, 747-400F, 747SR, and 747SP series airplanes. AD 2007-07-03 requires repetitive tests to detect hot air leaking from the trim air diffuser ducts or sidewall riser duct assemblies (collectively referred to as TADDs), related investigative actions, and corrective actions if necessary. AD 2007-07-03 also provides an optional terminating action for the repetitive tests. Since the FAA issued AD 2007-07-03, operators reported high temperature composite material TADDs installed as specified in AD 2007-07-03 have also failed. This proposed AD would require repetitive inspections of all TADD material for damage and applicable on-condition actions. The FAA is proposing this AD to address the unsafe condition on these products.

This final rule amends the regulations implementing the National Organ Transplant Act of 1984, as amended (NOTA), to remove financial barriers to organ donation by expanding the scope of reimbursable expenses incurred by living organ donors to include lost wages, and child-care and elder-care expenses incurred by a caregiver. HHS is committed to reducing the number of individuals on the organ transplant waiting list by increasing the number of organs available for transplant. This final rule is associated with Section 8 of the Executive Order (E.O.) 13879 titled ``Advancing American Kidney Health,'' issued on July 10, 2019, which directed HHS to propose a regulation allowing living organ donors to be reimbursed for related lost wages, child-care expenses, and elder-care expenses through the Reimbursement of Travel and Subsistence Expenses Incurred toward Living Organ Donation program authorized under section 377 of the Public Health Service (PHS) Act, as amended.

The Office of Personnel Management (OPM) is adopting its proposed rule to revise the categories of employees for computation of normal cost percentages for certain members of the Capitol Police who are covered by the Federal Employees' Retirement System (FERS) Act of 1986.

The FAA is adopting a new airworthiness directive (AD) for all Airbus Helicopters Deutschland GmbH Model MBB-BK 117 D-2 helicopters. This AD was prompted by a report of an erroneous low rotor revolutions per minute (RPM) indication after establishing a one engine inoperative (OEI) condition. This AD requires a software (SW) modification for the aircraft management computer (AMC). The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is adopting a new airworthiness directive (AD) for certain Leonardo S.p.a. (Leonardo) Model A119 and AW119 MKII helicopters. This AD requires repetitive borescope inspections of the tail rotor gearbox (TGB) and depending on the inspection results, removing the TGB from service. This AD was prompted by reports of corrosion on the internal surface of the 90-degree TGB output shaft. The actions of this AD are intended to address an unsafe condition on these products.

This action proposes to amend Class E surface airspace and Class E airspace extending upward from 700 feet above the surface in DuBois, PA, due to the decommissioning of the Clarion VORTAC and cancellation of the associated approach at DuBois Regional Airport. This action would also update the name of the airport, as well as the name and geographic coordinates of Penn Highlands Healthcare-DuBois Heliport. Controlled airspace is necessary for the safety and management of instrument flight rules (IFR) operations in the area.

Pursuant to section 189.a.(2) of the Atomic Energy Act of 1954, as amended (the Act), the U.S. Nuclear Regulatory Commission (NRC) is publishing this regular biweekly notice. The Act requires the Commission to publish notice of any amendments issued, or proposed to be issued, and grants the Commission the authority to issue and make immediately effective any amendment to an operating license or combined license, as applicable, upon a determination by the Commission that such amendment involves no significant hazards consideration (NSHC), notwithstanding the pendency before the Commission of a request for a hearing from any person. This biweekly notice includes all amendments issued, or proposed to be issued, from August 25, 2020, to September 7, 2020. The last biweekly notice was published on September 8, 2020.

The FAA proposes to adopt a new airworthiness directive (AD) for certain Textron (type certificate previously held by Cessna Aircraft Company) Models 208 and 208B airplanes. This proposed AD was prompted by reports of loose elevator torque tube attach fasteners. This proposed AD would require repetitively inspecting the inboard and outboard elevator torque tube attachments for loose or incorrectly installed fasteners, replacing all fasteners if loose or incorrectly installed fasteners are found, and reporting the inspection results to the FAA. This AD also includes optional actions to terminate the repetitive inspections. The FAA is proposing this AD to address the unsafe condition on these products.

The U.S. Nuclear Regulatory Commission (NRC) is proposing to amend its regulations by revising the NAC International, Inc. MAGNASTOR[supreg] Storage System listing within the ``List of approved spent fuel storage casks'' to include Amendment No. 9 to Certificate of Compliance No. 1031. Amendment No. 9 revises the certificate of compliance to add a new concrete storage overpack; four new heat load zone patterns and their associated decay heats that are specific to Babcock and Wilcox 15x15 fuel assemblies; a new Babcock & Wilcox 15x15 hybrid fuel assembly type (BW15H5); and a new maximum enrichment for the BW15H2 hybrid fuel assembly, including a new minimum soluble boron concentration during loading and unloading operations and neutron absorber areal density. In addition, Amendment No. 9 makes non- technical changes to reorganize Appendix B of the technical specifications.