Requirements and Procedures for Consumer Assistance To Recycle and Save Program
This final rule sets forth requirements and procedures for the voluntary vehicle trade-in and purchase/lease program under the Consumer Assistance to Recycle and Save Act of 2009. This program helps consumers pay for a new, more fuel efficient car or truck from a participating dealer when they trade in a less fuel efficient car or truck. The rule establishes a process by which dealers can register in order to participate in the program and establishes the criteria this agency will use to determine which disposal facilities are eligible to receive and either crush or shred the trade-in vehicles. It also sets forth the criteria that trade-in vehicles and new vehicles must meet in order for purchases and leases to qualify for assistance under this program and establishes the requirements that must be met by consumers, dealers, disposal facilities and others. Finally, the rule sets forth enforcement procedures and provisions for punishing fraud and other violations of the program requirements.
Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components, Correction
NHTSA published in the Federal Register of July 20, 2009, a document delaying the compliance date of the sliding door provisions of a February 6, 2007 final rule. The regulatory text adopted by that document contained errors. This document corrects those errors.
Privacy Act of 1974; System of Records Notice
NHTSA intends to establish a system of records under the Privacy Act of 1974 as part of its Consumer Assistance to Recycle and Save program (CARS program), which implements the Consumer Assistance to Recycle and Save Act of 2009 (CARS Act). The system of records will contain personally identifiable information (PII) about individual car purchasers/lessees and may contain PII about a limited number of sole proprietor automobile salvage auctions and disposal facilities participating in the CARS Program, which is a temporary program covering eligible automobile purchases/leases occurring between July 1, 2009 and November 1, 2009. The system of records is more thoroughly detailed below and in the Privacy Impact Assessment (PIA) that NHTSA will include in the docket for the CARS final rule at https:// www.regulations.gov, being published in the Federal Register on or about July 24, 2009 and on the DOT Privacy Web site at https:// www.dot.gov/privacy.
Federal Motor Vehicle Safety Standards; Air Brake Systems
This document amends the Federal motor vehicle safety standard on air brake systems to improve the stopping distance performance of truck tractors. The rule requires the vast majority of new heavy truck tractors to achieve a 30 percent reduction in stopping distance compared to currently required levels. For these heavy truck tractors (approximately 99 percent of the fleet), the amended standard requires those vehicles to stop in not more than 250 feet when loaded to their gross vehicle weight rating (GVWR) and tested at a speed of 60 miles per hour (mph). For a small number of very heavy severe service tractors, the stopping distance requirement will be 310 feet under these same conditions. In addition, this final rule requires that all heavy truck tractors must stop within 235 feet when loaded to their ``lightly loaded vehicle weight'' (LLVW).
Petition for Exemption from the Vehicle Theft Prevention Standard; Mercedes-Benz
This document grants in full the Mercedes-Benz USA, LLC.'s (MBUSA) petition for exemption of the SLK Class Line Chassis (SLK- Class) vehicle line in accordance with 49 CFR part 543, Exemption from the Theft Prevention Standard. This petition is granted because the agency has determined that the antitheft device to be placed on the line as standard equipment is likely to be as effective in reducing and deterring motor vehicle theft as compliance with the parts-marking requirements of the Theft Prevention Standard (49 CFR part 541).
Ferrari S.p.A and Ferrari North America, Inc.; Grant of Application for Extension of a Temporary Exemption From the Advanced Air Bag Requirements of FMVSS No. 208
This notice grants the Ferrari S.p.A and Ferrari North America, Inc. application for extension of a temporary exemption from some requirements of FMVSS No. 208, Occupant Crash Protection. The exemption applies to the F430 vehicle line. In accordance with 49 CFR part 555, the basis for the grant is that compliance would cause substantial economic hardship to a low-volume manufacturer that has tried in good faith to comply with the standard, and the exemption would have a negligible impact on motor vehicle safety. The exemption is effective through August 31, 2009.
Reports, Forms and Record Keeping Requirements Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on May 14, 2009 [FR Doc. 2009- 0096, Vol. 74, No. 92, Pages 22800-22801].
Reports, Forms, and Recordkeeping Requirements
Before a Federal agency can collect certain information from the public, it must receive approval from the OMB. Under procedures established by the Paperwork Reduction Act of 1995, before seeking OMB approval, Federal agencies must solicit public comment on proposed collections of information, including extensions and reinstatement of previously approved collections.
Federal Motor Vehicle Safety Standards; Door Locks and Door Retention Components
This final rule delays the compliance date of the sliding door provisions of a February 6, 2007 final rule, from September 1, 2009 to September 1, 2010. The February 6, 2007, final rule amended the Federal motor vehicle safety standard on door locks and door retention components to add and update requirements and test procedures and to harmonize with the world's first global technical regulation for motor vehicles. NHTSA received four petitions for reconsideration of that final rule, including two that requested a delay in the effective date of the sliding door provisions of the rule, and others which raised concerns about some of the new test requirements and procedures. To accommodate manufacturers' design and production cycles while allowing the agency more time to analyze the petitions in regards to other issues, the agency is delaying the compliance date of the sliding door provisions of S4.2.2 until September 1, 2010.
Reports, Forms and Record Keeping Requirements; Agency Information Collection Activity Under OMB Review
In compliance with the Paperwork Reduction Act of 1995 (44 U.S.C. 3501 et seq.), this notice announces that the Information Collection Request (ICR) abstracted below has been forwarded to the Office of Management and Budget (OMB) for review and comment. The ICR describes the nature of the information collections and their expected burden. The Federal Register Notice with a 60-day comment period was published on February 19, 2009 [FR Doc. 2009-0037, Vol. 74, No. 32, Pages 7737-7738].
Consumer Assistance To Recycle and Save Act of 2009
To inform consumers, dealers, and other interested persons about the Consumer Assistance to Recycle and Save Act of 2009 (CARS Act or the Act), this agency is publishing a brief summary of the Act's key features in question and answer format. The Act establishes a new program under which the government will provide $3,500 or $4,500 to help consumers purchase or lease a new, more fuel efficient car, van, sport utility vehicle or pickup truck from a participating dealer when they trade in an old, less fuel efficient vehicle. This notice also describes the steps that the agency is taking to enable it to meet its twin responsibilities under the Act: establishing an effective program for promptly making money available under the CARS Act for eligible purchases and leases, and exercising due diligence in guarding against the possibility of fraud.
Vehicle Safety Rulemaking and Research Priority Plan 2009-2011
The purpose of this request for comments is to solicit and acquire public comment on the NHTSA's ``Vehicle Safety Rulemaking and Research Priority Plan 2009-2011.'' The plan is not an exhaustive list. Only programs and projects that are priorities or will take significant agency resources are listed. Furthermore, NHTSA's enforcement, data collection, and analysis programsvital elements in achieving NHTSA's goalshave their own set of priorities that are not listed here. Each of these programs supports NHTSA's rulemaking and research priorities by providing necessary safety data, economic analysis, expertise on test procedures, and technical issues gleaned from enforcement experience. The plan is an internal management tool as well as a means to communicate to the public NHTSA's highest priorities to meet the Nation's motor vehicle safety challenges. Among them are programs and projects involving rollover crashes, children (both inside as well as just near vehicles), motorcoaches and fuel economy that must meet Congressional mandates or Secretarial commitments. NHTSA is also currently in the process of developing a longer-term motor vehicle safety strategic plan that would encompass the period 2012 to 2020., and will be announced in a separate Federal Register notice.