Historic Preservation, Advisory Council July 2015 – Federal Register Recent Federal Regulation Documents

This action proposes to establish restricted area R-2507W, Chocolate Mountains, CA, to support training activities that involve the use of advanced weapons systems. Proposed R-2507W is needed by the United States Marine Corps (USMC) to enhance training and safety requirements in order to maintain, train, and equip combat-ready military forces.

FRA hereby gives notice that it is submitting the following Information Collection request (ICR) to the Office of Management and Budget (OMB) for emergency processing under the Paperwork Reduction Act of 1995. FRA requests that OMB authorize the collection of information identified by July 24, 2015, for a period of 180 days.

This action proposes to modify Class E surface area airspace designated as an extension to the Class C airspace, and Class E airspace extending upward from 700 feet above the surface at Portland International Airport, Portland, OR. After reviewing the airspace, the FAA found the Portland VHF omnidirectional radio range/distance measuring equipment (VOR/DME) and Laker non-directional beacon (NDB) have been decommissioned, thereby necessitating airspace redesign for the safety and management of Instrument Flight Rules (IFR) operations at the airport. This proposal also would correct the geographic coordinates of the airport.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This document announces a decision by the National Highway Traffic Safety Administration that certain 2006-2010 BMW M3 passenger cars (PCs) that were not originally manufactured to comply with all applicable Federal Motor Vehicle Safety Standards (FMVSS) are eligible for importation into the United States because they are substantially similar to vehicles originally manufactured for sale in the United States that were certified by their manufacturer as complying with all applicable FMVSS (the U.S. certified version of the 2006-2010 BMW M3 PC), and they are capable of being readily altered to conform to the standards.

This action proposes to amend Class E airspace at Chillicothe Municipal Airport, Chillicothe, MO; Cuba Municipal Airport, Cuba, MO; Farmington Regional Airport, Farmington, MO; Lamar Municipal Airport, Lamar, MO; Mountain View Airport, Mountain View, MO; Nevada Municipal Airport, Nevada, MO; and Poplar Bluff Municipal Airport, Poplar Bluff, MO. Decommissioning of the non-directional radio beacons (NDB) and/or cancellation of NDB approaches due to advances in Global Positioning System (GPS) capabilities has made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at the above airports. Geographic coordinates are also adjusted at Lamar Municipal Airport, Lamar, MO; and Nevada Municipal Airport, Nevada, MO.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 airplanes. This AD was prompted by fuel system reviews conducted by the manufacturer. This AD requires revising the maintenance or inspection program, as applicable, to incorporate new limitations for fuel tank systems. We are issuing this AD to prevent potential ignition sources within the fuel system, which could result in a fuel tank explosion.

The FAA is issuing this notice to advise the public of the forty-first meeting of the Special Committee 206.

The FAA is issuing this notice to advise the public of the fifth meeting of the Special Committee 230.

The Federal Aviation Administration is reminding operators of jet airplanes weighing 75,000 pounds or less that after December 31, 2015, operations in the contiguous United States may be conducted only with airplanes that comply with at least Stage 3 noise levels. Operators that fail to meet this requirement may be subject to civil penalties. Certain operations of airplanes not meeting Stage 3 may be conducted under special flight authorizations granted by the FAA on a case by case basis.

This action proposes to amend Class E Airspace at Ponce, PR, as the PONCE VHF Omni-Directional Radio Range Tactical Air Navigation Aid, (VORTAC) has been decommissioned, requiring airspace redesign at Mercedita Airport. This action is necessary for the safety and management of instrument flight rules (IFR) operations at the airport.

We are adopting a new airworthiness directive (AD) for all Airbus Model A310-203 airplanes. This AD is intended to complete certain mandated programs intended to support the airplane reaching its limit of validity (LOV) of the engineering data that support the established structural maintenance program. This AD was prompted by reports that side link clevis bolts of the front engine mount do not meet the design service goal (DSG) requirements on airplanes equipped with General Electric Company CF6-80A3 engines. This AD requires repetitive replacement of all side link clevis engine mount bolts. We are issuing this AD to prevent failure of the front engine mount, and consequent possible departure of the engine.

We are revising an airworthiness directive (AD) 2015-06-02 for GA 8 Airvan (Pty) Ltd Model GA8-TC320 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as missing required engine mount fire seal washers, which could reduce the engine retention capability in the event of a fire. We are issuing this AD to require actions to address the unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

The FAA is correcting an airworthiness directive (AD) that published in the Federal Register. That AD applies to all Honeywell International Inc. TPE331-1, -2, -2UA, -3U, -3UW, -5, -5A, -5AB, -5B, - 6, -6A, -10, -10AV, -10GP, -10GT, -10P, -10R, -10T, -10U, -10UA, -10UF, -10UG, -10UGR, -10UR, -11U, -12JR, -12UA, -12UAR, and -12UHR turboprop engines with certain Honeywell part numbers (P/Ns) of Woodward fuel control unit (FCU) assemblies, installed. The AD number in the document headings is incorrect. Additionally, the Amendment number in the regulatory text is incorrect. This document corrects these two errors. In all other respects, the original document remains the same.

The FAA proposes to rule and invite public comment on the land release at the Arnold Palmer Regional Airport, Latrobe, PA under the provision 49 U.S.C. 47125(a).

FMCSA announces its decision to renew the exemptions from the vision requirement in the Federal Motor Carrier Safety Regulations for 5 individuals. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemption renewals will provide a level of safety that is equivalent to or greater than the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.

FMCSA announces its denial of 120 applications from individuals who requested an exemption from the Federal vision standard applicable to interstate truck and bus drivers and the reasons for the denials. FMCSA has statutory authority to exempt individuals from the vision requirement if the exemptions granted will not compromise safety. The Agency has concluded that granting these exemptions does not provide a level of safety that will be equivalent to, or greater than, the level of safety maintained without the exemptions for these commercial motor vehicle (CMV) drivers.

This notice requests comments on a petition by the Aircraft Owner and Pilots Association (AOPA) to revise certain policies concerning flying clubs in the Federal Aviation Administration (FAA) Order 5190.6B, FAA Airport Compliance Manual. As part of its effort to promote flying clubs, AOPA has requested certain revisions to FAA guidance intended to lower barriers for new flying clubs. These revisions allow flight instructors and mechanics who are club members to receive monetary compensation for services provided to club members. On April 3, 2015, the AOPA Senior Vice President for Government Affairs & Advocacy, James W. Coon, wrote to Mr. Randall Fiertz, FAA's Director of the Office of Airport Compliance and Management Analysis proposing revision to FAA guidance regarding compensation for flight instructors and persons maintaining aircraft within the context of flying club operations. AOPA seeks ``to help current flying clubs and airport sponsors comply with the FAA guidance outlined in 5190.6B, and to provide future flying clubs the opportunity to strengthen and unify general aviation pilots.'' AOPA states that its goal is ``to provide guidance that is attainable and ensures educated compliance from all airport users,'' and thus asks for ``updated guidance regarding compensation for flight instructors and maintainers'' because ``flight instructors and aviation mechanics are valuable assets to the aviation industry, and should be granted the privilege of fair compensation for their efforts on a local level.''

Excess Flow Valves (EFVs), which are safety devices installed on natural gas pipelines to reduce the risk of accidents, are currently required for new or replaced gas service lines servicing single-family residences (SFR). PHMSA is proposing to make changes to part 192 to expand this requirement to include new or replaced branched service lines servicing SFRs, multi-family residences, and small commercial entities consuming gas volumes not exceeding 1,000 Standard Cubic Feet per Hour (SCFH). PHMSA is also proposing to require the use of manual service line shut-off valve (e.g., curb valves) for new or replaced service lines with meter capacities exceeding 1,000 SCFH. Finally, PHMSA is proposing that operators notify customers of their right to request installation of an EFV on service lines that are not being newly installed or replaced. PHMSA is proposing to delegate the question of who bears the cost of installing EFVs to service lines that are not being newly installed or replaced to the operator, customer, and the appropriate State regulatory agency.

We propose to supersede Airworthiness Directive (AD) 2009-18- 15 for all Airbus Model A300, A310, and A300 B4-600, B4-600R, and F4- 600R series airplanes, and Model A300 C4-605R Variant F airplanes (collectively called Model A300-600 series airplanes). AD 2009-18-15 currently requires revising the Airworthiness Limitations section (ALS) of the Instructions for Continued Airworthiness (ICA) to require additional life limits and/or replacements for certain main landing gear and nose landing gear components. Since we issued AD 2009-18-15, we have determined that existing maintenance requirements and airworthiness limitations are inadequate to ensure the structural integrity of the airplane. This proposed AD would require revising the maintenance or inspection program to incorporate new maintenance requirements and airworthiness limitations. We are proposing this AD to prevent failure of certain system components, which could result in reduced structural integrity of the airplane.

We are adopting a new airworthiness directive (AD) for certain serial number GE Aviation Czech s.r.o. M601E-11, M601E-11A, and M601F turboprop engines. This AD requires inspection of the reduction gearbox and supporting cone. This AD was prompted by the determination that wear or cracking, and subsequent misalignment of the quill shaft of the engine and the power turbine (PT) shaft, may lead to rupture of the quill shaft, overspeed of the PT, and uncontained engine failure. We are issuing this AD to prevent misalignment and rupture of the quill shaft, which could lead to overspeed of the PT, uncontained engine failure, and damage to the airplane.