Federal Aviation Administration January 2022 – Federal Register Recent Federal Regulation Documents

The FAA is superseding Airworthiness Directive (AD) 2019-03- 26, which applied to certain The Boeing Company Model 737-600, -700, - 700C, -800, -900, and -900ER series airplanes. AD 2019-03-26 required modifying the passenger service units (PSUs) and life vest panels by replacing the existing inboard lanyard and installing two new lanyards on the outboard edge of the PSUs and life vest panels; measuring the distance between the hooks of the torsion spring of the lanyard assembly; replacing discrepant lanyard assemblies; and re-identifying serviceable lanyard assemblies. This AD was prompted by a determination that certain airplanes are listed in the wrong configuration and certain PSUs have not been correctly re-identified. This AD retains the requirements of AD 2019-03-26, and, for certain airplanes, requires an inspection to determine if the re-identified PSU part number is correct, and further re-identification if necessary. The FAA is issuing this AD to address the unsafe condition on these products.

The FAA is superseding Airworthiness Directive (AD) 2020-07- 17, which applied to all Saab AB, Support and Services Model SAAB 2000 airplanes. AD 2020-07-17 required revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations. Since the FAA issued AD 2020-07- 17, it has determined that new or more restrictive airworthiness limitations are necessary. This AD retains the requirements of AD 2020- 07-17 and requires revising the existing maintenance or inspection program, as applicable, to incorporate new or more restrictive airworthiness limitations, as specified in a European Union Aviation Safety Agency (EASA) AD. The FAA is issuing this AD to address the unsafe condition on these products.

The Federal Aviation Administration (FAA) is considering a proposal from the City of Kansas City, MO, to release a 13.94 acre parcel of land from the federal obligation dedicating it to aeronautical use and to authorize this parcel to be used for revenue- producing, non-aeronautical purposes.

These special conditions are issued for the Airbus Helicopters (Airbus) Model AS350B2 and AS350B3 helicopters. These helicopters, as modified by Vector Aerospace Helicopter Services USA (Vector), will have a novel or unusual design feature when compared to the state of technology envisioned in the airworthiness standards for helicopters. This design feature is the installation of a stability augmentation system and automatic flight control system (SAS/AFCS). The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.

The Federal Aviation Administration (FAA) and the National Park Service (NPS) invite interested persons to apply to fill one current and two upcoming vacancies on the National Parks Overflights Advisory Group (NPOAG). This notice invites interested persons to apply for the openings. The current opening is for a representative of Native American tribes. The upcoming openings are for another representative of Native American tribes and a representative of general aviation concerns.

This notice announces a meeting of the Youth Access to American Jobs in Aviation Task Force (YIATF).

The FAA is superseding Airworthiness Directive (AD) 2020-21-01 for certain Airbus Helicopters Model AS-365N2, AS 365N3, EC 155B, EC155B1, and SA-365N1 helicopters. AD 2020-21-01 required modifying the main gearbox (MGB) tail rotor (T/R) drive flange installation. This AD was prompted by several reported occurrences of loss of tightening torque of the Shur-Lok nut, which serves as a retainer of the MGB T/R drive flange. This AD continues to require modifying the MGB T/R drive flange installation, and includes additional helicopters in the applicability for the required actions. The FAA is issuing this AD to address the unsafe condition on these products.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

Notice is given that the Federal Aviation Administration (FAA) is considering a request from the Richland-Lexington Airport District to waive the requirement that 74 acres of surplus property, located at the Columbia Metropolitan Airport be used for aeronautical purposes. Currently, ownership of the property provides for protection of FAR Part 77 surfaces and compatible land use which would continue to be protected with deed restrictions required in the transfer of land ownership.

The FAA is adopting a new airworthiness directive (AD) for certain Cameron Balloons Ltd. (Cameron) fuel cylinders installed on hot air balloons. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI identifies the unsafe condition as quick shut-off (QSO) flanged adaptors manufactured with non-conforming (undersized) threads. This AD immediately requires either replacing the QSO flange adapter or inspecting the fuel cylinder for leakage and taking corrective action, and replacing the QSO flange adapter within 4 months. The FAA is issuing this AD to address the unsafe condition on these products.