Federal Aviation Administration 2017 – Federal Register Recent Federal Regulation Documents

We are adopting a new airworthiness directive (AD) for certain Siemens S.A.S. smoke detectors installed on various transport category airplanes. This AD requires inspection and replacement of the affected smoke detectors. This AD was prompted by a report that the affected smoke detectors failed an acceptance test. We are issuing this AD to correct the unsafe condition on these products.

The FAA is issuing this notice to advise the public of a meeting of Thirty Sixth RTCA SC-216 Plenary.

This notice contains a summary of a petition seeking relief from specified requirements of title 14, Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This action proposes to remove Class E airspace extending upward from 700 feet above the surface at Carter Airport, Pulaski, WI. The FAA is proposing this action due to the cancellation of the instrument procedures into the airport, resulting in the airport no longer qualifying for controlled airspace.

This action amends Class E airspace extending upward from 700 feet or more above the surface at Wellsboro, PA, as the airspace surrounding Wellsboro Johnston Airport was inadvertently removed from the airspace description. This action enhances the safety and management of instrument flight rules (IFR) operations at the airport.

This action establishes temporary restricted area R-5602, over the Fort Sill, OK, R-5601 restricted area complex, to support the U.S. Army Maneuver & Fires Integration Experiment (MFIX) 2018 scheduled for December 2017. MFIX 2018 is planned to exercise hazardous laser operations conducting counter unmanned aircraft systems (UAS) activities. The temporary restricted area will be in effect from December 4 through December 15, 2017.

This action amends Class E airspace at Windsor Locks, CT, by removing the Notice to Airmen (NOTAM) part-time status at Bradley International Airport under Class E airspace designated as an extension to a Class C surface area. This change enhances the safety and management of instrument flight rules (IFR) operations at Bradley International Airport under these Class E airspace designations. This action also updates the geographic coordinates of the airport.

This action establishes Class E airspace at Ellendale, ND. Controlled airspace is necessary to accommodate new special instrument approach procedures developed at Ellendale Municipal Airport, for the safety and management of instrument flight rules (IFR) operations at the airport.

We are superseding Airworthiness Directive (AD) 2009-17-01, which applied to certain Gulfstream Model G-IV, GIV-X, GV-SP airplanes and Model GV airplanes. AD 2009-17-01 required an inspection for sealant applied to the exterior of the auxiliary power unit (APU) enclosure (firewall), and a revision of the airplane flight manual (AFM), as applicable. This AD requires revising the AFM and revising the applicability to include additional airplanes. This AD was prompted by a report indicating that the type design sealant applied to the APU enclosure failed certain tests. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This AD was prompted by a review showing that inadequate clearance may exist between certain electrical wiring and nearby structures. This AD requires an inspection of certain electrical wiring bundles and feeders, modifications, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.

We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This proposed AD was prompted by significant changes made to the airworthiness limitations (AWL) related to fuel tank ignition prevention and the nitrogen generation system. This proposed AD would require revision of the maintenance or inspection program, as applicable, to include the latest revision of the AWLs. We are proposing this AD to address the unsafe condition on these products.

In preparation for the International Civil Aviation Organization's (ICAO) Dangerous Goods Panel (DGP) meeting to be held October 16-October 27, 2017, in Montreal, Canada, the Federal Aviation Administration's (FAA) Office of Hazardous Materials Safety and the Pipeline and Hazardous Materials Safety Administration's (PHMSA) Office of Hazardous Materials Safety announce a public meeting.

The FAA is issuing this notice to advise the public of the renewal of the RTCA Charter (FAA Order 1110.77X) for 6 months, effective September 29, 2017. The Federal Aviation Administration (FAA) is authorized to establish the RTCA advisory committee in accordance with the provisions of the Federal Advisory Committee Act (FACA). The current charter agreement requires that the RTCA manage various Federal subcommittees on behalf of the agency. The objective of the advisory committee is to seek resolution of issues and challenges involving air transportation concepts, requirements, operational capabilities, the associated use of technology, and related considerations to aeronautical operations that affect the future of the Air Traffic Management System and the integration of new technologies.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 757-300 series airplanes. This proposed AD was prompted by reports of scribe line damage on fuselage skin. This proposed AD would require detailed inspections of fuselage skin for the presence of scribe lines, and applicable on-condition actions. We are proposing this AD to address the unsafe condition on these products.

The Federal Aviation Administration (FAA) announces that it has discontinued preparation of an Environmental Impact Statement (EIS) for a construction of a Replacement General Aviation Airport for Mesquite, Nevada. On November 14, 2011, FAA published a notice of suspension of the EIS in the Federal Register (76 FR 70530). The FAA received a letter dated September 27, 2011, from the City of Mesquite, Nevada asking the FAA to suspend any further work on the EIS. The reasons for this action include the local economic conditions in Mesquite and other local fiscal and budgetary constraints. The Mesquite Lands Act of 1988 (the Act), as amended, provided land to the City of Mesquite for the replacement airport, expired on November 14, 2011 and was not extended or renewed by Congress. The original purpose and need for the proposed relocated airport no longer exists. The City of Mesquite, the owner and operator of the existing Mesquite Municipal Airport, has not included a replacement airport in its 5-year Airport Capital Improvement Program. As a result, FAA has determined the proposed replacement General Aviation Airport for Mesquite, Nevada is not ripe for decision at this time.

The FAA is issuing this notice to advise the public of a meeting of Eighty Sixth RTCA SC-147 Plenary Session. This is a subcommittee to RTCA.

The FAA is issuing this notice to advise the public of a meeting of Forty Ninth RTCA SC-206 Plenary. This is a subcommittee to RTCA.

We are adopting a new airworthiness directive (AD) for all Honeywell International Inc. (Honeywell) TFE731-20 and TFE731-40 turbofan engines. This AD was prompted by two fan disks found with a manufacturing-caused flaw. This AD requires removing affected fan disks and replacing fan disks with a part eligible for installation. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for certain Rolls-Royce plc (RR) RB211 Trent 553-61, Trent 553A2-61, Trent 556-61, Trent 556A2-61, Trent 556B-61, Trent 556B2-61, Trent 560-61, and Trent 560A2-61 turbofan engines. This AD requires replacement of the low- pressure compressor (LPC) case A-frame hollow locating pins. This AD was prompted by LPC case A-frame hollow locating pins that may have reduced integrity due to incorrect heat treatment. We are issuing this AD to correct the unsafe condition on these products.

This action modifies Class E airspace extending upward from 700 feet above the surface at Midland International Air and Space Port Airport (formerly Midland International Airport), Midland, TX, due to the closing of Mabee Ranch Airport, decommissioning of the Mabee non- directional radio beacon (NDB), and cancellation of NDB approaches at Mabee Ranch Airport. Additionally, this action establishes Class E airspace extending upward from 700 feet above the surface at Odessa Airport-Schlemeyer Field, Odessa, TX and Midland Airpark, Midland, TX, to accommodate special instrument approach procedures developed at these airports to enhance the safety and management of standard instrument approach procedures for instrument flight rules (IFR) operations. Also, an editorial change is made to the Class E surface area airspace legal description replacing Airport/Facility Directory with the term Chart Supplement. In addition, the airport name is changed to Midland International Air and Space Port Airport to coincide with the FAA's aeronautical database.

This action proposes to amend Class D airspace and establish Class E airspace designated as a surface area at University of Oklahoma Westheimer Airport, Norman, OK. The University of Oklahoma Westheimer Airport requested establishment of this airspace. This action would also amend Class E airspace extending upward from 700 feet above the surface at the University of Oklahoma Westheimer Airport, Norman, OK, contained within the Oklahoma City, OK, airspace description, by removing the Oklahoma Westheimer Airport ILS localizer and realigning the southwest segment. Additionally, the name of the University of Oklahoma Westheimer Airport would be updated to coincide with the FAA's aeronautical database in Class D airspace. This action is necessary for the safety and management of instrument flight rules (IFR) operations at the airport.

We are revising an earlier notice of proposed rulemaking (NPRM) for all Airbus Model A318-111 and -112 airplanes; Model A319- 111, -112, -113, -114, and -115 airplanes; Model A320-211, -212, and - 214 airplanes; and Model A321-111, -112, -211, -212, and -213 airplanes. This action revises the NPRM by expanding the list of affected engine fan cowl door (FCD) part numbers and adding Airbus Model A320-216 airplanes to the applicability. We are proposing this Airworthiness Directive (AD) to address the unsafe condition on these products. Since these actions impose an additional burden over those proposed in the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model DHC-8-401 and -402 airplanes. This AD was prompted by the discovery of cracking on two test spoiler power control unit (PCU) manifolds during testing by the manufacturer. This AD requires replacement of affected spoiler PCUs. We are issuing this AD to address the unsafe condition on these products.

We are adopting a new airworthiness directive (AD) for all Airbus Defense and Space S.A. Model CN-235, CN-235-100, CN-235-200, and CN-235-300 airplanes; and Model C-295 airplanes. This AD was prompted by reports of leakage of motorized cross-feed fuel valves. This AD requires repetitive inspections and operational checks of the affected fuel valves, and corrective actions if necessary. We are issuing this AD to address the unsafe condition on these products.

The Federal Aviation Administration (FAA) is requesting public comment on a request by the County of Harnett of North Carolina, owner of the Harnett Regional Jetport, to change a portion of airport property from aeronautical to non-aeronautical use at the Harnett Regional Jetport. The request consists of approximately 2.49 acres to Piedmont Natural Gas Company, Inc. for use as a permanent utility easement for the installation of a gas line.