Federal Aviation Administration July 2017 – Federal Register Recent Federal Regulation Documents

Results 51 - 100 of 128
Amendment of Class E Airspace; Orange City, IA
Document Number: 2017-15273
Type: Rule
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
This action modifies Class E airspace extending up to 700 feet above the surface at Orange City Municipal Airport, Orange City, IA. Airspace reconfiguration is necessary due to the decommissioning of the Orange City non directional radio beacon (NDB), and cancellation of the NDB approach. This action enhances the safety and management of standard instrument approach procedures for instrument flight rules (IFR) operations at the airport.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-15121
Type: Rule
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 787-8 and 787-9 airplanes. This AD was prompted by wire harness chafing on the electro-mechanical actuators (EMAs) for certain spoilers due to insufficient separation with adjacent structure. This AD requires replacement of affected EMAs. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-15119
Type: Rule
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2014-08-02 which applied to certain Airbus Model A300 B4-600 and A300 B4-600R series airplanes. AD 2014-08-02 required modifying the profile of stringer run-outs of both wings, including a high frequency eddy current (HFEC) inspection of the fastener holes for defects, and repairs if necessary. This new AD retains the actions required by AD 2014-08-02 and revises the compliance times. This AD was prompted by further analysis in the context of widespread fatigue damage (WFD), which concluded that shorter compliance times are necessary to meet specified requirements to address WFD. We are issuing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received; Lauren Pelicano: Child Restraint System
Document Number: 2017-15087
Type: Notice
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters
Document Number: 2017-15033
Type: Rule
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Sikorsky Aircraft Corporation (Sikorsky) Model S-92A helicopters. This AD requires installing an engine flame detector bracket assembly and harness assembly. This AD was prompted by reports of false fire warnings. The actions of this AD are intended to prevent an unsafe condition on these products.
Airworthiness Directives; Sikorsky Aircraft Corporation Helicopters (Type Certificate Previously Held by Schweizer Aircraft Corporation)
Document Number: 2017-15032
Type: Rule
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
We are superseding airworthiness directive (AD) 93-17-13 for Schweizer Aircraft Corporation and Hughes Helicopters, Inc. (now Sikorsky Aircraft Corporation) (Sikorsky) Model TH55A, 269A, 269A-1, 269B, and 269C helicopters. AD 93-17-13 required installing tachometer markings and inspecting the lower coupling driveshaft (driveshaft). This new AD requires repetitive inspections of the driveshaft and expands the applicability to include Model 269C-1 helicopters. This AD is prompted by reports of accidents because of driveshaft failures. The actions of this AD are intended to prevent the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-14929
Type: Rule
Date: 2017-07-21
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777 airplanes. This AD was prompted by reports of uncommanded altitude display changes in the mode control panel (MCP) altitude window. This AD requires replacing the existing MCP with a new MCP having a different part number. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-15120
Type: Proposed Rule
Date: 2017-07-20
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2017-02- 03, which applies to certain The Boeing Company Model 767-200, -300, and -400ER series airplanes. AD 2017-02-03 requires inspection of the plastic potable water coupling, and corrective actions if necessary; installation of new spray shrouds; and inspection of previously installed spray shields, and related investigative and corrective actions if necessary. Since we issued AD 2017-02-03, we have determined that it is necessary to modify a hose assembly installation for certain airplanes, and add airplanes to the applicability. This proposed AD would add airplanes to the applicability and, for certain airplanes, require hose assembly removals and installations. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bell Helicopter Textron, Inc. (Bell) Helicopters
Document Number: 2017-15031
Type: Rule
Date: 2017-07-20
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for Bell Model 212 and Model 412 helicopters. This AD requires replacing certain oil and fuel check valves and prohibits installing them on any helicopter. This AD is prompted by a report of cracked or leaking check valves. These actions are intended to address an unsafe condition on these helicopters.
Petition for Exemption; Summary of Petition Received; General Electric Company
Document Number: 2017-15158
Type: Notice
Date: 2017-07-19
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Rolls-Royce plc
Document Number: 2017-15157
Type: Notice
Date: 2017-07-19
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Title 14, Code of Federal Regulations (14 CFR). The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received; Mr. Edward Silva
Document Number: 2017-15074
Type: Notice
Date: 2017-07-19
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-14588
Type: Rule
Date: 2017-07-19
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Airbus Model A321 series airplanes. This AD was prompted by a determination from fatigue testing that cracks could develop in the cabin floor beam junction at certain fuselage frame locations. This AD requires repetitive inspections for cracking in the cabin floor beam junction at certain fuselage frame locations, and repair if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-14584
Type: Rule
Date: 2017-07-19
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 737-600, -700, -700C, -800, -900, and -900ER series airplanes. This AD was prompted by a report of an aborted takeoff because the rudder pedals were not operating correctly. Investigation revealed a protruding screw in the rudder pedal heel rest adjacent to the pedals. This AD requires a torque check of the screws in the cover assembly of the heel rest for both the Captain and the First Officer's rudder pedals, and corrective action if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Fokker Services B.V. Airplanes
Document Number: 2017-14583
Type: Rule
Date: 2017-07-19
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for all Fokker Services B.V. Model F28 Mark 0100 airplanes. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that certain wing fuel tank access panels are subject to widespread fatigue damage (WFD). This AD requires replacement of affected access panels and modification of the coamings of the associated access holes. We are issuing this AD to address the unsafe condition on these products.
Special Conditions: Pilatus Aircraft Ltd., PC-24, Autothrust System
Document Number: 2017-14938
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Pilatus Aircraft Ltd. PC-24 airplane. This airplane will have a novel or unusual design feature associated with installation of an autothrust system. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Pilatus Aircraft Ltd., PC-24; Pressure Defuel System
Document Number: 2017-14937
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Pilatus Aircraft Ltd. model PC-24 airplane. This airplane will have a novel or unusual design feature associated with installation of a pressure fueling system with defuel capability. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Special Conditions: Pilatus Aircraft Ltd., PC-24; Electronic Engine Control (EEC)
Document Number: 2017-14936
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
These special conditions are issued for the Pilatus Aircraft Ltd. PC-24 airplane. This airplane will have a novel or unusual design features associated with installation of an electronic engine control. The applicable airworthiness regulations do not contain adequate or appropriate safety standards for this design feature. These special conditions contain the additional safety standards that the Administrator considers necessary to establish a level of safety equivalent to that established by the existing airworthiness standards.
Petition for Exemption; Summary of Petition Received
Document Number: 2017-14898
Type: Notice
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Recommendations for Facilities Realignments To Support Transition to NextGen as Part of Section 804 of the FAA Modernization and Reform Act of 2012-Part 3; Request for Comments
Document Number: 2017-14872
Type: Notice
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
This document announces the availability of the FAA National Facilities Realignment and Consolidation Report, Part 3. The report was developed in response to Section 804 of the FAA Modernization and Reform Act of 2012. The report and recommendations contained therein have been developed collaboratively with the National Air Traffic Controllers Association (NATCA) and the Professional Aviation Safety Specialists (PASS) labor unions and with input from stakeholders. The FAA seeks comments on this report.
Airworthiness Directives; Embraer S.A. Airplanes
Document Number: 2017-14795
Type: Proposed Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Embraer S.A. Model ERJ 170 airplanes and Model ERJ 190-100 STD, -100 LR, -100 IGW, -200 STD, -200 LR, and -200 IGW airplanes. This AD requires repetitive detailed inspections of the web aft face of the forward pressure bulkhead for any cracking and discrepancy; and modification of the forward pressure bulkhead, which would terminate the repetitive inspections. This AD was prompted by an evaluation by the design approval holder (DAH) indicating that the forward bulkhead is subject to widespread fatigue damage (WFD). We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; International Aero Engines AG Turbofan Engines
Document Number: 2017-14706
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain International Aero Engines AG (IAE) V2522-A5, V2524-A5, V2527-A5, V2527E-A5, V2527M-A5, V2530-A5, V2533-A5, V2525-D5, V2528-D5, and V2531-E5 turbofan engines. This AD was prompted following a self- disclosure by IAE regarding manufacturing quality escapes. This AD requires replacing the affected and suspect parts within the time limits specified in the compliance section. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-14704
Type: Proposed Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to remove Airworthiness Directive (AD) 2017-01-06, which applies to certain Airbus Model A319-115, A319-132, A320-214, A320-232, A321-211, A321-213, and A321-231 airplanes. AD 2017-01-06 requires inspection and replacement of certain tie rod assemblies installed on the hinged fairing assembly of the main landing gear (MLG). We issued AD 2017-01-06 to detect and correct the absence of cadmium plating on the rod end threads of the tie rod assemblies. Since we issued AD 2017-01-06, we have determined that although cadmium plating might be absent, the rod end threads of the tie rod assemblies can withstand the expected environmental conditions, therefore the unsafe condition, as initially determined, does not exist.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-14698
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc., Model BD-100-1A10 airplanes. This AD requires removing the fasteners attaching the machined center fitting to the rear spar frame lower flange splice, inspecting the fasteners and fastener holes for damage, reworking and repairing the fastener holes, as applicable, and replacing the fasteners. This AD was prompted by a report indicating that certain fasteners attaching the machined rear spar center fitting to the frame were installed with a gap between the fastener head and the structure, or were installed tilted. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes
Document Number: 2017-14595
Type: Proposed Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Gulfstream G150 airplanes. This proposed AD was prompted by a report that the main entrance door (MED) opened during flight, and by the determination that the ``CABIN DOOR UNLOCK'' crew alerting system (CAS) message may extinguish before the handle latch pin is fully engaged. This proposed AD would require accomplishing an updated rigging procedure for the adjustment of the MED microswitch. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Gulfstream Aerospace LP (Type Certificate Previously Held by Israel Aircraft Industries, Ltd.) Airplanes
Document Number: 2017-14594
Type: Proposed Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Gulfstream Aerospace LP Model Gulfstream 100, Astra SPX, and 1125 Westwind Astra airplanes. This proposed AD was prompted by a report that the main entrance door (MED) opened during flight, and by the determination that the ``CABIN DOOR UNLOCK'' crew alerting system (CAS) message may extinguish before the handle latch pin is fully engaged. This proposed AD would require accomplishing an updated rigging procedure for the adjustment of the MED microswitch. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-14593
Type: Proposed Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc., Model CL-600-1A11 (CL-600), CL-600-2A12 (CL- 601 Variant), and CL-600-2B16 (CL-601-3A and CL-601-3R Variants) airplanes. This proposed AD was prompted by a report of laminated shims that may have been improperly installed at a certain wing tie beam. This proposed AD would require revising the maintenance or inspection program to incorporate certification maintenance requirement tasks that introduce revised checks of the tie beam. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-14470
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model MD-11 and MD-11F airplanes. This AD was prompted by report of fuel odor in the cabin. Fuel was found leaking from a cracked fuel line shroud in the left cargo compartment equipment tunnel. This AD requires a check for the presence of fuel at the fuel shroud drain; a high frequency eddy current (HFEC) inspection for cracked fuel line shrouds; a pressure test of the drain system of the tail tank fuel shroud and a pressure test of the drain system of the aft fuselage fuel shroud to determine cracking; and corrective actions, if necessary. We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-14469
Type: Rule
Date: 2017-07-17
Agency: Federal Aviation Administration, Department of Transportation
We are superseding Airworthiness Directive (AD) 2007-13-08, for certain Airbus Model A318, A319, A320, and A321 series airplanes. AD 2007-13-08 required repetitive inspections of the auxiliary power unit (APU) starter motor, APU inlet plenum, and APU air intake for discrepancies; repetitive cleaning of the APU air intake; and applicable corrective actions. This AD expands the applicability of AD 2007-13-08, and includes an optional terminating installation for the repetitive actions. This AD was prompted by a determination that the unsafe condition could occur on additional airplanes. We are issuing this AD to address the unsafe condition on these products.
Petition for Exemption; Summary of Petition Received
Document Number: 2017-14813
Type: Notice
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Thirty Third RTCA SC-216 Aeronautical Systems Security Plenary
Document Number: 2017-14798
Type: Notice
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of Thirty Third RTCA SC-216 Aeronautical Systems Security Plenary.
Amendment of Class D and E Airspace for the Following Texas Towns; Sherman, TX; and Temple, TX, and Establishment of Class E Airspace, Temple, TX
Document Number: 2017-14716
Type: Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
This action: Amends Class D airspace at North Texas Regional Airport/Perrin Field, Sherman, TX; amends Class E airspace designated as a surface area at Draughon-Miller Central Texas Regional Airport, Temple, TX; amends Class E airspace extending upward from 700 feet above the surface at North Texas Regional Airport/Perrin Field, and Draughon-Miller Central Texas Regional Airport; and establishes Class E airspace designated as an extension at Draughon-Miller Central Texas Regional Airport. Cancellation of standard instrument approach procedures at these airports has made this action necessary for the safety and management of Instrument Flight Rules (IFR) operations at these airports. Additionally, geographic coordinates, names of airports, and a navigation aid are being adjusted to coincide with the FAA's aeronautical database.
Airworthiness Directives; Dassault Aviation Airplanes
Document Number: 2017-14592
Type: Proposed Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Dassault Aviation Model FALCON 7X airplanes. This proposed AD was prompted by a report indicating that fuselage panels were manufactured with defects that could reduce panel fatigue limits. This proposed AD would require a one-time inspection of the affected panels and corrective actions if necessary. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; Bombardier, Inc., Airplanes
Document Number: 2017-14591
Type: Proposed Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We are revising an earlier proposal for certain Bombardier, Inc., Model DHC-8-401 and -402 airplanes. This action revises the notice of proposed rulemaking (NPRM) by adding certain airplanes to the applicability and adding specified actions. We are proposing this airworthiness directive (AD) to address the unsafe condition on these products. Since these changes increase the scope of the NPRM, we are reopening the comment period to allow the public the chance to comment on these proposed changes.
Airworthiness Directives; Airbus Airplanes
Document Number: 2017-14590
Type: Proposed Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2009-18- 16, for certain Airbus Model A310-203, -204, -221, -222, -304, -322, - 324, and -325 airplanes. AD 2009-18-16 requires an inspection for cracking of certain fastener holes on certain frames, and related investigative and corrective actions if necessary; and modification of certain fastener holes. Since we issued AD 2009-18-16, an evaluation by the design approval holder (DAH) indicated that the compliance times should be reduced. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; The Boeing Company Airplanes
Document Number: 2017-14582
Type: Proposed Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300, and -300ER series airplanes. This proposed AD was prompted by reports of corrosion in the aft fuselage. This proposed AD would require a one-time review of the operator's maintenance procedures, repetitive detailed internal and external inspections for corrosion or cracking, and applicable on- condition actions. This proposed AD would also include an optional terminating action for the inspections. We are proposing this AD to address the unsafe condition on these products.
Airworthiness Directives; GEVEN S.p.A., Seat Assemblies, Type D1-02 and D1-03
Document Number: 2017-14546
Type: Proposed Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Geven S.p.A., Type D1-02 and D1-03 seat assemblies. This proposed AD was prompted by a report that seat belt attachment bolts were found detached or partially detached from the seat. This proposed AD would require inspection, torque verification, and modification of certain model seats. We are proposing this AD to correct the unsafe condition on these products.
Airworthiness Directives; CFM International S.A. Turbofan Engines
Document Number: 2017-14545
Type: Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We are adopting a new airworthiness directive (AD) for certain CFM International S.A. (CFM) CFM56-3, -3B, and -3C turbofan engines. This AD was prompted by a report of dual-engine loss of thrust control (LOTC) that resulted in an air turn back. This AD requires initial and repetitive checks of the variable stator vane (VSV) actuation system in the high-pressure compressor (HPC). We are issuing this AD to address the unsafe condition on these products.
Airworthiness Directives; Airbus Helicopters (Previously Eurocopter France)
Document Number: 2017-14373
Type: Proposed Rule
Date: 2017-07-14
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 2009-25- 07 for Airbus Helicopters Model EC120B helicopters. AD 2009-25-07 currently requires amending the rotorcraft flight manual supplement (RFMS) and pre-flight checking the emergency flotation gear before each flight over water. Since we issued AD 2009-25-07, Airbus Helicopters developed a terminating action and identified an additional part- numbered emergency floatation gear part with the unsafe condition. This proposed AD would retain the requirements of AD 2009-25-07, expand the applicability, and add a terminating action for the repetitive inspections. The actions of this proposed AD are intended to correct the unsafe condition on these helicopters.
Petition for Exemption; Summary of Petition Received; Richard Bundy
Document Number: 2017-14715
Type: Notice
Date: 2017-07-13
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Petition for Exemption; Summary of Petition Received
Document Number: 2017-14649
Type: Notice
Date: 2017-07-13
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of Federal Aviation Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of the FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Approval of Noise Compatibility Program for Akron-Canton Airport, North Canton, Ohio
Document Number: 2017-14637
Type: Notice
Date: 2017-07-13
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings on the noise compatibility program submitted by Akron-Canton Airport. On July 22, 2016, the FAA determined that the noise exposure maps submitted by Akron-Canton Airport Authority were in compliance with applicable requirements. On January 13, 2017 the FAA approved the Akron-Canton Airport noise compatibility program. All of the recommendations of the program were approved. No program elements relating to new or revised flight procedures for noise abatement were proposed by the airport operator.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2017-14521
Type: Rule
Date: 2017-07-13
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
Document Number: 2017-14519
Type: Rule
Date: 2017-07-13
Agency: Federal Aviation Administration, Department of Transportation
This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Proposed Amendment of Class E Airspace, for Stevens Point, WI
Document Number: 2017-14527
Type: Proposed Rule
Date: 2017-07-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to modify Class E airspace extending upward from 700 feet above the surface at Stevens Point Municipal Airport, Stevens Point, WI. Airspace reconfiguration is necessary due to the decommissioning of the Stevens Point col-located VHF Omnidirectional Range Tactical Air Navigation System (VORTAC) and cancellation of the VOR approaches.
Proposed Amendment of VOR Federal Airways V-16, V-31, V-93, V-157, V-213, and V-229 in the Vicinity of Patuxent River, MD
Document Number: 2017-14524
Type: Proposed Rule
Date: 2017-07-12
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to amend VHF Omnidirectional Range (VOR) Federal airways V-16, V-31, V-93, V-157, V-213, and V-229 near Patuxent River, MD. The modifications are required due to the planned decommissioning of the Patuxent VORTAC, Patuxent River, MD, navigation aid, which provides navigation guidance for portions of the above routes.
Agency Information Collection Activities: Requests for Comments; Clearance of Renewed Approval of Information Collection: Air Traffic Slots Management
Document Number: 2017-14046
Type: Notice
Date: 2017-07-12
Agency: Federal Aviation Administration, Department of Transportation
In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval of a new information collection. The FAA collects information to allocate slots and maintain accurate records of slot transfers at slot-controlled and schedule-facilitated airports. The information is provided by air carriers and other operators at all impacted airports.
Public Notice for Waiver of Aeronautical Land Use Assurance Arlington Municipal Airport, Arlington, WA
Document Number: 2017-14523
Type: Notice
Date: 2017-07-11
Agency: Federal Aviation Administration, Department of Transportation
Notice is being given that the FAA is considering a proposal from the City of Arlington Airport Director to change certain portions of the airport from aeronautical use to non-aeronautical use at Arlington Municipal Airport, Arlington, WA. The proposal consists of ten parcels on the east side of the airfield adjacent to 59th Avenue, Northeast.
FAA Approval of Noise Compatibility Program; Westfield-Barnes Regional Airport, Westfield, Massachusetts
Document Number: 2017-14522
Type: Notice
Date: 2017-07-11
Agency: Federal Aviation Administration, Department of Transportation
The Federal Aviation Administration (FAA) announces its findings on the Noise Compatibility Program submitted by the City of Westfield under the provisions of Title I of the Aviation Safety and Noise Abatement Act of 1979. On June 14, 2017 the New England Region Airports Division Manager approved the Noise Compatibility Program under Part 150. On December 22, 2015, the FAA had determined the noise exposure maps submitted by the City of Westfield were in compliance with applicable requirements of Part 150.
Notice of Opportunity for Public Comment on Disposal of 4.9 Acres of Airport Land at Southbridge Municipal Airport in Southbridge, MA
Document Number: 2017-14520
Type: Notice
Date: 2017-07-11
Agency: Federal Aviation Administration, Department of Transportation
Notice is being given that the FAA is considering a request from the Town of Southbridge, MA, to dispose of a 4.9 acre parcel of airport land. The parcel, located on the southwest side of the airport, is segregated by Barefoot Road and not contiguous with the main airport parcel. The 4.9 acre parcel is located adjacent to the Town owned landfill and is not suited for aeronautical use as a wetland and Barefoot Road lie between the airport proper and the 4.9 acre parcel. The disposal of this property will have no effect on aviation land or future development opportunities for the airport. An avigation easement will be placed on the land to protect the airport's airspace. The property has a fair market value of $130,000. The Town installed a new sewer line and pump station to serve the airport terminal building and restaurant at a value of $844,000 and as such, the in-kind services substantiates the fair market value of the land to be transferred to the Town.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.