Federal Aviation Administration 2015 – Federal Register Recent Federal Regulation Documents

We are adopting a new airworthiness directive (AD) for certain Bombardier, Inc. Model DHC-8-400 series airplanes. This AD was prompted by a report that during production, an incorrect clevis was used, resulting in improper installation onto the alternate release cable of the main landing gear (MLG). This AD requires a detailed visual inspection of the emergency release clevis of the MLG to determine if an incorrect clevis has been installed, and if necessary, replacing the clevis with a correct clevis and clevis pin. We are issuing this AD to detect and correct improper installation of the clevis, which could cause loss of the alternate release system and prevent the MLG from extending and retracting, and could consequently affect the airplane's continued safe flight and landing.

We are adopting a new airworthiness directive (AD) for certain ATR-GIE Avions de Transport R[eacute]gional Model ATR72-212A airplanes. This AD requires inspection of the shock mount pick-up fittings and cone bolts, and replacement of certain shock mount pick-up fittings if necessary. This AD was prompted by reports of several cases of engine shock mount pick-up fittings with cracks or failure on the engine left- hand (LH) aft side attachment. We are issuing this AD to detect and correct an aft side attachment pick-up fitting failure associated with a cone bolt failure that could reduce the structural integrity of the concerned engine nacelle, and possibly result in detachment of the engine and consequent reduced control of the airplane.

The FAA is amending the authority citation for part 71 and part 73 by adding an additional citation at the beginning of the authority citation string. This action updates and clarifies the Administrator's rulemaking authority to be consistent with other parts of Title 14, Code of Federal Regulations.

We propose to adopt a new airworthiness directive (AD) for Przedsiebiorstwo Doswiadczalno-Produkcyjne Szybownictwa ``PZL-Bielsko'' Model SZD-50-3 ``Puchacz'' sailplanes. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as detachment of the rudder cable fitting block from the fuselage. We are issuing this proposed AD to require actions to address the unsafe condition on these products.

This notice announces the availability of eleven revised consensus standards relating to the provisions of the Sport Pilot and Light-Sport Aircraft rule issued July 16, 2004, and effective September 1, 2004. ASTM International Committee F37 on Light Sport Aircraft developed the revised standards with Federal Aviation Administration (FAA) participation. By this notice, the FAA finds the revised standards acceptable for certification of the specified aircraft under the provisions of the Sport Pilot and Light-Sport Aircraft rule.

We propose to adopt a new airworthiness directive (AD) for certain Airbus Model A318, A319, and A320 series airplanes modified by a particular supplemental type certificate (STC). This proposed AD was prompted by reports of cracks found during inspections of the in-flight entertainment system radome assembly. This proposed AD would require repetitive detailed inspections for cracks in the radome assembly, and replacement of the radome if necessary. We are proposing this AD to detect and correct cracks in the radome assembly, which could result in the radome (or pieces) separating from the airplane and striking the tail, consequently reducing the controllability of the airplane.

We propose to supersede Airworthiness Directive (AD) 2011-07- 10, for certain Bombardier, Inc. Model BD-100-1A10 (Challenger 300) airplanes. AD 2011-07-10 currently requires revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness; doing detailed visual inspections; removing discrepant material; cleaning the surfaces of the valves, the plug of the sensing port, and the cabin pressure-sensing port plug; securing the insulation; installing a new safety valve, and replacing certain cabin pressure-sensing port plugs. Since we issued AD 2011-07-10, we have received reports of in-flight loss of cabin pressurization that was attributed to partial blockage of a safety valve cabin pressure-sensing port in conjunction with a failed safety valve manometric capsule. This proposed AD would retain all requirements of AD 2011-07-10. This proposed AD would also require a detailed visual inspection of both safety valves and the surrounding area for foreign material, room temperature vulcanizing (RTV) silicone, contamination, foam on the bulkhead structure, tape or insulation, and loose material; and corrective actions if necessary. We are proposing this AD to detect and correct blockage of a safety valve cabin pressure-sensing port, which could result in loss of cabin pressure.

We are superseding Airworthiness Directive (AD) 2015-02-04 for certain Dassault Aviation Model MYSTERE-FALCON 50 airplanes. AD 2015- 02-04 required installing two protective plates between the electrical wiring under the glare shield and the engine fire pull handles. This new AD continues to require installing two protective plates between the electrical wiring under the glare shield and the engine fire pull handles. This AD was prompted by our determination that the published version of AD 2015-02-04 incorrectly identified the AD number as ``AD 2014-02-04'' in a certain paragraph. We are issuing this AD to prevent chafing of the electrical wiring, which could result in a short circuit and generation of smoke in the cockpit, potential loss of several functions essential for safe flight, and consequent reduced controllability of the airplane.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200, -200LR, -300ER, and 777F series airplanes. This AD was prompted by a report of a jettison fuel pump that was shut off by the automatic shutoff system during the center tank fuel scavenge process on a short-range flight and a subsequent failure analysis of the fuel scavenge system. This AD requires making wiring changes, modifying certain power panels, installing electrical load management system 2 (ELMS2) software, and accomplishing a functional test. We are issuing this AD to prevent extended dry running of the jettison fuel pumps, which can be a potential ignition source inside the main fuel tanks, and consequent fuel tank fire or explosion in the event that the jettison pump overheats or has an electrical fault.

We are adopting a new airworthiness directive (AD) for PILATUS Aircraft Ltd. Model PC-7 airplanes. This AD results from mandatory continuing airworthiness information (MCAI) issued by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as the potential for a spring on the air conditioning compressor clutch plate to shear the oil cooler inlet-hose due to the close routing of these parts without a protective cover. We are issuing this AD to require actions to address the unsafe condition on these products.

The Federal Aviation Administration (FAA) is considering a proposal to change a portion of the airport from aeronautical use to non-aeronautical use and to authorize the conversion of the airport property. The proposal consists of three parcels of land containing a total of approximately 240.80 acres located on the east side of the airport between South Portland Avenue and Interstate Highway 44. The parcel 52 was originally acquired under the following grant: Airport Development Aid Program (ADAP) No. 6-40-0072-76 in 1975. The parcel 51 was originally acquired under the following grant: Airport Development Program (AIP) No. 3-40-0072-23 in 1992. The parcel 46 was acquired by Trust funds only. The land comprising these parcels is outside the forecasted need for aviation development and, thus, is no longer needed for indirect or direct aeronautical use. The Airport wished to develop this land for compatible commercial, non-aeronautical use. The income from the conversion of these parcels will benefit the aviation community by reinvestment in the airport. Approval does not constitute a commitment by the FAA to financially assist in the conversion of the subject airport property nor a determination of eligibility for grant-in-aid funding from the FAA. The disposition of proceeds from the conversion of the airport property will be in accordance with FAA's policy and Procedures Concerning the Use of Airport Revenue, published in the Federal Register on February 16, 1999. In accordance with section 47107(h) of title 49, United States Code, this notice is required to be published in the Federal Register 30 days before modifying the land-use assurance that requires the property to be used for an aeronautical purpose.

This action announces the placement in the docket of a response to requests for clarification of the notice of proposed rulemaking (NPRM) published on January 8, 2015. In the NPRM, the U.S. Department of Transportation (DOT) and the FAA proposed to replace the Orders limiting scheduled operations at John F. Kennedy International Airport (JFK) and Newark Liberty International Airport (EWR), and limiting scheduled and unscheduled operations at LaGuardia Airport (LGA). The Orders are scheduled to expire when the rulemaking is final and in effect, but not later than October 29, 2016. The proposed rule is intended to provide a longer-term and comprehensive approach to slot management at JFK, EWR, and LGA. By letters posted to the public docket, Airlines for America and Sabre Corporation submitted questions regarding various provisions in the NPRM they believe need further clarification before meaningful comments can be submitted to the docket. The DOT and the FAA have reviewed these requests and a coordinated response has been placed in the docket. That document also responds to Airlines for America's renewed request for an extension of the comment period and request for a public meeting.

This rule establishes, amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures (ODPs) for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

This rule amends, suspends, or removes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide for the safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.

We propose to adopt a new airworthiness directive (AD) for all Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.) Model DHC-7-1 and DHC-7-100 airplanes. This proposed AD was prompted by reports of cracks that were discovered in the outboard nacelles upper longeron channels and angles. This proposed AD would require a one-time detailed visual inspection for cracking in the outboard nacelles upper longeron channels and angles; and repair if necessary. We are proposing this AD to detect and correct cracks in the outboard nacelles upper longeron channels and angles, which could lead to the loss of stiffness in the forward engine mount; and possible catastrophic failure.

We propose to adopt a new airworthiness directive (AD) for all The Boeing Company Model 767-200, -300, and -300F series airplanes. This proposed AD was prompted by a finding that certain barrel nuts installed at the vertical fin may be subject to stress corrosion and cracking. This proposed AD would require either repetitive inspections of vertical fin barrel nuts for corrosion or a magnetic check to identify certain barrel nuts, and corrective actions if necessary. We are proposing this AD to detect and correct corroded and loose barrel nuts that attach the vertical fin to body section 48, which could result in reduced structural integrity of the vertical fin attachment joint, loss of the vertical fin, and consequent loss of controllability of the airplane.

We propose to adopt a new airworthiness directive (AD) for certain serial number GE Aviation Czech s.r.o. M601E-11, M601E-11A, and M601F turboprop engines. This proposed AD was prompted by the determination that wear or cracking, and subsequent misalignment of the quill shaft of the engine and the power turbine (PT) shaft, may lead to rupture of the quill shaft, overspeed of the PT, and uncontained engine failure. This proposed AD would require inspection of the reduction gearbox and supporting cone. We are proposing this AD to prevent misalignment and rupture of the quill shaft, which could lead to overspeed of the PT, uncontained engine failure, and damage to the airplane.

The FAA proposes to rule and invite public comment on the release of land at the former Stapleton International Airport (SIA) under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).

The FAA proposes to rule and invite public comment on the release of land at the former Stapleton International Airport (SIA) under the provisions of Section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21), now 49 U.S.C. 47107(h)(2).

This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on December 4, 2014. The requested information is included in air carriers applications for insurance when insurance is not available from private sources.

In accordance with the Paperwork Reduction Act of 1995, FAA invites public comments about our intention to request the Office of Management and Budget (OMB) approval to renew an information collection. This survey assesses airman opinion of key dimensions of service quality of aeromedical certification services.

We are adopting a new airworthiness directive (AD) for certain Cessna Aircraft Company (Cessna) Model 402C and 414A airplanes. This AD requires repetitively inspecting the engine mount beams for cracks and contacting Cessna for FAA-approved corrective action if cracks are found. This AD also requires sending an inspection report to the FAA and to Cessna. This AD was prompted by reports of cracks found across the engine mount beams. We are issuing this AD to correct the unsafe condition on these products.

This action makes minor corrections to the boundary descriptions of restricted areas R-6703A, R-6703B, R-6703C, R-6703D, R- 6703E and R-6703F at Joint Base Lewis-McChord, WA. The changes are required due to a typographical error that occurred during publication of the final rule in the Federal Register.