Airworthiness Directives; Bombardier, Inc. Airplanes, 19570-19572 [2015-08073]

Download as PDF 19570 Federal Register / Vol. 80, No. 70 / Monday, April 13, 2015 / Proposed Rules Notice of proposed rulemaking; extension of public comment period. ACTION: The U.S. Department of Energy (DOE) has published a notice of proposed rulemaking (NOPR) and TSD (technical support document) that analyzes the potential economic impacts and energy savings that could result from potential energy conservation standards for hearth products. DOE published this NOPR and analysis so stakeholders can review the relevant outputs and the underlying assumptions and calculations. After receiving a request for additional time to comment, DOE has decided to extend the comment period for the NOPR pertaining to the energy conservation standards for hearth products until May 11, 2015. DATES: The comment period on the NOPR and TSD pertaining to the energy conservation standards for hearth products published in the Federal Register on February 9, 2015 (80 FR 7082) is extended, and comments must be postmarked by no later than May 11, 2015. ADDRESSES: Instructions: Any comments submitted must identify the NOPR for Energy Conservation Standards for Hearth Products, and provide docket number EERE–2014–BT–STD–0036 and/or regulatory information number (RIN) number 1904–AD35. Comments may be submitted using any of the following methods: 1. Federal eRulemaking Portal: www.regulations.gov. Follow the instructions for submitting comments. 2. Email: HearthHeatingProd2014STD0036@ ee.doe.gov. Include the docket number and/or RIN in the subject line of the message. Submit electronic comments in Word Perfect, Microsoft Word, PDF, or ASCII file format, and avoid the use of special characters or any form on encryption. 3. Postal Mail: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Office, Mailstop EE–5B, 1000 Independence Avenue SW., Washington, DC 20585–0121. If possible, please submit all items on a compact disc (CD), in which case it is not necessary to include printed copies. 4. Hand Delivery/Courier: Ms. Brenda Edwards, U.S. Department of Energy, Building Technologies Office, 950 L’Enfant Plaza SW., Suite 600, Washington, DC 20024. Telephone: (202) 586–2945. If possible, please submit all items on a CD, in which case it is not necessary to include printed copies. wreier-aviles on DSK5TPTVN1PROD with PROPOSALS SUMMARY: VerDate Sep<11>2014 15:39 Apr 10, 2015 Jkt 235001 No telefacsimilies (faxes) will be accepted. For detailed instructions on submitting comments and additional information on the rulemaking process, see the Public Participation section of the February 9, 2015 NOPR. Docket: The docket, which will include all relevant Federal Register notices, public meeting attendee lists and transcripts, comments, and other supporting documents/materials, is available for review at www.regulations.gov. All documents in the docket are listed in the www.regulations.gov index. However, some documents listed in the index may not be publically available, such as those containing information that is exempt from public disclosure. A link to the docket Web page can be found at: https://www1.eere.energy.gov/ buildings/appliance_standards/ rulemaking.aspx?ruleid=84. This Web page contains a link to the docket for this notice on the www.regulations.gov site. The www.regulations.gov Web page contains simple instructions on how to access all documents, including public comments, in the docket. See section VII, ‘‘Public Participation,’’ of the NOPR for further information on how to submit comments through www.regulations.gov. For further information on how to submit a comment, review other public comments and the docket, or participate in the public meeting, contact Ms. Brenda Edwards at (202) 586–2945 or by email: Brenda.Edwards@ee.doe.gov. FOR FURTHER INFORMATION CONTACT: Mr. John Cymbalsky, U.S. Department of Energy, Office of Energy Efficiency and Renewable Energy, Building Technologies Office, EE–5B, 1000 Independence Avenue SW., Washington, DC 20585–0121. Telephone: (202) 287–1692. Email: hearth_products@ee.doe.gov. Mr. Eric Stas, U.S. Department of Energy, Office of the General Counsel, GC–33, 1000 Independence Avenue SW., Washington, DC 20585–0121. Telephone: (202) 586–9507. Email: Eric.Stas@hq.doe.gov. SUPPLEMENTARY INFORMATION: DOE published a NOPR in the Federal Register to make available and invite public comments on its analysis regarding potential energy conservation standards for hearth products. 80 FR 7082 (Feb. 9, 2015). The document set a deadline for the submission of written comments by April 10, 2015. RH Peterson Co. requested an extension of the public comment period, stating that additional time is necessary to review the published analysis in order to prepare and submit comments. DOE has PO 00000 Frm 00004 Fmt 4702 Sfmt 4702 determined that extending the comment period to allow additional time for interested parties to submit comments is appropriate based on the foregoing reason. DOE believes that extending the comment period by 30 days will provide the public with sufficient time to submit comments responding to DOE’s analysis. Accordingly, DOE will consider any comments postmarked by May 11, 2015, and deems any comments received by that date to be timely submitted. Issued in Washington, DC, on April 1, 2015. Kathleen B. Hogan, Deputy Assistant Secretary for Energy Efficiency, Energy Efficiency and Renewable Energy. [FR Doc. 2015–08154 Filed 4–9–15; 4:15 pm] BILLING CODE 6450–01–P DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2015–0823; Directorate Identifier 2014–NM–211–AD] RIN 2120–AA64 Airworthiness Directives; Bombardier, Inc. Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for certain Bombardier, Inc. Model CL–600–2B19 (Regional Jet Series 100 & 440) airplanes. This proposed AD was prompted by results of a design review indicating that the burst pressure of the flexible hose, used to vent oxygen from the high-pressure relief valve of the oxygen cylinder overboard, was lower than the opening pressure of the highpressure relief valve, which could cause the flexible hose to burst before it can vent the excess oxygen overboard. This proposed AD would require replacing the oxygen hose assembly with a new, improved assembly. We are proposing this AD to prevent the accumulation of oxygen in an enclosed space, which could result in an uncontrolled oxygenfed fire if an ignition source is nearby. DATES: We must receive comments on this proposed AD by May 28, 2015. ADDRESSES: You may send comments by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. SUMMARY: E:\FR\FM\13APP1.SGM 13APP1 Federal Register / Vol. 80, No. 70 / Monday, April 13, 2015 / Proposed Rules • Fax: (202) 493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact Bombardier, ˆ Inc., 400 Cote-Vertu Road West, Dorval, ´ Quebec H4S 1Y9, Canada; telephone 514–855–5000; fax 514–855–7401; email thd.crj@aero.bombardier.com; Internet https://www.bombardier.com. You may view this referenced service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. wreier-aviles on DSK5TPTVN1PROD with PROPOSALS Examining the AD Docket You may examine the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 0823; or in person at the Docket Management Facility between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. The AD docket contains this proposed AD, the regulatory evaluation, any comments received, and other information. The street address for the Docket Operations office (telephone (800) 647–5527) is in the ADDRESSES section. Comments will be available in the AD docket shortly after receipt. FOR FURTHER INFORMATION CONTACT: Cesar Gomez, Aerospace Engineer, Airframe and Mechanical Systems Branch, ANE–171, FAA, New York Aircraft Certification Office, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone (516) 228–7318; fax (516) 794–5531. SUPPLEMENTARY INFORMATION: Comments Invited We invite you to send any written relevant data, views, or arguments about this proposed AD. Send your comments to an address listed under the ADDRESSES section. Include ‘‘Docket No. FAA–2015–0823; Directorate Identifier 2014–NM–211–AD’’ at the beginning of your comments. We specifically invite comments on the overall regulatory, economic, environmental, and energy aspects of this proposed AD. We will consider all comments received by the closing date and may amend this proposed AD based on those comments. VerDate Sep<11>2014 15:39 Apr 10, 2015 Jkt 235001 We will post all comments we receive, without change, to https:// www.regulations.gov, including any personal information you provide. We will also post a report summarizing each substantive verbal contact we receive about this proposed AD. Discussion Transport Canada Civil Aviation (TCCA), which is the airworthiness authority for Canada, has issued Canadian Airworthiness Directive CF– 2014–36, dated October 17, 2014 (referred to after this as the Mandatory Continuing Airworthiness Information, or ‘‘the MCAI’’), to correct an unsafe condition for certain Bombardier, Inc. Model CL–600–2B19 (Regional Jet Series 100 & 440) airplanes. The MCAI states: Design review found that the burst pressure of the flexible hose, used to vent oxygen from the high-pressure relief valve of the oxygen cylinder overboard, is lower than the opening pressure of the high-pressure relief valve. This could cause the flexible hose to burst before it is able to vent the excess oxygen overboard. If an ignition source is present, the accumulation of oxygen in an enclosed space may result in an uncontrolled oxygen-fed fire. This [Canadian] AD mandates the replacement of the oxygen hose assembly with a new design oxygen hose assembly. You may examine the MCAI in the AD docket on the Internet at https:// www.regulations.gov by searching for and locating Docket No. FAA–2015– 0823. Related Service Information Under 1 CFR Part 51 Bombardier has issued Service Bulletin 601R–35–018, dated May 21, 2013. The service information describes procedures for replacing the oxygen hose assembly with a new, improved assembly. The actions described in this service information are intended to correct the unsafe condition identified in the MCAI. This service information is reasonably available; see ADDRESSES for ways to access this service information. FAA’s Determination and Requirements of This Proposed AD This product has been approved by the aviation authority of another country, and is approved for operation in the United States. Pursuant to our bilateral agreement with the State of Design Authority, we have been notified of the unsafe condition described in the MCAI and service information referenced above. We are proposing this AD because we evaluated all pertinent information and determined an unsafe condition exists and is likely to exist or PO 00000 Frm 00005 Fmt 4702 Sfmt 4702 19571 develop on other products of the same type design. Costs of Compliance We estimate that this proposed AD affects 575 airplanes of U.S. registry. We also estimate that it would take about 2 work-hours per product to comply with the basic requirements of this proposed AD. Required parts would cost about $0 per product. The average labor rate is $85 per work-hour. Based on these figures, we estimate the cost of this proposed AD on U.S. operators to be $97,750, or $170 per airplane. According to the manufacturer, some of the costs of this proposed AD may be covered under warranty, thereby reducing the cost impact on affected individuals. We do not control warranty coverage for affected individuals. As a result, we have included all costs in our cost estimate Authority for This Rulemaking Title 49 of the United States Code specifies the FAA’s authority to issue rules on aviation safety. Subtitle I, section 106, describes the authority of the FAA Administrator. ‘‘Subtitle VII: Aviation Programs,’’ describes in more detail the scope of the Agency’s authority. We are issuing this rulemaking under the authority described in ‘‘Subtitle VII, Part A, Subpart III, Section 44701: General requirements.’’ Under that section, Congress charges the FAA with promoting safe flight of civil aircraft in air commerce by prescribing regulations for practices, methods, and procedures the Administrator finds necessary for safety in air commerce. This regulation is within the scope of that authority because it addresses an unsafe condition that is likely to exist or develop on products identified in this rulemaking action. Regulatory Findings We determined that this proposed AD would not have federalism implications under Executive Order 13132. This proposed AD would not have a substantial direct effect on the States, on the relationship between the national Government and the States, or on the distribution of power and responsibilities among the various levels of government. For the reasons discussed above, I certify this proposed regulation: 1. Is not a ‘‘significant regulatory action’’ under Executive Order 12866; 2. Is not a ‘‘significant rule’’ under the DOT Regulatory Policies and Procedures (44 FR 11034, February 26, 1979); 3. Will not affect intrastate aviation in Alaska; and E:\FR\FM\13APP1.SGM 13APP1 19572 Federal Register / Vol. 80, No. 70 / Monday, April 13, 2015 / Proposed Rules 4. Will not have a significant economic impact, positive or negative, on a substantial number of small entities under the criteria of the Regulatory Flexibility Act. List of Subjects in 14 CFR Part 39 Air transportation, Aircraft, Aviation safety, Incorporation by reference, Safety. The Proposed Amendment Accordingly, under the authority delegated to me by the Administrator, the FAA proposes to amend 14 CFR part 39 as follows: PART 39—AIRWORTHINESS DIRECTIVES 1. The authority citation for part 39 continues to read as follows: ■ Authority: 49 U.S.C. 106(g), 40113, 44701. § 39.13 [Amended] 2. The FAA amends § 39.13 by adding the following new airworthiness directive (AD): ■ Bombardier, Inc.: Docket No. FAA–2015– 0823; Directorate Identifier 2014–NM– 211–AD. (a) Comments Due Date We must receive comments by May 28, 2015. (b) Affected ADs None. (c) Applicability This AD applies to Bombardier, Inc. Model CL–600–2B19 (Regional Jet Series 100 & 440) airplanes, certificated in any category, serial numbers 7003 and subsequent. (d) Subject Air Transport Association (ATA) of America Code 35, Oxygen. wreier-aviles on DSK5TPTVN1PROD with PROPOSALS (e) Reason This AD was prompted by results of a design review indicating that the burst pressure of the flexible hose, used to vent oxygen from the high-pressure relief valve of the oxygen cylinder overboard, was lower than the opening pressure of the highpressure relief valve, which could cause the flexible hose to burst before it can vent the excess oxygen overboard. We are issuing this AD to prevent the accumulation of oxygen in an enclosed space, which could result in an uncontrolled oxygen-fed fire if an ignition source is nearby. (f) Compliance Comply with this AD within the compliance times specified, unless already done. (g) Replacement Before the accumulation of 5,800 total flight hours or within 44 months after the effective date of this AD, whichever occurs first, replace all oxygen hose assemblies VerDate Sep<11>2014 15:39 Apr 10, 2015 Jkt 235001 having part number (P/N) 38026–4–0280–000 with new, improved assemblies having P/N 601R44045–1, in accordance with the Accomplishment Instructions of Bombardier Service Bulletin 601R–35–018, dated May 21, 2013. (h) Parts Installation Prohibition As of the effective date of this AD, no person may install an oxygen hose assembly, P/N 38026–4–0280–000, on any airplane. (i) Other FAA AD Provisions The following provisions also apply to this AD: (1) Alternative Methods of Compliance (AMOCs): The Manager, New York Aircraft Certification Office (ACO), ANE–170, FAA, has the authority to approve AMOCs for this AD, if requested using the procedures found in 14 CFR 39.19. Send information to ATTN: Program Manager, Continuing Operational Safety, FAA, New York ACO, 1600 Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516–228–7300; fax 516–794–5531. Before using any approved AMOC, notify your appropriate principal inspector, or lacking a principal inspector, the manager of the local flight standards district office/ certificate holding district office. The AMOC approval letter must specifically reference this AD. (2) Contacting the Manufacturer: For any requirement in this AD to obtain corrective actions from a manufacturer, the action must be accomplished using a method approved by the Manager, New York ACO, ANE–170, FAA; or Transport Canada Civil Aviation (TCCA); or Bombardier, Inc.’s TCCA Design Approval Organization (DAO). If approved by the DAO, the approval must include the DAO-authorized signature. (j) Related Information (1) Refer to Mandatory Continuing Airworthiness Information (MCAI) Canadian Airworthiness Directive CF–2014–36, dated October 17, 2014, for related information. This MCAI may be found in the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA–2015–0823. (2) For service information identified in ˆ this AD, contact Bombardier, Inc., 400 Cote´ Vertu Road West, Dorval, Quebec H4S 1Y9, Canada; telephone 514–855–5000; fax 514– 855–7401; email thd.crj@ aero.bombardier.com; Internet https:// www.bombardier.com. You may view this service information at the FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information on the availability of this material at the FAA, call 425–227–1221. Issued in Renton, Washington, on March 27, 2015. Michael Kaszycki, Acting Manager, Transport Airplane Directorate, Aircraft Certification Service. [FR Doc. 2015–08073 Filed 4–10–15; 8:45 am] BILLING CODE 4910–13–P PO 00000 Frm 00006 Fmt 4702 Sfmt 4702 DEPARTMENT OF TRANSPORTATION Federal Aviation Administration 14 CFR Part 39 [Docket No. FAA–2015–0684; Directorate Identifier 2014–NM–215–AD] RIN 2120–AA64 Airworthiness Directives; Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.) Airplanes Federal Aviation Administration (FAA), DOT. ACTION: Notice of proposed rulemaking (NPRM). AGENCY: We propose to adopt a new airworthiness directive (AD) for all Viking Air Limited (Type Certificate Previously Held by Bombardier, Inc.) Model DHC–7–1 and DHC–7–100 airplanes. This proposed AD was prompted by reports of cracks that were discovered in the outboard nacelles upper longeron channels and angles. This proposed AD would require a onetime detailed visual inspection for cracking in the outboard nacelles upper longeron channels and angles; and repair if necessary. We are proposing this AD to detect and correct cracks in the outboard nacelles upper longeron channels and angles, which could lead to the loss of stiffness in the forward engine mount; and possible catastrophic failure. DATES: We must receive comments on this proposed AD by May 28, 2015. ADDRESSES: You may send comments, using the procedures found in 14 CFR 11.43 and 11.45, by any of the following methods: • Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments. • Fax: 202–493–2251. • Mail: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC 20590. • Hand Delivery: U.S. Department of Transportation, Docket Operations, M– 30, West Building Ground Floor, Room W12–140, 1200 New Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday through Friday, except Federal holidays. For service information identified in this proposed AD, contact Viking Air Limited, 9574 Hampden Road, Sidney, British Columbia V8L 8V5, Canada; telephone 250–656–7227; fax 250–656– 0673; email technical.publications@ vikingair.com; Internet https:// www.vikingair.com. You may view this SUMMARY: E:\FR\FM\13APP1.SGM 13APP1

Agencies

[Federal Register Volume 80, Number 70 (Monday, April 13, 2015)]
[Proposed Rules]
[Pages 19570-19572]
From the Federal Register Online via the Government Printing Office [www.gpo.gov]
[FR Doc No: 2015-08073]


=======================================================================
-----------------------------------------------------------------------

DEPARTMENT OF TRANSPORTATION

Federal Aviation Administration

14 CFR Part 39

[Docket No. FAA-2015-0823; Directorate Identifier 2014-NM-211-AD]
RIN 2120-AA64


Airworthiness Directives; Bombardier, Inc. Airplanes

AGENCY: Federal Aviation Administration (FAA), DOT.

ACTION: Notice of proposed rulemaking (NPRM).

-----------------------------------------------------------------------

SUMMARY: We propose to adopt a new airworthiness directive (AD) for 
certain Bombardier, Inc. Model CL-600-2B19 (Regional Jet Series 100 & 
440) airplanes. This proposed AD was prompted by results of a design 
review indicating that the burst pressure of the flexible hose, used to 
vent oxygen from the high-pressure relief valve of the oxygen cylinder 
overboard, was lower than the opening pressure of the high-pressure 
relief valve, which could cause the flexible hose to burst before it 
can vent the excess oxygen overboard. This proposed AD would require 
replacing the oxygen hose assembly with a new, improved assembly. We 
are proposing this AD to prevent the accumulation of oxygen in an 
enclosed space, which could result in an uncontrolled oxygen-fed fire 
if an ignition source is nearby.

DATES: We must receive comments on this proposed AD by May 28, 2015.

ADDRESSES: You may send comments by any of the following methods:
     Federal eRulemaking Portal: Go to https://www.regulations.gov. Follow the instructions for submitting comments.

[[Page 19571]]

     Fax: (202) 493-2251.
     Mail: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC 20590.
     Hand Delivery: U.S. Department of Transportation, Docket 
Operations, M-30, West Building Ground Floor, Room W12-140, 1200 New 
Jersey Avenue SE., Washington, DC, between 9 a.m. and 5 p.m., Monday 
through Friday, except Federal holidays.
    For service information identified in this proposed AD, contact 
Bombardier, Inc., 400 C[ocirc]te-Vertu Road West, Dorval, Qu[eacute]bec 
H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-7401; email 
thd.crj@aero.bombardier.com; Internet https://www.bombardier.com. You 
may view this referenced service information at the FAA, Transport 
Airplane Directorate, 1601 Lind Avenue SW., Renton, WA. For information 
on the availability of this material at the FAA, call 425-227-1221.

Examining the AD Docket

    You may examine the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2015-
0823; or in person at the Docket Management Facility between 9 a.m. and 
5 p.m., Monday through Friday, except Federal holidays. The AD docket 
contains this proposed AD, the regulatory evaluation, any comments 
received, and other information. The street address for the Docket 
Operations office (telephone (800) 647-5527) is in the ADDRESSES 
section. Comments will be available in the AD docket shortly after 
receipt.

FOR FURTHER INFORMATION CONTACT: Cesar Gomez, Aerospace Engineer, 
Airframe and Mechanical Systems Branch, ANE-171, FAA, New York Aircraft 
Certification Office, 1600 Stewart Avenue, Suite 410, Westbury, NY 
11590; telephone (516) 228-7318; fax (516) 794-5531.

SUPPLEMENTARY INFORMATION:

Comments Invited

    We invite you to send any written relevant data, views, or 
arguments about this proposed AD. Send your comments to an address 
listed under the ADDRESSES section. Include ``Docket No. FAA-2015-0823; 
Directorate Identifier 2014-NM-211-AD'' at the beginning of your 
comments. We specifically invite comments on the overall regulatory, 
economic, environmental, and energy aspects of this proposed AD. We 
will consider all comments received by the closing date and may amend 
this proposed AD based on those comments.
    We will post all comments we receive, without change, to https://www.regulations.gov, including any personal information you provide. We 
will also post a report summarizing each substantive verbal contact we 
receive about this proposed AD.

Discussion

    Transport Canada Civil Aviation (TCCA), which is the airworthiness 
authority for Canada, has issued Canadian Airworthiness Directive CF-
2014-36, dated October 17, 2014 (referred to after this as the 
Mandatory Continuing Airworthiness Information, or ``the MCAI''), to 
correct an unsafe condition for certain Bombardier, Inc. Model CL-600-
2B19 (Regional Jet Series 100 & 440) airplanes. The MCAI states:

    Design review found that the burst pressure of the flexible 
hose, used to vent oxygen from the high-pressure relief valve of the 
oxygen cylinder overboard, is lower than the opening pressure of the 
high-pressure relief valve. This could cause the flexible hose to 
burst before it is able to vent the excess oxygen overboard. If an 
ignition source is present, the accumulation of oxygen in an 
enclosed space may result in an uncontrolled oxygen-fed fire.
    This [Canadian] AD mandates the replacement of the oxygen hose 
assembly with a new design oxygen hose assembly.

    You may examine the MCAI in the AD docket on the Internet at https://www.regulations.gov by searching for and locating Docket No. FAA-2015-
0823.

Related Service Information Under 1 CFR Part 51

    Bombardier has issued Service Bulletin 601R-35-018, dated May 21, 
2013. The service information describes procedures for replacing the 
oxygen hose assembly with a new, improved assembly. The actions 
described in this service information are intended to correct the 
unsafe condition identified in the MCAI. This service information is 
reasonably available; see ADDRESSES for ways to access this service 
information.

FAA's Determination and Requirements of This Proposed AD

    This product has been approved by the aviation authority of another 
country, and is approved for operation in the United States. Pursuant 
to our bilateral agreement with the State of Design Authority, we have 
been notified of the unsafe condition described in the MCAI and service 
information referenced above. We are proposing this AD because we 
evaluated all pertinent information and determined an unsafe condition 
exists and is likely to exist or develop on other products of the same 
type design.

Costs of Compliance

    We estimate that this proposed AD affects 575 airplanes of U.S. 
registry.
    We also estimate that it would take about 2 work-hours per product 
to comply with the basic requirements of this proposed AD. Required 
parts would cost about $0 per product. The average labor rate is $85 
per work-hour. Based on these figures, we estimate the cost of this 
proposed AD on U.S. operators to be $97,750, or $170 per airplane.
    According to the manufacturer, some of the costs of this proposed 
AD may be covered under warranty, thereby reducing the cost impact on 
affected individuals. We do not control warranty coverage for affected 
individuals. As a result, we have included all costs in our cost 
estimate

Authority for This Rulemaking

    Title 49 of the United States Code specifies the FAA's authority to 
issue rules on aviation safety. Subtitle I, section 106, describes the 
authority of the FAA Administrator. ``Subtitle VII: Aviation 
Programs,'' describes in more detail the scope of the Agency's 
authority.
    We are issuing this rulemaking under the authority described in 
``Subtitle VII, Part A, Subpart III, Section 44701: General 
requirements.'' Under that section, Congress charges the FAA with 
promoting safe flight of civil aircraft in air commerce by prescribing 
regulations for practices, methods, and procedures the Administrator 
finds necessary for safety in air commerce. This regulation is within 
the scope of that authority because it addresses an unsafe condition 
that is likely to exist or develop on products identified in this 
rulemaking action.

Regulatory Findings

    We determined that this proposed AD would not have federalism 
implications under Executive Order 13132. This proposed AD would not 
have a substantial direct effect on the States, on the relationship 
between the national Government and the States, or on the distribution 
of power and responsibilities among the various levels of government.
    For the reasons discussed above, I certify this proposed 
regulation:
    1. Is not a ``significant regulatory action'' under Executive Order 
12866;
    2. Is not a ``significant rule'' under the DOT Regulatory Policies 
and Procedures (44 FR 11034, February 26, 1979);
    3. Will not affect intrastate aviation in Alaska; and

[[Page 19572]]

    4. Will not have a significant economic impact, positive or 
negative, on a substantial number of small entities under the criteria 
of the Regulatory Flexibility Act.

List of Subjects in 14 CFR Part 39

    Air transportation, Aircraft, Aviation safety, Incorporation by 
reference, Safety.

The Proposed Amendment

    Accordingly, under the authority delegated to me by the 
Administrator, the FAA proposes to amend 14 CFR part 39 as follows:

PART 39--AIRWORTHINESS DIRECTIVES

0
1. The authority citation for part 39 continues to read as follows:

    Authority: 49 U.S.C. 106(g), 40113, 44701.


Sec.  39.13  [Amended]

0
2. The FAA amends Sec.  39.13 by adding the following new airworthiness 
directive (AD):

Bombardier, Inc.: Docket No. FAA-2015-0823; Directorate Identifier 
2014-NM-211-AD.

(a) Comments Due Date

    We must receive comments by May 28, 2015.

(b) Affected ADs

    None.

(c) Applicability

    This AD applies to Bombardier, Inc. Model CL-600-2B19 (Regional 
Jet Series 100 & 440) airplanes, certificated in any category, 
serial numbers 7003 and subsequent.

(d) Subject

    Air Transport Association (ATA) of America Code 35, Oxygen.

(e) Reason

    This AD was prompted by results of a design review indicating 
that the burst pressure of the flexible hose, used to vent oxygen 
from the high-pressure relief valve of the oxygen cylinder 
overboard, was lower than the opening pressure of the high-pressure 
relief valve, which could cause the flexible hose to burst before it 
can vent the excess oxygen overboard. We are issuing this AD to 
prevent the accumulation of oxygen in an enclosed space, which could 
result in an uncontrolled oxygen-fed fire if an ignition source is 
nearby.

(f) Compliance

    Comply with this AD within the compliance times specified, 
unless already done.

(g) Replacement

    Before the accumulation of 5,800 total flight hours or within 44 
months after the effective date of this AD, whichever occurs first, 
replace all oxygen hose assemblies having part number (P/N) 38026-4-
0280-000 with new, improved assemblies having P/N 601R44045-1, in 
accordance with the Accomplishment Instructions of Bombardier 
Service Bulletin 601R-35-018, dated May 21, 2013.

(h) Parts Installation Prohibition

    As of the effective date of this AD, no person may install an 
oxygen hose assembly, P/N 38026-4-0280-000, on any airplane.

(i) Other FAA AD Provisions

    The following provisions also apply to this AD:
    (1) Alternative Methods of Compliance (AMOCs): The Manager, New 
York Aircraft Certification Office (ACO), ANE-170, FAA, has the 
authority to approve AMOCs for this AD, if requested using the 
procedures found in 14 CFR 39.19. Send information to ATTN: Program 
Manager, Continuing Operational Safety, FAA, New York ACO, 1600 
Stewart Avenue, Suite 410, Westbury, NY 11590; telephone 516-228-
7300; fax 516-794-5531. Before using any approved AMOC, notify your 
appropriate principal inspector, or lacking a principal inspector, 
the manager of the local flight standards district office/
certificate holding district office. The AMOC approval letter must 
specifically reference this AD.
    (2) Contacting the Manufacturer: For any requirement in this AD 
to obtain corrective actions from a manufacturer, the action must be 
accomplished using a method approved by the Manager, New York ACO, 
ANE-170, FAA; or Transport Canada Civil Aviation (TCCA); or 
Bombardier, Inc.'s TCCA Design Approval Organization (DAO). If 
approved by the DAO, the approval must include the DAO-authorized 
signature.

(j) Related Information

    (1) Refer to Mandatory Continuing Airworthiness Information 
(MCAI) Canadian Airworthiness Directive CF-2014-36, dated October 
17, 2014, for related information. This MCAI may be found in the AD 
docket on the Internet at https://www.regulations.gov by searching 
for and locating Docket No. FAA-2015-0823.
    (2) For service information identified in this AD, contact 
Bombardier, Inc., 400 C[ocirc]te-Vertu Road West, Dorval, 
Qu[eacute]bec H4S 1Y9, Canada; telephone 514-855-5000; fax 514-855-
7401; email thd.crj@aero.bombardier.com; Internet https://www.bombardier.com. You may view this service information at the 
FAA, Transport Airplane Directorate, 1601 Lind Avenue SW., Renton, 
WA. For information on the availability of this material at the FAA, 
call 425-227-1221.

    Issued in Renton, Washington, on March 27, 2015.
Michael Kaszycki,
Acting Manager, Transport Airplane Directorate, Aircraft Certification 
Service.
[FR Doc. 2015-08073 Filed 4-10-15; 8:45 am]
 BILLING CODE 4910-13-P
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.