Federal Aviation Administration March 11, 2008 – Federal Register Recent Federal Regulation Documents

Petition for Exemption; Summary of Petition Received
Document Number: E8-4801
Type: Notice
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.
Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800, and -900 Series Airplanes
Document Number: E8-4773
Type: Proposed Rule
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800, and -900 series airplanes. This proposed AD would require replacement of the power control relays in the P91 and P92 power distribution panels for the fuel boost and override pumps with new improved relays. This proposed AD would also require a revision to the Airworthiness Limitations (AWLs) section of the Instructions for Continued Airworthiness to incorporate AWL No. 28-AWL-20. This proposed AD results from fuel system reviews conducted by the manufacturer. We are proposing this AD to prevent pump housing burn-through due to electrical arcing, which could create a potential ignition source inside a fuel tank. This condition, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; Bombardier Model DHC-8-102, DHC-8-103, DHC-8-106, DHC-8-201, DHC-8-202, DHC-8-301, DHC-8-311, and DHC-8-315 Airplanes
Document Number: E8-4772
Type: Proposed Rule
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model DHC-8-400, DHC-8-401, and DHC-8-402 Airplanes
Document Number: E8-4771
Type: Proposed Rule
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2C10 (Regional Jet Series 700, 701 & 702), CL-600-2D15 (Regional Jet Series 705), and CL-600-2D24 (Regional Jet Series 900) Airplanes
Document Number: E8-4770
Type: Proposed Rule
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model CL-600-2B19 (Regional Jet Series 100 & 440) Airplanes
Document Number: E8-4769
Type: Proposed Rule
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain Bombardier Model CL-600-2B19 airplanes. The existing AD currently requires repetitive eddy current inspections for cracking of the main landing gear (MLG) main fittings, and replacement with new or serviceable MLG main fittings if necessary. The existing AD also currently requires servicing the MLG shock struts; inspecting the MLG shock struts for nitrogen pressure, visible chrome dimension, and oil leakage; and performing corrective actions, if necessary. This proposed AD would require replacement of the MLG main fittings with new improved MLG main fittings, which would terminate the repetitive inspections of the MLG main fittings and inspection and servicing of the MLG shock struts. This proposed AD results from premature failure of the MLG main fittings. We are proposing this AD to prevent failure of the MLG main fittings, which could result in collapse of the MLG upon landing.
Notice of Intent To Rule on Request To Release Airport Property at the Shafter-Minter Field Airport, Shafter, CA
Document Number: E8-4520
Type: Notice
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to rule and invite public comment on the release of land at the Shafter-Minter Field Airport under the provisions of section 125 of the Wendell H. Ford Aviation Investment Reform Act for the 21st Century (AIR 21).
RTCA Program Management Committee
Document Number: E8-4519
Type: Notice
Date: 2008-03-11
Agency: Federal Aviation Administration, Department of Transportation
The FAA is issuing this notice to advise the public of a meeting of the RTCA Program Management Committee.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.