Federal Aviation Administration August 31, 2007 – Federal Register Recent Federal Regulation Documents

Airplane Performance and Handling Qualities in Icing Conditions
Document Number: Z7-14937
Type: Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
Petition for Exemption; Summary of Petition Received
Document Number: E7-17371
Type: Notice
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of a petition seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Petitions for Exemption; Summary of Petitions Received
Document Number: E7-17370
Type: Notice
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
This notice contains a summary of certain petitions seeking relief from specified requirements of 14 CFR. The purpose of this notice is to improve the public's awareness of, and participation in, this aspect of FAA's regulatory activities. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of any petition or its final disposition.
Experimental Permits for Reusable Suborbital Rockets
Document Number: E7-17368
Type: Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
This notice announces the Office of Management and Budget's (OMB) approval of the information collection requirement in the final rule published April 6, 2007 (72 FR 17001). The sections of the final rule pending approval of this information collection request are effective on publication of this notice.
Proposed Establishment of Restricted Area 3405; Sullivan, IN
Document Number: E7-17361
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
This action proposes to establish Restricted Area 3405 (R- 3405) at Sullivan, IN. The United States (U.S.) Navy requests that the FAA take action to establish R-3405 for the protection of nonparticipating aircraft from a tethered aerostat balloon used to deploy radar, electro-optic, camera, and other sensor packages at Naval Support Activity (NSA) Crane's Glendora Lake Test Facility.
Airworthiness Directives; Fokker Model F.28 Mark 0070 and 0100 Airplanes
Document Number: E7-17296
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 767 Airplanes
Document Number: E7-17294
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Boeing Model 767 airplanes. This proposed AD would require a one-time inspection to determine the material of the forward and aft gray water drain masts. For airplanes having composite gray water drain masts, this proposed AD would also require installation of a ground bracket and a copper bonding jumper between a ground bracket and the clamp on the tube of the forward and aft gray water composite drain masts. This proposed AD results from a report of charred insulation blankets and burned wires around the forward gray water composite drain mast found during an inspection of the forward cargo compartment. We are proposing this AD to prevent a fire near a composite drain mast and possible disruption of the electrical power system caused by a lightning strike on a composite drain mast, which could result in the loss of several functions essential for safe flight.
Airworthiness Directives; Boeing Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
Document Number: E7-17290
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Boeing Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. For certain airplanes, this proposed AD would require replacing the outboard stabilizing fitting and certain adjacent components of the main landing gear (MLG) support beam. This proposed AD would also require repetitive inspections for discrepancies of the outboard stabilizing fitting, walking beam hanger, and rear spar attachment, and corrective actions if necessary. For certain airplanes, this proposed AD would provide an alternative one-time inspection of the outboard stabilizing fitting for discrepancies and corrective actions if necessary, which would extend the compliance time for the replacement of the outboard stabilizing fitting. For certain other airplanes, this proposed AD would also require performing a torque check of the aft pin of the outboard stabilizing fitting, and corrective actions if necessary. This proposed AD results from reports of findings of fatigue cracking of the outboard stabilizing fitting and stress corrosion cracking of the bolts attaching the fitting to the wing rear spar. We are proposing this AD to detect and correct that cracking, which could result in disconnection of the MLG actuator from the rear spar and support beam, and consequent damage to the hydraulic system causing hydraulic fluid leakage and loss of control of the airplane.
Airworthiness Directives; Alexandria Aircraft, LLC (Type Certificate No. 1A3 and A18CE Formerly Held by Bellanca, Inc.) Models 17-30, 17-31, 17-30A, 17-31A, and 17-31ATC Airplanes
Document Number: E7-17289
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
We propose to supersede Airworthiness Directive (AD) 76-23-03- R1, which applies to certain Alexandria Aircraft, LLC (Bellanca) Models 17-30, 17-31, 17-30A, 17-31A, and 17-31ATC airplanes. AD 76-23-03-R1 currently requires you to inspect the muffler and tailpipe assemblies for cracks and inspect the exhaust assembly for freedom of movement at the ball joints. Since we issued AD 76-23-03-R1, we have received additional reports of in-flight exhaust system failures. Consequently, this proposed AD would reduce the exhaust system inspection interval; require a more detailed inspection of the muffler; and require replacement, reconditioning, or repair of the exhaust system if cracks or defects are found. This proposed AD would also require rerouting of the magneto ``P'' leads. We are proposing this AD to detect and correct cracks in the exhaust system, which could result in heat damage to magneto electrical wiring and smoke in the cockpit. This failure could lead to loss of engine power and/or a fire in the engine compartment.
Airworthiness Directives; McDonnell Douglas Model DC-8-11, DC-8-12, DC-8-21, DC-8-31, DC-8-32, DC-8-33, DC-8-41, DC-8-42, and DC-8-43 Airplanes; Model DC-8F-54 and DC-8F-55 Airplanes; Model DC-8-50, -60, -60F, -70, and -70F Series Airplanes; Model DC-9-10, -20, -30, -40, and -50 Series Airplanes; Model DC-9-81 (MD-81), DC-9-82 (MD-82), DC-9-83 (MD-83), and DC-9-87 (MD-87) Airplanes; and Model MD-88 Airplanes
Document Number: E7-17287
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to supersede an existing airworthiness directive (AD) that applies to certain McDonnell Douglas airplanes. The existing AD currently requires an initial general visual or dye penetrant inspection, repetitive dye penetrant inspections, and replacement, as necessary, of the rudder pedal bracket. The existing AD also requires, for certain airplanes, replacing the rudder pedal bracket assemblies with new, improved parts, which would terminate the repetitive inspections. This proposed AD would, for certain airplanes, reduce initial inspection thresholds, remove an inspection option, and lengthen the repetitive inspection intervals. This proposed AD results from reports of failures of the captain's rudder pedal brackets before reaching the initial inspection threshold identified in the existing AD. We are proposing this AD to prevent failure of the rudder pedal bracket assembly, which could result in the loss of rudder and braking control at either the captain's or first officer's position.
Airworthiness Directives; Boeing Model 737-600, -700, -700C, -800 and -900 Series Airplanes
Document Number: E7-17285
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 737-600, -700, -700C, -800 and -900 series airplanes. This proposed AD would require repetitive lubrication of the left and right main landing gear (MLG) forward trunnion pins. This proposed AD would also require an inspection for discrepancies of the transition radius of the MLG forward trunnion pins, and repair or replacement if necessary. This proposed AD would also require a one- time inspection for discrepancies of the lead-in chamfer and cross-bolt bore, and repair or replacement if necessary. Doing the applicable inspections and repairs/replacements, or overhauling the trunnion pins ends the repetitive lubrication requirements of this proposed AD. This proposed AD results from a report that the protective finishes on the forward trunnion pins for the left and right MLG might have been damaged during final assembly. We are proposing this AD to prevent cracking of the forward trunnion pin, which could result in fracture of the pin and consequent collapse of the MLG.
Airworthiness Directives; Boeing Model 747 Airplanes
Document Number: E7-17284
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 747 airplanes. This proposed AD would require inspecting the trunnion fork assembly of the wing landing gears to determine the part number and serial number and to determine the category of the trunnion fork assemblies. For certain airplanes, this proposed AD also would require, if necessary, various inspections to detect discrepancies of the trunnion fork assemblies, related investigative/corrective actions, and a terminating action. This proposed AD results from a report of a fractured trunnion fork assembly. We are proposing this AD to prevent a fractured trunnion fork assembly, which could result in the collapse of a wing landing gear on the ground and possible damage to hydraulic equipment and the aileron and spoiler cables. Such damage could result in reduced controllability of the airplane.
Airworthiness Directives; Boeing Model 737-100, -200, and -200C Series Airplanes
Document Number: E7-17283
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for all Boeing Model 737-100, -200, and -200C series airplanes. This proposed AD would require revising the FAA-approved maintenance inspection program to include inspections that will give no less than the required damage tolerance rating for each structural significant item (SSI), doing repetitive inspections to detect cracks of all SSIs, and repairing cracked structure. This proposed AD results from a report of incidents involving fatigue cracking and corrosion in transport category airplanes that are approaching or have exceeded their design service goal. We are proposing this AD to ensure the continued structural integrity of the entire fleet of Model 737-100, -200, and - 200C series airplanes.
Airworthiness Directives; Bombardier Model DHC-8-102, -103, -106, -201, -202, -301, -311, and -315 Airplanes
Document Number: E7-17282
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
We propose to adopt a new airworthiness directive (AD) for the products listed above. This proposed AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 757-200, -200CB, and -300 Series Airplanes
Document Number: E7-17280
Type: Proposed Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA proposes to adopt a new airworthiness directive (AD) for certain Boeing Model 757-200, -200CB, and -300 series airplanes. This proposed AD would require doing a detailed inspection for damage of the wire bundle of the right recirculation fan, and repair if necessary. This proposed AD would also require re-routing the wire bundle of the right recirculation fan. This proposed AD results from a report indicating that, during landing of a Model 757 airplane, an overheat warning and smoke occurred in the main cabin, and the right recirculation fan stopped operating. We are proposing this AD to prevent damage of the wiring bundle of the right recirculation fan. Such damage could result in a short circuit and possible fire in the mix bay or smoke in the main cabin.
Airworthiness Directives; Pratt & Whitney JT9D-7R4 Turbofan Engines
Document Number: E7-17210
Type: Rule
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA is superseding an existing airworthiness directive (AD) for Pratt & Whitney (PW) JT9D-7R4 turbofan engines. That AD currently requires inspection of the blade root thickness of 1st stage fan blades identified by part number (P/N) and serial number (SN) in the AD. This AD requires the same actions but corrects 12 P/Ns, adds 10 part SNs, and adds the definition of next fan blade exposure to the compliance section. This AD results from the discovery of inaccurate part quantity, part numbers, and serial numbers used in AD 2005-26-09. We are issuing this AD to prevent 1st stage fan blade fracture and uncontained engine failure, resulting in possible damage to the airplane.
Agency Information Collection Activity Seeking OMB Approval
Document Number: 07-4289
Type: Notice
Date: 2007-08-31
Agency: Federal Aviation Administration, Department of Transportation
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on June 15, 2007, vol. 72, no. 115, page 33276. 14 CFR part 21 prescribes certification standards for aircraft, aircraft engines, propellers, products, and parts. The information collected is used to determine compliance and applicant eligibility.
This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.