National Highway Traffic Safety Administration June 2005 – Federal Register Recent Federal Regulation Documents
Results 1 - 13 of 13
Federal Motor Vehicle Safety Standards; Hydraulic and Electric Brake Systems
This document amends the Federal motor vehicle safety standard on hydraulic and electric brake systems to extend the current minimum performance requirements and associated test procedures for parking brake systems to all multipurpose passenger vehicles (MPVs), buses and trucks with gross vehicle weight ratings (GVWR) greater than 10,000 pounds (4,536 kilograms) equipped with hydraulic or electric brake systems. Currently, the only vehicles with GVWRs greater than 10,000 pounds to which the standard's parking brake requirements apply are school buses. The agency concludes that it is in the interest of safety to require all MPVs, buses and trucks with GVWRs over 10,000 pounds to have parking brakes that meet the performance requirements currently applicable to heavy school buses.
General Motors Corporation, Receipt of Petition for Decision of Inconsequential Noncompliance
Federal Motor Vehicle Safety Standards; Child Restraint Systems
Federal Motor Vehicle Safety Standard (FMVSS) No. 213, ``Child restraint systems,'' requires that the webbing of child restraints must not lose more than a specified percentage of its original breaking strength as a result of being exposed to certain adverse conditions. The standard currently does not specify a minimum breaking strength for the unexposed webbing. This document proposes such a minimum, as well as a minimum breaking strength requirement for the exposed webbing. It also makes clearer in the text of FMVSS No. 213 that the heavier of two weights specified in the standard is used to abrade the webbing used to attach child restraint systems to the child restraint anchorages located in a vehicle.
Federal Motor Vehicle Safety Standards; Designated Seating Positions and Seat Belt Assembly Anchorages
We are proposing to amend the definition of ``designated seating position'' in the Federal motor vehicle safety standards (FMVSSs), and to establish a new procedure for determining the number of designated seating positions on bench and split bench seats. This document also proposes to apply that procedure to all types of vehicles, regardless of weight, and eliminate the existing exclusion for temporary or folding jump seats. The proposed rule would also revise test procedures for seat belt anchorage requirements so that they are suitable for side-facing, temporary or folding jump seats. NHTSA's goal in proposing these amendments is to improve the objectivity of the ``designated seating position'' definition and thereby facilitate efforts of the agency to ensure that the number of designated seating positions and occupant restraint systems in a vehicle is representative of real world occupancy. The proposed rule would also revise the general incorporation by reference provision for the FMVSSs by providing a centralized index of all matters therein incorporated by reference.
Coupled Products, Inc., Grant of Petition for Decision of Inconsequential Noncompliance
Vehicle Safety Hotline; Technical Amendment
This document contains technical amendments to Part 571, Federal motor vehicle safety standards; Part 575, Consumer information; Part 577, Defect and noncompliance notification; and Part 582, Insurance cost information regulation. Specifically, we are updating the telephone number that should be used to reach NHTSA's Vehicle Safety Hotline, and adding our web address. This amendment updates the pertinent contact information without making any substantive changes to our regulations.
Two- and Three-Wheeled Vehicles
This document sets forth a draft interpretation concerning whether certain two- and three-wheeled vehicles are ``motor vehicles'' and thus subject to the Federal motor vehicle safety standards and to other vehicle safety requirements. Physical characteristics previously relied upon by the agency are no longer reliable determinants of whether a two- or three-wheeled vehicle is a ``motor vehicle.'' Additionally, the vehicles that were the subject of past agency interpretations are no longer representative of the two- and three- wheeled vehicles on the market today. For these reasons, and because vehicle designs continue to change and proliferate, manufacturers, importers, and import specialists from U.S. Customs and Border Protection (Customs) are requesting interpretations from NHTSA as to whether various two- and three-wheeled vehicles are ``motor vehicles.'' This document would address the issues raised in those types of requests.
Equistar Chemicals, LP, Receipt of Petition for Decision of Inconsequential Noncompliance
Les Entreprises Michel Corbeil Inc., Grant of Petition for Decision of Inconsequential Noncompliance
Notice of Receipt of Petition for Decision That Nonconforming 2005 Smart Car Passion, Pulse, and Pure (Coupe and Cabriolet) Passenger Cars Are Eligible for Importation
This document announces receipt by the National Highway Traffic Safety Administration (NHTSA) of a petition for a decision that 2005 Smart Car Passion, Pulse, and Pure (coupe and cabriolet) passenger cars that were not originally manufactured to comply with all applicable Federal motor vehicle safety standards are eligible for importation into the United States because they have safety features that comply with, or are capable of being altered to comply with, all such standards.
Porsche Cars North America, Inc., Grant of Petition for Decision of Inconsequential Noncompliance
Mercedes-Benz USA LLC, Receipt of Petition for Decision of Inconsequential Noncompliance