Federal Aviation Administration May 11, 2016 – Federal Register Recent Federal Regulation Documents

The Federal Aviation Administration (FAA) is requesting public comment on the Susquehanna Area Regional Airport Authority's (SARAA) request to change 11.398 acres of airport property from aeronautical use to non-aeronautical use. The acreage in question is subject to the Provisions of the Federal Property and Administrative Services Act of 1949, and the Surplus Property Act of 1944 as amended. In accordance with 49 U.S.C. 47151(d), 47153(c), and 47107(h), this notice is required to be published in the Federal Register for 30 days before waiving the condition that such land be used for aeronautical purposes. The purpose of the release request is to enable SARAA to generate revenue from this property by taking action including, but not limited to, entering into a long-term lease with Shaner Hotel Holdings for the purpose of constructing and operating a four (4) story hotel consisting of 120 guest rooms, a meeting center and restaurant.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

This notice contains a summary of a petition seeking relief from specified requirements of Title 14 of the Code of Federal Regulations. The purpose of this notice is to improve the public's awareness of, and participation in, the FAA's exemption process. Neither publication of this notice nor the inclusion or omission of information in the summary is intended to affect the legal status of the petition or its final disposition.

We propose to supersede Airworthiness Directive (AD) 2005-13- 30, which applies to all Boeing Model 737-100, -200, and -200C series airplanes. AD 2005-13-30 currently requires repetitive inspections to detect discrepancies of certain fuselage skin panels located just aft of the wheel well, and repair if necessary. Since we issued AD 2005-13- 30, an evaluation by the design approval holder (DAH) indicates that the fuselage skin is subject to widespread fatigue damage (WFD), and we have received reports of cracks at the chem-milled steps in the fuselage skin. This proposed AD would add new fuselage skin inspections for cracking, inspections to detect missing or loose fasteners and any disbonding or cracking of bonded doublers, permanent repairs of time- limited repairs, related investigative and corrective actions if necessary, and skin panel replacement. We are proposing this AD to detect and correct fatigue cracking of the fuselage skin panels, which could cause rapid decompression of the airplane.

We are adopting a new airworthiness directive (AD) for certain The Boeing Company Model 777-200 and -300 series airplanes equipped with Rolls-Royce Trent 800 series engines. This AD was prompted by reports of heat damage to the strut aft fairing heat shield primary seal, as well as heat and wear damage to the heat shield insulation blankets. This AD requires repetitive inspections for cracks and heat damage to the strut aft fairing lower spar web structure (a flammable fluid zone barrier), for wear to the heat shield primary seal, and, as applicable, for heat and wear damage to heat shield insulation blankets; and related investigative and corrective actions if necessary. This AD also provides optional terminating action for the repetitive inspections. We are issuing this AD to detect and correct cracks and heat damage to the strut aft fairing lower spar web structure (a flammable fluid zone barrier), wear to the heat shield primary seal, and heat and wear damage to heat shield insulation blankets, which could lead to through-cracks in the aft fairing lower web structure and heating of the aft fairing lower web structure, and consequent uncontrolled fire in the aft fairing, fuel tank ignition or possible departure of the engine.

We are adopting a new airworthiness directive (AD) for Viking Air Limited Model DHC-3 airplanes that are modified with the Baron Short Take Off and Landing (STOL) kit (Supplemental Type Certificate SA94-114 or SA 00287NY). This AD results from mandatory continuing airworthiness information (MCAI) issued by the aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as a center of gravity that is too far aft contributing to a stall during takeoff and loss of control during other phases of flight. We are issuing this AD to require actions to address the unsafe condition on these products.

We propose to supersede Airworthiness Directive (AD) 2015-05- 02, for certain Airbus Model A318, A319, A320, and A321 series airplanes. AD 2015-05-02 requires revising the maintenance or inspection program to incorporate new, more restrictive airworthiness limitations. Since we issued AD 2015-05-02, an evaluation by the design approval holder (DAH) indicates that principal structural elements and certain life limited parts are subject to widespread fatigue damage (WFD). This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate new or revised structural inspection requirements. We are proposing this AD to prevent fatigue cracking, accidental damage, or corrosion in principal structural elements, and WFD, which could result in reduced structural integrity of the airplane.

We propose to supersede Airworthiness Directive (AD) 2007-11- 13, which applies to all The Boeing Company Model 717-200 airplanes. AD 2007-11-13 currently requires revising the Airworthiness Limitations Section (ALS) of the Instructions for Continued Airworthiness to incorporate new removal limits for certain components of the flap system and to reduce the inspection interval s for fatigue cracking of principal structural elements (PSE). Since we issued AD 2007-11-13, a new Airworthiness Limitations Instructions (ALI) revision was released that incorporates nondestructive inspection (NDI) techniques and reduced repetitive inspection intervals for three PSEs. We have determined that these reduced intervals are necessary to address the unsafe condition. This proposed AD would require revising the maintenance or inspection program, as applicable, to incorporate reduced intervals for the inspections for three PSEs and add NDI techniques to the inspection process. We are proposing this AD to detect and correct fatigue cracking of certain PSEs. Such cracking could adversely affect the structural integrity of the airplane.