Federal Aviation Administration December 31, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 10 of 10
Airworthiness Directives; General Electric Company (GE) CF34-1A, CF34-3A, and CF34-3B Series Turbofan Engines; Delay of Effective Date
The FAA is delaying the effective date of the final rule airworthiness directive (AD) 2009-24-11, which published in the Federal Register, for an additional 30 days, from January 4, 2010 to February 3, 2010. The FAA is delaying the effective date to allow us a sufficient amount of time to make corrections to the compliance text of the final rule.
Establishment of a Special Air Traffic Rule in the Vicinity of Luke Air Force Base (AFB), AZ
This rule establishes a Special Air Traffic Rule (SATR) in the vicinity of Luke Air Force Base (Luke) which requires aircraft operating under visual flight rules (VFR) to establish two-way radio communication with the Luke Radar Approach Control (RAPCON) prior to entering the SATR area and maintain communication while operating in the area. The SATR is active during official daylight hours Monday through Friday while Luke pilot flight training is underway, as broadcast on the local Automatic Terminal Information Service (ATIS), and other times by Notice to Airmen (NOTAM). This action is necessary
Airworthiness Directives; Engine Components, Inc. (ECi) Reciprocating Engine Cylinder Assemblies
The FAA is superseding an existing airworthiness directive (AD) for Lycoming Engines (formerly Textron Lycoming) models 320, 360, and 540 series, ``Parallel Valve'' reciprocating engines, with certain Engine Components, Inc. (ECi) cylinder assemblies, part number (P/N) AEL65102 series ``Titan,'' installed. That AD currently requires initial and repetitive visual inspections and compression tests to detect cracks at the head-to-barrel interface, replacement of cylinder assemblies found cracked, and replacement of certain cylinder assemblies at new, reduced times-in-service. This AD requires the same actions, but for an expanded population of cylinder assemblies. This AD results from reports of 10 additional cylinder head separations since issuing AD 2008-19-05, on cylinder serial numbers not listed in that AD. We are issuing this AD to prevent loss of engine power due to cracks at the head-to-barrel interface and possible engine failure caused by separation of a cylinder head, which could result in loss of control of the aircraft.
Airworthiness Directives; McDonnell Douglas Corporation Model MD-11 and MD-11F Airplanes
We are adopting a new airworthiness directive (AD) for certain Model MD-11 and MD-11F airplanes. This AD requires a one-time inspection to determine if wires touch the upper surface of the center upper auxiliary fuel tank and marking the location, if necessary; a one-time inspection of all wire bundles above the center upper auxiliary fuel tank for splices and damage; a one-time inspection for damage to the fuel vapor barrier seal and upper surface of the center upper auxiliary fuel tank; and corrective actions, if necessary. This AD also requires installation of nonmetallic barrier/shield sleeving, new clamps, new attaching hardware, and a new extruded channel. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Airworthiness Directives; Construcciones Aeronauticas, S.A. (CASA), Model CN-235, CN-235-100, CN-235-200, and CN-235-300 Airplanes
We are superseding an existing airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 170 Airplanes, and Model ERJ 190-100 LR, -100 IGW, -100 STD, -200 STD, -200 LR, and -200 IGW Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Airbus Model A380-841, -842, and -861 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; McDonnell Douglas Corporation Model DC-10-10, DC-10-10F, DC-10-15, DC-10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, DC-10-40F, MD-10-10F, and MD-10-30F Airplanes
The FAA is superseding an existing airworthiness directive (AD), which applies to certain Model DC-10-10, DC-10-10F, DC-10-15, DC- 10-30, DC-10-30F (KC-10A and KDC-10), DC-10-40, and DC-10-40F airplanes. That AD currently requires installing or replacing with improved parts, as applicable, the bonding straps between the metallic frame of the fillet and the wing leading edge ribs, on both the left and right sides of the airplane. This new AD revises the applicability by adding and removing certain airplanes. This new AD requires, for certain airplanes, repositioning or replacing two bonding straps, and doing a bonding-resistance check and an inspection to determine correct installation of certain bonding straps, and applicable corrective actions. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to reduce the potential of ignition sources inside fuel tanks in the event of a severe lightning strike, which, in combination with flammable fuel vapors, could result in fuel tank explosions and consequent loss of the airplane.
Airworthiness Directives; The Boeing Company Model 737-100, -200, -200C, -300, -400, and -500 Series Airplanes
The FAA is revising an existing airworthiness directive (AD), which applies to all Model 737-100, -200, -200C, -300, -400, and -500 series airplanes. That AD currently requires revising the FAA-approved maintenance program to incorporate new airworthiness limitations (AWLs) for fuel tank systems to satisfy Special Federal Aviation Regulation No. 88 requirements. That AD also requires an initial inspection to phase in certain repetitive AWL inspections, and repair if necessary. This AD clarifies the intended effect of the AD on spare and on-airplane fuel tank system components. That AD results from a design review of the fuel tank system. We are issuing this AD to prevent the potential for ignition sources inside fuel tanks caused by latent failures, alterations, repairs, or maintenance actions, which, in combination with flammable fuel vapors, could result in a fuel tank explosion and consequent loss of the airplane.
Amendment of Class E Airspace; Myrtle Beach, SC
This action changes the airport name for the Myrtle Beach, SC, Class E airspace area from Myrtle Beach AFB, to Myrtle Beach International Airport. This action also will update the geographic coordinates of the airports within the controlled airspace.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
