Federal Aviation Administration November 23, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 8 of 8
Flight Crewmember Duty Period Limitations, Flight Time Limitations and Rest Requirements; Withdrawal
The FAA is withdrawing a previously published NPRM that proposed to establish one set of duty period limitations, flight time limitations, and rest requirements for flight crewmembers engaged in air transportation. The NPRM also proposed to establish consistent and clear duty period limitations, flight time limitations, and rest requirements for domestic, flag, supplemental, commuter and on-demand operations. We are withdrawing the NPRM because it is outdated and because of the many significant issues commenters raised. The FAA
Part 121 Activation of Ice Protection
This action would amend the regulations applicable to operators of certain airplanes used in Title 14 Code of Federal Regulations part 121 operations and certificated for flight in icing conditions. The proposed standards would require either the installation of ice detection equipment or changes to the Airplane Flight Manual to ensure timely activation of the airframe ice protection system. This proposed regulation is the result of information gathered from a review of icing accidents and incidents, and it is intended to improve the level of safety when airplanes are operated in icing conditions.
Airworthiness Directives; Rolls-Royce Corporation AE 3007A1/1, AE 3007A1/3, AE 3007A1, AE 3007A1E, AE 3007A1P, AE 3007A3, AE 3007C, and AE 3007C1 Turbofan Engines
The FAA is adopting a new airworthiness directive (AD) for Rolls-Royce Corporation (RRC) AE 3007A1/1, AE 3007A1/3, AE 3007A1, AE 3007A1E, AE 3007A1P, AE 3007A3, AE 3007C, and AE 3007C1 turbofan engines with a fan spinner part number (P/N) 23070964 or P/N 23078783, installed. This AD requires replacement of the fan spinner. This AD results from a report of a fan spinner releasing from an AE 3007A turbofan engine, during flight. We are issuing this AD to prevent the fan spinner from releasing, which could result in injury, damage to the engine, and damage to the airplane.
Airworthiness Directives; General Electric Company (GE) CF34-8E Series Turbofan Engines
The FAA is superseding an existing airworthiness directive (AD) for GE CF34-8E series turbofan engines with certain part number (P/N) full authority digital electronic controls (FADECs) installed. That AD currently requires removing certain P/N FADECs. This superseding AD requires removal of 12 more P/Ns of FADECs. This AD results from 20 additional reports received of loss of thrust control events since AD 2008-16-01 was issued. We are issuing this AD to prevent loss of thrust control of the airplane.
Airworthiness Directives; Fokker Model F.28 Mark 0070, 0100, 1000, 2000, 3000, and 4000 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above that would revise an existing AD. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Agency Information Collection Activity Seeking OMB Approval
The FAA invites public comments about our intention to request the Office of Management and Budget's (OMB) revision of a current information collection. The Federal Register Notice with a 60-day comment period soliciting comments on the following collection of information was published on September 8, 2009, vol. 74, no. 172, page 46292. FOQA is a voluntary program for the routine collection and analysis of digital flight data from airplane operations.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This rule establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
Standard Instrument Approach Procedures, and Takeoff Minimums and Obstacle Departure Procedures; Miscellaneous Amendments
This establishes, amends, suspends, or revokes Standard Instrument Approach Procedures (SIAPs) and associated Takeoff Minimums and Obstacle Departure Procedures for operations at certain airports. These regulatory actions are needed because of the adoption of new or revised criteria, or because of changes occurring in the National Airspace System, such as the commissioning of new navigational facilities, adding new obstacles, or changing air traffic requirements. These changes are designed to provide safe and efficient use of the navigable airspace and to promote safe flight operations under instrument flight rules at the affected airports.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.