Federal Aviation Administration March 24, 2009 – Federal Register Recent Federal Regulation Documents
Results 1 - 14 of 14
RTCA Special Committee 147 Sixty Ninth Plenary: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 147: Minimum Operational Performance Standards for Traffic Alert and Collision Avoidance Systems Airborne Equipment.
Third Meeting-RTCA Special Committee 217/EUROCAE WG 44-Airport Mapping Databases
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 217 meeting: Airport Mapping Databases
Fourteenth Meeting: RTCA Special Committee 203/Minimum Performance Standards for Unmanned Aircraft Systems and Unmanned Aircraft
The FAA is issuing this notice to advise the public of a meeting of RTCA Special Committee 203, Minimum Performance Standards for Unmanned Aircraft Systems and Unmanned Aircraft.
Airworthiness Directives; Airbus Model A310 Series Airplanes and Model A300-600 Series Airplanes
This airworthiness directive (AD) supersedes two existing ADs. One AD applies to certain Airbus Model A310-200 and -300 series airplanes. That AD currently requires repetitive inspections for cracking of the flap transmission shafts, and replacement of the transmission shafts if necessary. That AD also provides an optional terminating action for the repetitive inspections. The other existing AD applies to all Airbus Model A300 B4-600, B4-600R, and F4-600R series airplanes, and Model C4-605R Variant F airplanes (collectively called A300-600 series airplanes); and Model A310-200 and -300 series airplanes. That AD currently requires a one-time inspection of the trimmable horizontal stabilizer actuator (THSA), corrective actions if necessary, and follow-on repetitive tasks. This new AD also requires revising the Airworthiness Limitations Section of the Instructions for Continued Airworthiness to incorporate new limitations and maintenance tasks for aging systems maintenance. This AD results from the manufacturer's determination that life limitations and maintenance tasks are necessary to ensure continued operational safety of the affected airplanes. We are issuing this AD to prevent reduced structural integrity of these airplanes due to the failure of system components.
Airworthiness Directives; Bombardier Model CL-600-1A11 (CL-600), CL-600-2A12 (CL-601), and CL-600-2B16 (CL-601-3A, CL-601-3R, and CL-604) Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Empresa Brasileira de Aeronautica S.A. (EMBRAER) Model ERJ 190 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Bombardier Model DHC-8-102, -103, and -106 Airplanes, and Model DHC-8-200, -300, and -400 Series Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 757-200, 757-200PF, and 757-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 757-200, 757-200PF, and 757-300 series airplanes. This AD requires, for certain airplanes, measuring the electrical bond resistance at certain stations and doing any applicable repair; installing support brackets for the hot short protector and new support clamps for the wire bundles; installing the equipment of the hot short protector; and modifying an existing wire bundle and installing a new wire bundle. This AD also requires, for certain other airplanes, measuring the electrical bond resistance at certain stations, measuring the electrical bonding resistance between the hot short protector and rear spar web, and doing any applicable repair. This AD also requires revising the Airworthiness Limitations section of the Instructions for Continued Airworthiness. This AD results from fuel system reviews conducted by the manufacturer. We are issuing this AD to prevent the center fuel tank densitometer from overheating and becoming a potential ignition source inside the fuel tank, which, in combination with flammable fuel vapors, could result in a center fuel tank explosion and consequent loss of the airplane.
Airworthiness Directives; Boeing Model 767-200 and 767-300 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 767-200 and 767-300 series airplanes. This AD requires detailed inspections of the aft pressure bulkhead for damage, mid- frequency eddy current (MFEC) and low frequency eddy current (LFEC) inspections of radial web lap splices, tear strap splices, and super tear strap splices for cracking, and corrective actions if necessary. This AD results from analysis that indicates fatigue cracks of the web lap splice, tear strap splice, or super tear strap splice of the aft bulkhead are expected to occur on certain Boeing Model 767-200 and 767- 300 series airplanes. We are issuing this AD to detect and correct fatigue cracks of the aft pressure bulkhead, which could result in rapid decompression of the passenger compartment and possible damage or interference with airplane control systems that penetrate the bulkhead, and consequent loss of controllability of the airplane.
Airworthiness Directives; Airbus Model A318, A319, A320, and A321 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Fokker Model F.27 Mark 050 Airplanes
The FAA is superseding an existing airworthiness directive (AD) that applies to certain Fokker Model F.27 Mark 050 airplanes. The existing AD currently requires repetitive visual checks for oil leaks of both engines between the spinner and the engine cowling, and directly behind the heated intake lip of the engine; repetitive inspections for oil leaks at the feathering pump on both engines; and corrective actions if necessary. This new AD retains the requirements of the existing AD. This AD also requires replacing the outlet port (high-pressure) bobbin with a new, improved outlet port (high-pressure) bobbin, which terminates the repetitive visual checks and inspections. This AD results from reports of oil leakage at the engine feathering pump. We are issuing this AD to prevent oil loss from the feathering pump, which could cause the engine to shut down in flight.
Airworthiness Directives; Boeing Model 727-100 and 727-200 Series Airplanes
We are adopting a new airworthiness directive (AD) for certain Boeing Model 727-100 and 727-200 series airplanes. This AD requires repetitive internal and external high frequency eddy current, mid frequency eddy current, low frequency eddy current, and magneto optic imaging inspections to detect cracks, corrosion, delamination, and materials loss in the lower fastener row of the lower skin and the upper fastener row of the upper skin, and corrective actions if necessary. This AD results from a report of decompression in a Boeing Model 737 airplane at flight level 290. We are issuing this AD to detect and correct scratches and excessive reduction in material thickness from excessive blend-out or corrosion, which could lead to premature cracking in the lap joint. Such cracking could adversely affect the structural integrity of the airplane.
Airworthiness Directives; 328 Support Services GmbH Dornier Model 328-100 Airplanes
We are adopting a new airworthiness directive (AD) for the products listed above. This AD results from mandatory continuing airworthiness information (MCAI) originated by an aviation authority of another country to identify and correct an unsafe condition on an aviation product. The MCAI describes the unsafe condition as:
Airworthiness Directives; Boeing Model 767 Airplanes
The FAA is adopting a new airworthiness directive (AD) for certain Boeing Model 767 airplanes. This AD requires repetitive inspections for cracking of the wing skin, and related investigative/ corrective actions if necessary. This AD results from reports of cracks found in the lower wing skin originating at the forward tension bolt holes of the aft pitch load fitting. We are issuing this AD to detect and correct cracking in the lower wing skin for the forward tension bolt holes at the aft pitch load fitting, which could result in a fuel leak and reduced structural integrity of the airplane.
This site is protected by reCAPTCHA and the Google
Privacy Policy and
Terms of Service apply.
